Dynavap mod based heater

[Abysmal Vapor]

Great to see you giving your own twist to those concepts .
There have been couple of builds both for vaponic and dynavap similar to yours. There is one in the project thread and i think there was another in the cork corner thread,where photos are sadly no longer available.
Also @supershredderdan did it a while ago with Mutation X5 atty .
https://imgur.com/a/jagKo

 

[mistvaporizer]

That is abv from the vaponic
13 seconds at 40 watts then 20watts for up to a minute in 13 second cycles back to back.
No huge dense clouds but nice vapor and with less than 0.1 g i am nicely medicated

 

[mistvaporizer]

Getting better at this. The location of the coil is critical. Too high or low doesn't work very well but in the middle it roasts nicely. I have not produced dense clouds but very effective and tasty clouds

 

[Monk Debate]

With all the talk of an incoming Dynavap official IH being underwhelming, the Beast is looking more and more like the superior portable Vapcap heating solution.

 

[mistvaporizer]

With all the talk of an incoming Dynavap official IH being underwhelming, the Beast is looking more and more like the superior portable Vapcap heating solution.

appreciate the sentiment.
At first i thought i was "competing" with IH but realized the Beast has some cool features all is own. So it's a very interesting option imo, but I'm biased.....

 

[PPN]

The Vaponic mod is very interesting for me since I love this vape!

A few days ago I dismantled a vape by Atman (Almighty), the bowl was wrapped with an unknow coil (and was kept in place with a ton of glued tape!), I kept that coil, done a burn-off (and there was a ton of smoke from the glue) using a spare deck from a QQ (coil is between 0.29 and 0.33).

I shapped that coil like @mistvaporizer (not so straight) and got a very good session using my vaponic loaded with wax. At 33w initial heatup was around 20s (but I didn't timer that), coil was quickly (after 7-8s) red hot so I ended pulsing power on-off to avoid any overheating and only draw while power is off (to avoid any invisible fumes from the coil comes in the airpath). I don't think a red hot coil is a problem here especially if used like I did, I kept the Vaponic inserted during all the session (I have to do it carefully cause I didn't built any shield for now).

Coil is made of 2 unknows wires in parallel kept in place by a very basic electrical clip like you can find in every machine, not something made to be in a airpath for sure (wires are very difficult to bent, not like the SS I'm used to handle... if it can helps you to know which sort of wires it is). Basically a sort of one wire coil made of 2 wires solded/clipped together.

Thank you @mistvaporizer for the trick!

 

[mistvaporizer]

@PPN thank @Plutonic his idea. Actually sent the beta to him. I figure a vaponic expert could do better than me. Excited to hear his results, maybe I'll offer these

 

[Plutonic]

@PPN thank @Plutonic his idea.

Hardly my idea, it's been floating around for a long time, but I'm delighted to help test this build. I'll keep you posted!

 

[mistvaporizer]

Quartz dab tube with a silicone ring.

Tube in the Beast, glass straw for sipping the vapor

Here's the straw attached to a 14/20 joint
This works as a micro dab rig. Half a rice grain size piece of shatter was great. CO2 oil works ok but haven't gotten dense clouds,
I sent two of these out today so we can get some feedback and see if this is worth working on.

A couple of dynavap wpa set ups. On the left a 14/10 and on the right a 14/20 joint. I only got a few of these made but could retail them for $15

 

[mistvaporizer]

Here is a link to a video on ig using the Beast and the quartz tubes to vape CO2 oil
https://www.instagram.com/p/B2FZCaUHjpU/?igshid=22sloupwoh0v

 

[mistvaporizer]

Shatter in the Beast banger tube. Did a 26 second preheat at 46 watts and then the next 13 second cycle and beyond was massive clouds.
https://www.instagram.com/p/B2UgyWanoY6/?utm_source=ig_web_copy_link

 

[mistvaporizer]

Announced a bundle deal.
Beast, beaded stem, dv ss tip and cap, fat mp, wpa, baber tube, glass straw and tubing for the whip.
In the store now $160
Just made the coupon permanent on the Beast, now listed at $130

 

[Easywider]

Announced a bundle deal.
Beast, beaded stem, dv ss tip and cap, fat mp, wpa, baber tube, glass straw and tubing for the whip.
In the store now $180

That's a killer deal, fully functional custom Dynavap plus the Beast heater and accessories to boot!
Your killing me here! I'm weak man!

