Doughboy Glass

[CrazyDiamond]

It's rare these days that you come across people like that...like us. As was stated, FC has the most community/neighborly/friendly I can't come up with the best "word" to describe it here...some damn good peeps here.

 

[BoogerMan]

Idk if this would be possible or if anyone would be interested, but FC should host a convention somewhere (Colorado or Washington preferably lol) once a year for everyone to get together and chill. They could get a bunch of sponsors and have booths and food and samples, oh my! FC could make it one of the largest vaporizer conventions in the world!


I would love to meet all of you guys. I'm amazed how nice and helpful everyone is here. There are very few assholes on this forum. When I read on some other sites it amazes me how rude, uptight, and ignorant some people are. The mods on FC do the best job around keeping these negative vibes to a minimum.

Thanks again @PoopMachine, the Mrs., and Trey

@CrazyDiamond and @Cannabis Connoisseur I want to know what the hell you are getting made!!!! Secrets don't make friends haha.

 

[Cannabis Connoisseur]

That's so cool, and to think all these good things

Idk if this would be possible or if anyone would be interested, but FC should host a convention somewhere (Colorado or Washington preferably lol) once a year for everyone to get together and chill. They could get a bunch of sponsors and have booths and food and samples, oh my! FC could make it one of the largest vaporizer conventions in the world!


I would love to meet all of you guys. I'm amazed how nice and helpful everyone is here. There are very few assholes on this forum. When I read on some other sites it amazes me how rude, uptight, and ignorant some people are. The mods on FC do the best job around keeping these negative vibes to a minimum.

Thanks again @PoopMachine, the Mrs., and Trey

@CrazyDiamond and @Cannabis Connoisseur I want to know what the hell you are getting made!!!! Secrets don't make friends haha.

Hell I don't even know!! It's just that damn CLASSIFIED!!! I'll be sure to post pics though!! It's only a Hydratube!!!!

 

[Caligula]

There are very few assholes on this forum.

Sorry, my bad.

 

[CrazyDiamond]

Sorry, my bad.

Huh? I hope you're not implying that you are, cuz you're not an ahole bro, in fact, just the opposite...or were you making a funny...if the later, then yes funny and I'm sorry for f'n that up if I did.

@BoogerMan I will tell you this...it is not a recycler of any kind...it will have a pretty big can on it and a couple 2-3 percs (3rd perc is PM's idea to prevent splash...and a good idea at that). It will be modeled after a very popular style that is made by a well known manufacturer of scientific glass, M****s, 'cept it will have some color, drip, etch, flair, I don't f'n know cuz I'm letting PM, Mrs PM, and Trey work out the artistic side of it since I am like a Vulcan when it comes to that stuff....I've already said too much, lol

 

[PoopMachine]

I think he's being a wise ass

@VapeNStone and @Deadhead101 , you guys both have tracking numbers for your pieces. Tuesday should be a good day for both of you guys.

Enjoy!

Idk if this would be possible or if anyone would be interested, but FC should host a convention somewhere (Colorado or Washington preferably lol) once a year for everyone to get together and chill. They could get a bunch of sponsors and have booths and food and samples, oh my! FC could make it one of the largest vaporizer conventions in the world!


I would love to meet all of you guys. I'm amazed how nice and helpful everyone is here. There are very few assholes on this forum. When I read on some other sites it amazes me how rude, uptight, and ignorant some people are. The mods on FC do the best job around keeping these negative vibes to a minimum.

Thanks again @PoopMachine, the Mrs., and Trey

@CrazyDiamond and @Cannabis Connoisseur I want to know what the hell you are getting made!!!! Secrets don't make friends haha.

Im amazed this hasnt happened. Ive helped organize things like this, it could be made to happen. Might help me convince Mrs P to take a vacation.

 

[CrazyDiamond]

hmmmm we should get @sasNW to host...he's said free samples to all FC'rs...he's in Seattle, recovering from a very tragic event caused by his negligent "friend". Opposite side of the country than me but so what...I'll fly if it could happen.
Or maybe there's someone from Colorado...only time will tell.
But, I know I've already stated that if I ever get a huge inheritance or hit the lotto, I will go on tour and want to meet a bunch of you.

 

[pootsforjesus]

Huh? I hope you're not implying that you are, cuz you're not an ahole bro, in fact, just the opposite...or were you making a funny...if the later, then yes funny and I'm sorry for f'n that up if I did.

