If you like the OG Switch you're going to LOVE Switch2. The best device we've ever made by a long shot! Really looking forward to hearing the feedback from this community.While I'm waiting on my 2 to arrive.
Dr Dabber Switch 2
- Thread starter Dr.Dabber
- Start date
Did you use the Code VG10 to get 10% off (courtesy of VapeGuys review below), the unit looks great, especially the full/proper temp control!While I'm waiting on my 2 to arrive.
Last edited:
Code didn't work when I purchased yesterdayDid you use the Code VG10 to get 10% off (courtesy of VapeGuys review below), the unit looks great, especially the full/proper temp control!
hd_rider
Well-Known Member
The original intent of the Switch1 was to give the user the option of using either concentrates or flower in the device. However, real-world use shows that the Switch1 sucks for vaping flower. IMO, you need convection when vaping flower, not conduction.
In the blitz surrounding the announcement of the Switch2, I have not seen anything about how the new device works with flower.
In the blitz surrounding the announcement of the Switch2, I have not seen anything about how the new device works with flower.
He mentioned it works but is not advertised. The quartz is big enough to do it in the 2. It works in the one but there is a leaning curve. Induction heating in the devices is unmatched for concentrates. Just in my opinion.
Just in my opinion.
Hoodwink
Member
Didn’t work for me either on Puffco site. However, it DID work on Vape-Smart!
I have a question for the OP.
Why design the joystick with a hole in the top of it when 99% of people using a joystick put their finger on top of the joystick to move it in circular motions?
Seems counterintuitive to good air flow during your sesh.
I like that it is magnetic instead of cheap silicon tether, but that air hole on the top seems a bit wonky.
Why design the joystick with a hole in the top of it when 99% of people using a joystick put their finger on top of the joystick to move it in circular motions?
Seems counterintuitive to good air flow during your sesh.
I like that it is magnetic instead of cheap silicon tether, but that air hole on the top seems a bit wonky.
Piecho
Well-Known Member
I like the idea behind the design. Induction heating compared with replicable glass insert should give pleasant experience and easy to maintain in clean. I like that approach much more, than ceramic chambers used in most of the e-rigs. Also really appreciate how much customisation you could put into your session. I've been asking some manufactures about custom heating curves, but nobody wanted to talk about that potential feature.
Also would like to see cap with air vortex, like in Core 2.0 for example. With addition of terp ball I see it now as my favourite way to consume concentrates. One hand, with joystick you have to use both and will get less constant experience/evaporation in my opinion.
Also would like to see cap with air vortex, like in Core 2.0 for example. With addition of terp ball I see it now as my favourite way to consume concentrates. One hand, with joystick you have to use both and will get less constant experience/evaporation in my opinion.
Hopefully, they will add SiC, ruby, etc as options in the future for very easy maintenance and a bit different vapor taste/profile.
Vapeaction
Well-Known Member
OK, I had it in my cart... I always get nervous when customs gets involved from US to Canada... bit of a crap shoot when it comes to duty, brokerage fees and taxes ... really takes all the fun out of getting a new vape.
We already plan on pushing an update down the line that will allow full control over the heating curves. In the meantime I'm loving descent mode i generally have mine dialed in on 480 to start on a 50 second hold time and ends at around 425 ish. Last hit tastes just as good if not better than the first hit and nice easy clean. Also enjoying starting at around 400 on ascent and ramping that up and ending at around 460 for a more cold start approach. Also looks like people are already in the process of designing some caps/glass for it so that should be exciting to see.
Can't spell Keurig without Erig
But in all seriousness we actually designed this to look like a home appliance, to fit on the countertop next to your keurigs or your ps5/xbox.. It's meant to be a countertop device for your home, why not blend in and take some of that stigma away. Also at the end of the day this unit is strictly about performance. We could have made the aesthetics what everyone was used to but then we would have limited ourselves on the functionality. We are using handblown glass instead of the new industry standard of (checks notes) metal? Which everyone seems super ok with all of the sudden, The airflow we found after testing both styles was much better and more consistent with the top airflow. The knurling adds a space where you can easily pinch from the outside using your thumb and index finger. Also a feature that seems to be overlooked is the magnetic cap also serves a function. You can flick that or lift that up at any point in your hit to actually clear your Switch like you would a bong. I find myself clearing multiple times during the hit which to me is much more satisfying than the standard suck until theres nothing left that's standard in the erig game.
---------------------------------------
Here is my elevator pitch breakdown of the Switch 2:
- Zero Atomizers.
We’ve replaced them with a 20mm quartz dish (think of it as a "banger"). Keep it clean, and it will last a lifetime. It’s easy to maintain with 90%+ isopropyl alcohol or by torching it. - Gr2 Titanium Cup with Embedded Design.
The Ti cup is seamlessly integrated into the unit—no exposed coils, silicones, or electronics in the air path for a pure vapor experience. - Omnidirectional Induction Heating.
Heat wraps around from every angle, eliminating hotspots and ensuring smooth, even vaporization. Paired with an IR sensor, the Switch 2 constantly monitors temperature, making it the most precise erig on the market. - Dynamic Heating Modes:
These innovative modes give users total control over their sessions:- Steady Mode: Like most erigs, it maintains a constant temperature during the hit. The downside? As the dab diminishes, the temperature stays the same, potentially compromising flavor at the end making it taste like an oven.
- Ascent Mode: Simulates a cold-start torch dab by gradually increasing the temperature by 1.5°F per second. Start low for intense terpene flavors, and finish with thick, milky clouds—a personal favorite for full-spectrum hits.
- Descent Mode (default setting): Perfectly replicates a traditional dab. The unit rises to your selected temperature, then decreases by 1°F per second. This ensures peak flavor throughout the hit, rivaling any erig on the market.
- Effortless Cleaning:
Restore your Switch 2 to like-new condition in under five minutes—just use 90%+ ISO and torch the banger. It doesn’t get easier than that.
Is there an admin that can move this topic into portable vaporizers since this isnt a plugin device?
The button control is now very simple. Plus, minus and power.
Here are some reviews that go over size/UI/ease of use and cleaning etc:
https://www.greenstate.com/lifestyle/dr-dabber-switch2/
Dr. Dabber Switch 2 Review - Tools420 USA
As a fan of Dr. Dabber, I was excited to try the new Dr. Dabber Switch 2 after waiting six long years since the original. With all the buzz around it, I
biohacker
HREAM
That's because of the military precision possible with stainless, ti, etc. vs boro which has a tolerance of approximately .5mm. And as you know, size matters incredibly when it comes to airflow. Also doesn't break, can use after market airflow inserts, etc.
Since there is ambient air flowing through it, do you think you could tell the difference in a blind test?