Dynavap mod based heater

[kingscar]

Quartz dab tube with a silicone ring.

Tube in the Beast, glass straw for sipping the vapor

Here's the straw attached to a 14/20 joint
This works as a micro dab rig. Half a rice grain size piece of shatter was great. CO2 oil works ok but haven't gotten dense clouds,
I sent two of these out today so we can get some feedback and see if this is worth working on.

A couple of dynavap wpa set ups. On the left a 14/10 and on the right a 14/20 joint. I only got a few of these made but could retail them for $15

This looked great, so I ordered it! What Mods would you recommend for this? Also, I hope I don't get hit with fees for being in the EU

 

[mistvaporizer]

This looked great, so I ordered it! What Mods would you recommend for this? Also, I hope I don't get hit with fees for being in the EU

I've only used an evic mini and cuboid mini. Basically any mod 75 watts or more is fine.

 

[paytonpenn]

This looked great, so I ordered it! What Mods would you recommend for this? Also, I hope I don't get hit with fees for being in the EU

Personally I suggest anything with NFETeams Arctic Fox firmware support as it just has a great ability for configuration even if you do only need 13 second intervals around 40 watts. I can't imagine anyone using a box mod with that firmware wanting to actually switch to something else.

https://nfeteam.org/

 

[koepen]

I read in the Simrell Vortex thread that some members prefer a SS tip when using induction heaters... anybody experienced an advantage for SS tip over ttip when using the Beast?

 

[mistvaporizer]

I read in the Simrell Vortex thread that some members prefer a SS tip when using induction heaters... anybody experienced an advantage for SS tip over ttip when using the Beast?

The Beast is not induction. It is a kanthal element. Should work the same with ti or ss

 

[koepen]

The Beast is not induction. It is a kanthal element. Should work the same with ti or ss

Jep, I know it‘s not induction ...thought that maybe someone noticed a difference...

 

[mistvaporizer]

@koepen i misread the post
Maybe @paytonpenn or @antispleen can comment. I've only used ss

 

[kingscar]

Just received it, I can hear something loose in the beast sliding up and down, is it worth trying to open it up to see what that could be? (Also got dinged with £18 customs charge for anyone thinking of ordering to UK)

 

[Easywider]

Just received it, I can hear something loose in the beast sliding up and down, is it worth trying to open it up to see what that could be? (Also got dinged with £18 customs charge for anyone thinking of ordering to UK)

I believe it's the insulator plate. I think it just kinda floats between the Beastly coil and the 510 deck where the leads screw in.

 

[mistvaporizer]

@kingscar the rattle is normal
It is the ceramic disc that prevents the dv from sitting on the 510 deck. There should of been an instruction sheet that explains that.
Here is a link to the instructions
http://www.mistvaporizer.com/beast

 

[kingscar]

@kingscar the rattle is normal
It is the ceramic disc that prevents the dv from sitting on the 510 deck. There should of been an instruction sheet that explains that.
Here is a link to the instructions
http://www.mistvaporizer.com/beast

Glad to hear it's all normal! The device looks beautiful btw.
Are there any instructions on how to use the quartz banger or the whip?

 

[mistvaporizer]

Glad to hear it's all normal! The device looks beautiful btw.
Are there any instructions on how to use the quartz banger or the whip?

Here is an ig link using the banger tube
https://www.instagram.com/p/B25NvnwH6pJ/?igshid=18v95r48ubjv1
Lately i have been using 25 watts start hitting at 30 seconds. I've gone as high as 46 watts but i like the lower watts.

 

[mistvaporizer]

The Beast it's a mod based heater for the dynavap system. It is comprised of a kanthal coil that surrounds the dv, the coil is protected by a SS shield and a wood cover.
Here is a cover in wenge

Here is a video using our water adapter
http://instagr.am/p/B0rb2utnuA9/
Beast FC OG thread

 

[notams]

This looks cool. Don't know why it hasn't been before. Fantastic idea.

 

[RustyOldNail]

This looks cool. Don't know why it hasn't been before. Fantastic idea.

Have you seen the price?

 

[Nomad #111]

Have you seen the price?

I dont own one but they look pretty. I thought the price was fair.

 

[notams]

@MistVape I have a Lost Vape Triade DNA 250C box mod that can run custom profiles if you're interested in more beta testers.

 

[mistvaporizer]

@MistVape I have a Lost Vape Triade DNA 250C box mod that can run custom profiles if you're interested in more beta testers.

Thanks but we have been in production mode for a while now.

 

[notams]

Thanks but we have been in production mode for a while now.

Well, I'm gonna definitely check you out. I don't do IG at all. No FB either. But, I'll use my wife's acct. Thanks for the heads up on this profuct.

 

[lordtinuviel]

Need some help, I got the Beast but for some reason I'm getting atomizer not found after few hits, normally after 5 or more hits....I have try a different mod, same thing....any ideas??