 

[mistvaporizer]

Got to experimenting with the vaponic again. Used 26 gauge tri braid ss wire. Here's is an ig post showing coil and abv
https://www.instagram.com/p/B2fHoWWnCYe/?igshid=1hh6tv3gtd8sw

Didn't try tc mod yet

 

[mistvaporizer]

Here is the vaponic in action
https://www.instagram.com/p/B2hjyg8nN8Z/?igshid=2gqbkd4l95oc
Did a 45 watt pre heat then down to 30 watts for vaping.
TC is possible but i haven't tried yet

 

[oddjobold]

Ill be picking up my beast tonight. Will use it friday. I will post my thoughts once i have some!

 

[sickmanfraud]

My BEAST arrived today. At this point, all I can say is "wow" Heated up the vapcap with amazing results!!

I will write more after more experimentation.

Out of the box twist on a mod (Using Sinous P80 for starters) and it works!!!

 

[mistvaporizer]

Got a new limited edition Econo Beast. Using imported ss coil decks like this

Mounted the ss in a maple holder fitted the coil and ceramic spacer.

Fully functional Beast.
Still offering the original Beast which has custom made gold plated, copper/silver electrodes. There is no plastic in the heating chamber.
The downside of the imported deck is having the plastic insulator on the deck.
The Econo Beast is in the store at $85
Here it is in action
https://www.instagram.com/p/B2mP8lrnbJB/?igshid=icdrc83g1pdc
There are only 8 available

 

[Easywider]

Snagged one!!!

 

[oddjobold]

My first impressions comparing to a portside mini.

Portside mini works better. Heats up quicker more consistant. However its not pocket sized.

The beast is better in every other way. More portable, truley pocket sized (with the right mod). Replacable batteries, more adjustable.

If you want something truley portable, get a beast. If you want a desktop or home portable get a IH.

Overall i am happy - as i did want a portable.

Does have a very small learning curve.

 

[mistvaporizer]

My first impressions comparing to a portside mini.

Portside mini works better. Heats up quicker more consistant. However its not pocket sized.

The beast is better in every other way. More portable, truley pocket sized (with the right mod). Replacable batteries, more adjustable.

If you want something truley portable, get a beast. If you want a desktop or home portable get a IH.

Overall i am happy - as i did want a portable.

Does have a very small learning curve.

Does IH allow for varying the power? I use mine at 40 watts and get consistent abv, 35 watts gives a lighter abv and 45 chars.
I really like that feature

 

[oddjobold]

Stardust salor stem
The beast on sinous P80 (about half the size of a portside mini)
Siren brewery - santo. Dry hopped larger (my favorite pint)

Enjoying the last warmth of summer.

Dont get me wrong i am enjoying my beast. Its a truly portable vapcap heater. Not really comfortable using my vapcap out and about with a lighter, looks too dodgy.

Only tried on 45w so far i will lower the watts to 40 and see what happens.

45w the bowl did seem to finish very quickly.

Edit:

Currently running sur myevic on the p80. Thinking artic fox with the double click cruise mode could be better. I will install when i get a chance.

 

[Easywider]

Stardust salor stem
The beast on sinous P80 (about half the size of a portside mini)
Siren brewery - santo. Dry hopped larger (my favorite pint)

Enjoying the last warmth of summer.

Dont get me wrong i am enjoying my beast. Its a truly portable vapcap heater. Not really comfortable using my vapcap out and about with a lighter, looks too dodgy.

Only tried on 45w so far i will lower the watts to 40 and see what happens.

45w the bowl did seem to finish very quickly.

Edit:

Currently running sur myevic on the p80. Thinking artic fox with the double click cruise mode could be better. I will install when i get a chance.

Thanks for sharing your first impressions! Was really looking to hear from someone in the community who has experience with a popular IH.

Have a Beast on the way and will be running on the same mod, same color and it's already loaded with AF.
Should be a great travel companion. I can fly with a VapCap but not a torch lighter.

 

[mistvaporizer]

I run af and have my auto cruise set for 12 sec. Two cycles for the first hit then single cycles are great for re heats. This is at 40 watts

@oddjobold I was really just curious if IH can vary the power or if it is on/off.
Also it will be great to have someone that has used IH to evaluate the Beast.

 

[oddjobold]

I run af and have my auto cruise set for 12 sec. Two cycles for the first hit then single cycles are great for re heats. This is at 40 watts

@oddjobold I was really just curious if IH can vary the power or if it is on/off.
Also it will be great to have someone that has used IH to evaluate the Beast.

Generally its on off with most models. The click is nearer 10 seconds on a PSM without the same level of charring. I sold my portside mini as it was too big, and not portable enough.

I tried out 35w and 40w. 35w takes too long to click for me. 40w gave less charing and nicer hits than 45w. I think 40w will be my go to from now on.