Divine Tribe atty's

shantytown007

shantytown007

Well-Known Member
divinetribe said:
The Pancakes will work best but i will now just be selling the donuts and some other coils for people to play with and try to clean. I will have these dual 1.5ohm donut RBAs at the end of next week ,, you will need the ROBOX or similar mod that does sub ohm. It comes out to .6ohm I will also be making a triple donut rba and many others this month along with youtube videos of my friend's and i taking some of the biggest, cleanest dabs out of any vaporizer pen anyone has seen. Next week we will also show you in video how to rebuild your ceramic rod glass globe coil and turn it into a 1.ohm kanthal wire monster with a deep bowl to hold large dabs. I took a hit off one this week that my friend modified and built and i was shocked.
IMG_4073.JPG
Click to expand...

Haha, that looks like a budder wombat on those donuts. I love this vapor science. You should offer a monthly subscription with beta atomizers, like a 'wine of the month club'
 
divinetribe

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
hi all pull out your glass globes they are coming back , see this proto, the finished product in jan will have a ceramic housing instead of a metal housing that you see in the video also check this build, i want the same thing but instead of the metal i want it to be ceramic threaded cups
 
Last edited:
D

DropGlobsNotBombs

Member
Loving the work @divinetribe


Has anyone thought of a way to implement the pens with these?

http://www.dhgate.com/product/honeystraw-concentrate-honey-dab-straw-nectar/211706662.html#s1-3-1|3296042584
----
http://www.dhgate.com/product/pinna...pe-vaporblunt/184494946.html#cart_view-6-null

I love the idea of having a spill proof setup like this, but I refuse to purchase a nibbler or such. Way too much. One piece spill proof pen would be freaking sweet.

On another note

I love @Nube Scrutator setup with the Persei bubbler, but I've already but a couple bubblers and was wondering if anyone knew of a 'safe' silicone tubing alternative that could attach to my Robox mod + glass joints?
 
mixchu69

mixchu69

Well-Known Member
Hello divinetribe,

How much concentrate should I be using for your ceramic donut atomizer? At 4.2, how long should I hold down the button to get some clouds? Thanks.
 
shantytown007

shantytown007

Well-Known Member
Be careful not to overload the chamber on the donut- I filled it to the top of the ceramic section a few days ago, and now I have a tar pit going on in the bottom sealed part of the atomizer :) Not that big of a deal, it unclogs quickly and I can get massive hits once it gets hot and I'm holding the vape upside down. The Robox battery is a beast.
 
D

DropGlobsNotBombs

Member
Does anyone know what sizes of 'food grade silicon tubing' to order to attach a ceramic donut to a 14mm water pipe? Any input greatly appreciated

Also, I know not the correct place, but i'm such a noob, I need tuition money and am trying to sell my LSV and everything else I don't use , can someone point me to the forums do to so, at least for the LSV? I've seen it done before. Please don't bash and thank you guys :)
 
DropGlobsNotBombs,
  • Like
Reactions: divinetribe
Nube Scrutator

Nube Scrutator

Cloud Searcher...
K

kushinjikun

New Member
been using the smooth ceramic rods for a minute, a definitely will be buying more. Clouds AND taste, keep up the good work Matt. Shout out too for sending the replacements and so quickly, really great customer service. Now to look into an Robox....
 
fernand

fernand

Well-Known Member
FWIW, I just started going through this thread, and I'm struck by the aggressive tone some people take, as if it were a given that vendors are mainly out to cheat, poison and pollute us.

IMHO our vendors are users just like us, digging around for effective and safe technologies. Not always with perfect results, not always fully informed. We're all just trying to figure it out. It must take a lot of patience to work with a clientele that's (understandably?) a bit paranoid. Thanks, Mr. Tribe.
 
mixchu69

mixchu69

Well-Known Member
fernand said:
FWIW, I just started going through this thread, and I'm struck by the aggressive tone some people take, as if it were a given that vendors are mainly out to cheat, poison and pollute us.

IMHO our vendors are users just like us, digging around for effective and safe technologies. Not always with perfect results, not always fully informed. We're all just trying to figure it out. It must take a lot of patience to work with a clientele that's (understandably?) a bit paranoid. Thanks, Mr. Tribe.
Click to expand...
Yea, it seems like a lot of grilling but in the end, it will make your product better. It's great to have the FC support (I know a few friends who use FC to be their guide to purchase). I wish I knew about this site sooner, then I wouldn't have wasted so much money on crap. I think you did a great job!!!
 