@BoogerMan I will tell you this...it is not a recycler of any kind...it will have a pretty big can on it and a couple 2-3 percs (3rd perc is PM's idea to prevent splash...and a good idea at that). It will be modeled after a very popular style that is made by a well known manufacturer of scientific glass, M****s, 'cept it will have some color, drip, etch, flair, I don't f'n know cuz I'm letting PM, Mrs PM, and Trey work out the artistic side of it since I am like a Vulcan when it comes to that stuff....I've already said too much, lol

Oh damn! I spoke with PM to get a recycler hydratube, but if the M****s company is who I think it is (of the m****x perc variety ), I was initially going to see if that could be done as well! I'm super pumped to see what you and Trey have cooking up now.

 

[CrazyDiamond]

Damn it...too many hints!!! Nah I'm just playin'... @BoogerMan has been so forthcoming in what he asks for in designing the pieces he gets that I wanted to share...and ya, being secretive was to just get the juices flowing, hehe. Besides, I wanted to kinda hint at what the basic design is so you guys don't think Trey can only make recyclers...he can do much more based on the discussions PM and I have had. I think we are going to see something really special when this particular project is done....might be a little while guys before we see it, and that's cool cuz I want him, PM, and Mrs PM to take their time in the artistic side of the design.

 

[blankrider]

Convention sounds amazing! We could all wear name tags with our forum name. It would be amazing to see everyone from young to old and of every race all together to celebrate our love of vaping and amazing friendship that we have found with this community.

Let's not just talk about it, let's make it happen

 

[Deadhead101]

Getting another piece made, a recycler just like CrazyDiamond's. I went to all 4 major headshops in my town today, and of the 5 total recyclers I saw, all of them were at least $300, up to $600, for basic, though sometimes brand name, glass....I think I'll drop a couple hundred less for a semi-worked and probably equally if not better functioning glass.

Thanks Trey and PM, can't wait to get my new pieces!

 

[BoogerMan]

Holy smokes I'm away from my computer for a few hours and this thread blew up! Here we go

Sorry, my bad.

Haha you good sir are definitely not an ass. More like one of the most helpful members on this forum!

@BoogerMan I will tell you this...it is not a recycler of any kind...it will have a pretty big can on it and a couple 2-3 percs (3rd perc is PM's idea to prevent splash...and a good idea at that). It will be modeled after a very popular style that is made by a well known manufacturer of scientific glass, M****s, 'cept it will have some color, drip, etch, flair, I don't f'n know cuz I'm letting PM, Mrs PM, and Trey work out the artistic side of it since I am like a Vulcan when it comes to that stuff....I've already said too much, lol

I knew I would get it out of you! I can't wait to see this. Sounds freaking awesome!!!! It will be nice to see what Trey can do besides recyclers and kleins.
Why can't I just hit the lotto already so I can give Trey thousands of dollars to be my personal glass blower

hmmmm we should get @sasNW to host...he's said free samples to all FC'rs...he's in Seattle, recovering from a very tragic event caused by his negligent "friend". Opposite side of the country than me but so what...I'll fly if it could happen.
Or maybe there's someone from Colorado...only time will tell.
But, I know I've already stated that if I ever get a huge inheritance or hit the lotto, I will go on tour and want to meet a bunch of you.

Seattle sounds good to me! That's only 5 hours from my home town where I grew up so I could even visit some family before the convention. I think we have a possible winner! Lets make it happen @sasNW

Oh damn! I spoke with PM to get a recycler hydratube, but if the M****s company is who I think it is (of the m****x perc variety ), I was initially going to see if that could be done as well! I'm super pumped to see what you and Trey have cooking up now.

Thanks for confirming what I was thinking @pootsforjesus. Can't wait to see your recycler hydratube and your possible M****s hydratube

So many hydratubes! Makes me want to buy an EVO just so I can join the HT group

Damn it...too many hints!!! Nah I'm just playin'... @BoogerMan has been so forthcoming in what he asks for in designing the pieces he gets that I wanted to share...and ya, being secretive was to just get the juices flowing, hehe. Besides, I wanted to kinda hint at what the basic design is so you guys don't think Trey can only make recyclers...he can do much more based on the discussions PM and I have had. I think we are going to see something really special when this particular project is done....might be a little while guys before we see it, and that's cool cuz I want him, PM, and Mrs PM to take their time in the artistic side of the design.

Yeah I'm a little forthcoming. Here comes some new info from me once again. No secrets here haha.

Changing from the triple incycler that Earl Jr makes to a triple klein that Gordo Scientific makes. It will have around 6 uptake tubes and 3 return tubes. Here is a video of one made by Gordo Scientific where I got the idea. Since Trey is the klein master I figured this triple klein instead of the triple incycler would turn out better and be more up his alley since he makes kleins all day!

