Does anyone build this vape already? DIY cheap coil vape.

[average_joe]

Hello I am not sure of there is a DIY thread in the forum and could not find one.

My question is, is this vape made already by someone? I took ideas from the GSV and Elev8r:

https://imgur.com/a/JbenThf

It is a 14 female to 18 female adapter with quartz beads that stay in place because theres a mesh on top and in the middle. I made the gaps in the coil and to put it around the adapter I had to open the coil and then close it for it to lock in place (after the photo I closed it even more and stays perfect in place). Thats it.

 

[Hippie]

Yes - there have been a few similar builds
Theres some pics and videos of some of them in this thread (at the bottom of this page) here ...

510, 420 … „330MV“ / DIY 510-Mod-Vape

Not much room with the triple posts on this one. Had more success with the other Fishbone clones. But yes, should work. Beware that with all these glass tops there's a lot of variation / tolerances and I recommend you to buy many of them to find one with a good fit. Sometimes they don't press...

fuckcombustion.com

 

[average_joe]

Yes - there have been a few similar builds
Theres some pics and videos of some of them in this thread (at the bottom of this page) here ...

510, 420 … „330MV“ / DIY 510-Mod-Vape

Not much room with the triple posts on this one. Had more success with the other Fishbone clones. But yes, should work. Beware that with all these glass tops there's a lot of variation / tolerances and I recommend you to buy many of them to find one with a good fit. Sometimes they don't press...

fuckcombustion.com

Thanks so much! I had no idea the name was 510 and was looking for "do it yourself" as diy did not show any results.

Will check it out and if no one posted one thats the same Iwill post mine there and close this thread otherwise just close this one anyway.

Thanks again!

 

[invertedisdead]

https://fuckcombustion.com/threads/broke-ballin’.52345/

 

[Hippie]

No - You've not made a 510 vape (510 relates to the screw threaded socket on an ecig battery)

I think you could call it an all glass DiY flowerpot, or a maybe a DiY DC Elev8R or another DiY enail coil and ball vape (you should be able to find a few similar things if you search the DiY section for enail and balls)

 

[badbee]

Look up the "Pinky", it's a very similar home build that has become popular recently. Functionally it's not much different, I expect the Pinky has more mass and heat retention.

Edit: here's the link https://fuckcombustion.com/threads/...-style-thermal-extraction-device.52169/unread

 

[average_joe]

https://fuckcombustion.com/threads/broke-ballin’.52345/

Can you turn that one up without the glass falling?

 

[average_joe]

Look up the "Pinky", it's a very similar home build that has become popular recently. Functionally it's not much different, I expect the Pinky has more mass and heat retention.

Edit: here's the link https://fuckcombustion.com/threads/...-style-thermal-extraction-device.52169/unread

Thanks I havent seen that build before. Just gave it a look and can't find the info of the bowl, is it the same used for the gsv with that 24/29 glass? Noticed lot of ppl getting weird bowls to make it work and that was one of my issues with the GSV and made me build my own that supports a more average used glass adapter.

 

[invertedisdead]

Can you turn that one up without the glass falling?

Yes, as the coil slips on from the bottom and can only come out one way.

 

[badbee]

Thanks I havent seen that build before. Just gave it a look and can't find the info of the bowl, is it the same used for the gsv with that 24/29 glass? Noticed lot of ppl getting weird bowls to make it work and that was one of my issues with the GSV and made me build my own that supports a more average used glass adapter.

I've seen a variety of bowls used, it will be in the thread.