DJ Colonel Corn

DJ Colonel Corn

The Vapor Ninja
OK so I just returned to Divine Tribe's site, as I am now the proud owner of a sub-ohm mod.
My suspicions were correct, the ceramic coils sold such as the dual ceramic rod, comes out to varying 0.6-1.0 ohms, no wonder they wouldn't work with my last mod !
Strange they are labelled at 1.7 ohms, as this is NOT the case.
VERY happy with my purchase, so happy to get away from wicks ! The ceramic rod is great.

So, I also got the ceramic donut 510 atty featured on the site.
First of all, as a tip, put your wax on the end of your tool and heat it with a lighter so the wax melts off the tool and into the donut.

I got some fairly satisfying hits, but found the device gets extremely hot quite fast.
Also, it's advertised as having a 'sweet spot' at 9 watts, but I find I need about 12-15 watts to get the same cloud my generic globe would give.

The extreme heat buildup worries me. Also concerned it wouldn't screw apart, but after heating I was able to.

I'm completely behind Divine Tribe ! Nice job on the coils, guy. Good wire and solid ceramic. Interestingly the ceramic rods are hollow, never saw that before.

SO all in all folks, a great site, but BE AWARE that even the 1.7 ohm coils advertised WILL NEED a SUB-OHM MOD. I've noticed almost everything on the site is for sub-ohm with the coils being no exception. Just don't want to see someone try them, fail, and blame the company.

Noticed you moved to Arcata, cool.

Oh and ALSO: Shipping was LIGHTNING fast, unbelievable !!

Happy Vaping, y'all.
 
707vallejo707

707vallejo707

NorCalLeftSideWe$tSide
I've been getting stuff from Matt for almost a year straight. He always keeps it honest and truly gives the best customer service. It's great to see him finally getting light in the FC community.

I've tried a lot of his atomizers so far the donut has remained my favorite. Thanks for being such a great resource/supplier looking forward to new things always!
 
PPN

PPN

Volute of Vapor
Hi, how can I clean my Donut atty? it's pretty clogged now and I can't hit it until it is warm.....I think there is a bit of oil in the air intakes....what about to soak it completly in iso....but I'm afraid it don't helps at all.....

I'm testing a new sub-ohm big battery (still not avalaible) able to push the juice until 8V and 30W, it seems to be a killer and I already tested all my gear even my sr-74 with great success....but there is still some little issues too

edit: Any news about the imroved version of the Donut....?
 
Vapenic

Vapenic

Gaseouser
Enchantre said:
the off-gassing from nichrome
Click to expand...
As far as I understand Wikipedia descriptions, NiCr does NOT do outgassing, it is oxidizing on a very high temp, (until NiCr is in contact with O2, so no more chromium oxide forms once the entire surface of NiCr -or Kanthal- is covered with this protective, non-corrosive layer) and common concern is exactly the very fine dusting, not outgassing (difference is the state of the matter), which may occur under strong vacuum (inhalation). Although this would be incomparably less through a lifetime, than for example CrO dust produced by a hairdryer during one use, or as a result of thermal expansion stress in a cooker's or a heater's heating element. I also understand the strength of the chemical bond between NiCr and its oxide (strong, to put it gently). There are safety level measurements in place for household thresholds, also, trust your body and understand, that a single CrO molecule won't cause genetic degeneration right upon contact with a body cell.
 
Last edited by a moderator:
divinetribe

divinetribe

We are trying our hardest to become Medical Grade
Manufacturer
NoSvOrAx said:
Hey Matt,

Does the USB VV Sub Ohm Passthrough on your site fire the donut and dual rods?
Click to expand...
only with really strong usb power supplies they have to be 11w supplies, it works on ipad chargers for instance their are many high output charger on ebay , i should start to stock those and make a kit.
PPN said:
Hi, how can I clean my Donut atty? it's pretty clogged now and I can't hit it until it is warm.....I think there is a bit of oil in the air intakes....what about to soak it completly in iso....but I'm afraid it don't helps at all.....

I'm testing a new sub-ohm big battery (still not avalaible) able to push the juice until 8V and 30W, it seems to be a killer and I already tested all my gear even my sr-74 with great success....but there is still some little issues too

edit: Any news about the imroved version of the Donut....?
Click to expand...
heating your piece up and allowing as much stuff to drip out as possible then soaking it in iso is the best way version 2 got sent back and should be out feb 1st i did not like a bunch of stuff on it. this production and development stuff just takes way too long. but i am grinding away and striving for bigger cleaner hits..
 
You must log in or register to reply here.
Top Bottom