Convention sounds amazing! We could all wear name tags with our forum name. It would be amazing to see everyone from young to old and of every race all together to celebrate our love of vaping and amazing friendship that we have found with this community.
Let's not just talk about it, let's make it happen

Lets definitely make it happen! Lets try to get some up and coming glass blowers there like Trey and Mike. That would be so awesome to meet them and see them work in person!!

Getting another piece made, a recycler just like CrazyDiamond's. I went to all 4 major headshops in my town today, and of the 5 total recyclers I saw, all of them were at least $300, up to $600, for basic, though sometimes brand name, glass....I think I'll drop a couple hundred less for a semi-worked and probably equally if not better functioning glass.

Thanks Trey and PM, can't wait to get my new pieces!

Isn't that ridiculous! Same in my area and I live in a decent size city.

I can't believe how affordable a recycler or HT or klein is from some of these new glass blowers here on FC. I am so thankful to be getting these pieces made for such a good price. I never thought I would own some of these style rigs/bubblers because of the crazy markup price from brand name and local smoke shops.

 

[PoopMachine]

Its the headshop mark up. Trey sells a REALLY tiny little recycler to a local shop for $65.00. They sell it for $150.00.

 

[BoogerMan]

Its the headshop mark up. Trey sells a REALLY tiny little recycler to a local shop for $65.00. They sell it for $150.00.

That's absurd! I'm so glad I figured that out a long time ago. Ordering online or straight from a glass blower is the way to go these days.

Unless you are super inpatient and have to have it right then. I would rather personally wait a few days compared to paying a $100 markup but that's just me haha.

 

[BoogerMan]

Ugh double post. My phone internet is lagging like crazy for some reason.

Mods please delete this! Thanks!

 

[Deadhead101]

One headshop I visited didn't have any recyclers and the guy behind the glass told me that whenever they get a couple in, they sell almost immediately, to which I replied, "Maybe you should order a few more, or maybe even a whole bunch"

 

[BoogerMan]

One headshop I visited didn't have any recyclers and the guy behind the glass told me that whenever they get a couple in, they sell almost immediately, to which I replied, "Maybe you should order a few more, or maybe even a whole bunch"

Hahahahaha lmao You're a genius!

Some people (not all) who work/own a smoke shop aren't the sharpest tool in the shed... Maybe they will figure it out one day.... Or maybe not

 

[PoopMachine]

Mrs PoopMachine suggested we try to coordinate a FC Meetup at next years Seattle Cannabis Cup.

 

[BoogerMan]

Mrs PoopMachine suggested we try to coordinate a FC Meetup at next years Seattle Cannabis Cup.

The Seattle Cannabis Cup is September 6-7th this year.

Anyone have any idea if it will be the same dates next year?

I'm guessing it will be September 5-6th next year so it stays on a Saturday Sunday schedule.

I'm in!

 

[blankrider]

Someone who really cares and wants to make the convention a reality please start a dedicated thread so we can get everything planned and inform everyone who is not involved in this thread

I just took a hundred dollars and set it aside for the convention and plan to do so every month or so just to make sure I can make it.

It will be like a family reunion for our FC family

 

[sasNW]

hmmmm we should get @sasNW to host...he's said free samples to all FC'rs...he's in Seattle, recovering from a very tragic event caused by his negligent "friend". Opposite side of the country than me but so what...I'll fly if it could happen.
Or maybe there's someone from Colorado...only time will tell.
But, I know I've already stated that if I ever get a huge inheritance or hit the lotto, I will go on tour and want to meet a bunch of you.

I'm in, but Doubt I could host it.... But I could certainly provide lots of samples! Very stupid buddy killed my plants while I was gone, but it's going to be turned into loooots of oil. So not a complete loss, I could sure a shit host the dab bar

 

[PoopMachine]

We're actually going to plan for the Cannabis Cup next year as a vacation for us. Its close to our wedding anniversary so its a perfect way to celebrate so a FC meetup at the same time makes perfect sense and gives plenty of time to plan it.

 

[DieHard]

Planning a year in advance, I'll be there!

 

[PoopMachine]

@Cannabis Connoisseur , I should have your piece today for shipping tomorrow. He's going the name you requested in Amber Purple.. thats a really nice looking glass that changes colors depending on how the light hits it.

 

[Cannabis Connoisseur]

@Cannabis Connoisseur , I should have your piece today for shipping tomorrow. He's going the name you requested in Amber Purple.. thats a really nice looking glass that changes colors depending on how the light hits it.

That's awesome bro, I can't wait to see it!!!