DDave Mod, New DDave Mini Mod & Kit for Arizer EQ/VTower Vapes

[DDave]

Sup FC?

Due to feedback relating to frozen ground glass joints, have decided to include BeesWax Beads with mod kits now.

This blurb added to kit instructions and listings on www.DDaveMods.com. (BeesWax also available separately under the Accessories section).

**** Now includes 5 BeesWax Beads (at no additional cost).
BeesWax - Your No-Stick Glass Solution: Use optional. There have been some who have reported their ground glass getting stuck together. Regardless of reason, beeswax can help and Ddave loves to help! So, included in your kit at no extra charge will be 5 Free BeesWax Beads. To use them, rub gently on your “male” ground glass joints. You don't need much as a protective layer to help prevent glass-lock. (If you find it difficult to apply, slightly heat the male glass joint before applying).


Quantities:
5 x Beads included with Kits at no additional charge
10 x Beads if purchased separately from Accessories section.

 

[Anna Thetical]

I've been meaning to stop by and thank DDave for "modding" his mods, with the newer glass that holds the desired heat longer, for more extended sessions...but have been too immolated (in the best sense) to remember to do so. As I'm waiting for the EQ to heat up, I thought I should rectify that, and to wish him and the rest of FC happy holidaze!

So...

Happy holidaze, FC and DDave!

 

[DDave]

Announcing biggest DDave Sale Evar! That's right "EVAR!"

Anyhow, 12/31/16 - 1/1/17 = 25% off Everything!!!!

There's a catch, however! Isn't there always?

You have to be sober enough to see the Web Site!!!!

Coupon Code = DDaveHappyNewYear2017

 

[XiolaOne]

Anything you recommend for a FW4?

 

[DDave]

Anything you recommend for a FW4?

Some have replied they use this on their FW4....

http://www.ddavemods.com/store/p12/14mm_Vaporizer_Wand___3_Basket_Screens.html

 

[Vape Donkey 650]

Sup FC?

Due to feedback relating to frozen ground glass joints, have decided to include BeesWax Beads with mod kits now.

This blurb added to kit instructions and listings on www.DDaveMods.com. (BeesWax also available separately under the Accessories section).

**** Now includes 5 BeesWax Beads (at no additional cost).
BeesWax - Your No-Stick Glass Solution: Use optional. There have been some who have reported their ground glass getting stuck together. Regardless of reason, beeswax can help and Ddave loves to help! So, included in your kit at no extra charge will be 5 Free BeesWax Beads. To use them, rub gently on your “male” ground glass joints. You don't need much as a protective layer to help prevent glass-lock. (If you find it difficult to apply, slightly heat the male glass joint before applying).


Quantities:
5 x Beads included with Kits at no additional charge
10 x Beads if purchased separately from Accessories section.

Hey Dave, way to look out for your customers with the new items! Lucky for me, I haven't had any frozen glass joints, but I have been close, having them get "stuck" occassionally, but I manage to get them "un-stuck"

I did get an original arizer eq cyclone bowl stuck with a glass elbow in it one time, and I couldn't un-freeze it no matter what I did. Anyways, a couple of questions about the beeswax:

• How long does the wax stay on your joints, after cleaning? I like to clean my angled elbow adapters with some frequency so it doesn't get too musty and crumbed up. Does soaking a glass joint in alcohol dissolve the beeswax off?
• How many 14 or 18mm glass joints can you wax up with a single bead of wax?
• Is the beeswax emissive in our vapor path? Does it off-gass itself, since the glass joints it's touching can become hot? Or does it not do that because our vapor paths, glass joints, should be air-tight? Or does it just not emit also?

But anyways, I'm gonna hop on the new website and grab a few packs, since they're cheap, and I can hop in on the sale, last minute.

Also, David! I didn't see you promoting your new "dry flavor savor" whip attachments. Did I miss it, posted somewhere else, or is it brand new, or are you just being modest?

These look pretty cool, (literally) I do favor wet hits, but I must concede there is some flavor to be lost. Since these have standard 14 & 18mm joints, they will also work with the new matching sized glass adapters for my DT v3.0 ceramic donut attys (my favorite ) so I think I'll try a couple of these glass atty's out too!

Thanks Dave, and a happy, kushy new year to all

 

[Pagliachi]

Hey
Now I have the 18mm adapter mod on my vtower.
Been useing it for a bit.
I have noticed that I am useing more herb than I'm used to.
But, in context, I was useing a arizer solo before.
In your opinion, Is the 14mm mod a little more efficient than the 18??
If so I'm gonna order the 14 mm kit.
Thanks!!

 

[kellya86]

Hey
Now I have the 18mm adapter mod on my vtower.
Been useing it for a bit.
I have noticed that I am useing more herb than I'm used to.
But, in context, I was useing a arizer solo before.
In your opinion, Is the 14mm mod a little more efficient than the 18??
If so I'm gonna order the 14 mm kit.
Thanks!!

The 14 doesn't hit as hard as the 18 in my opinion, and that leads to more goes...

I find that with the 18mm, if you only fill it a third, instead of full, it works just as well, and saves you 2 thirds of herb.....

 

[DDave]

Hey
Now I have the 18mm adapter mod on my vtower.
Been useing it for a bit.
I have noticed that I am useing more herb than I'm used to.
But, in context, I was useing a arizer solo before.
In your opinion, Is the 14mm mod a little more efficient than the 18??
If so I'm gonna order the 14 mm kit.
Thanks!!

Depends on your tolerance. If you're coming from a Solo stem, the 14mm setup accommodates a similar sized load. Due to micro-dosing, this is the setup I use on the EQ.

It's about 2 more weeks before next expected EQ mod release. There will be both 14mm and 18mm pieces to the new mod. Stay tuned!

 

[DDave]

(Mod Note: Please forgive the back to back post. Completely different subject than post above and did not want this post to get lost.)

Quick Announcement relating to Whip Tubing!

To better accommodate the varied preferences that exist amongst Whip Vape Aficionados, I've secured a 2nd type of whip tubing which is thicker walled and more rigid than the original tubing in the mod kits. Same Internal Diameter as original tubing, so still works with all the kit pieces.

All EQ Mod Kits will now include 2.5' of each. For the individually sized kits (18mm Only or 14mm Only), it means you get 2.5' additional whip tubing at no increase in cost.
It's all about choices.... and here's another!

Vape On FC!
Almost time to announce V3!
Same powerful performance, but boost in flavor!
That even the most discerning Vaper will savor!

 

[Joe Dirt]

Well I'm going to do my best to write a post now. I just finish my first arizer E3 session and I jumped right in the deep end with the DDave mod. I have been reading through the 2 threads and all the hype is true. I'm am a chronic smoker and I feel like a had a serious dab session and I only smoked half a gram to a gram. I can't believe how efficient and effective this setup is. Why did it take me so long to find you guys! I have been a bong smoker my whole life. I never got got as high off joints, pipes, vapourizers of the past. This is my new go to (and now I need to find a good portable) way of smoking. Not to mention this is SO much smoother, less destructive on my lungs. After all the years of literally inhaling smoke, my lungs will be so much happier. This I feel is the least harmful way of "smoking"/vaping my herb.

I ordered both the arizer and the mod kit last Friday, from seperate locations. I bought the arizer here in Canada and the mod kit from DDave in the States. I only expected to receive my mod kit after I recieved my arizer thanks to custom boarder officials having to approve my package. However DDave mailed my kit the next day, a Saturday.So low and be hold upon returning home from work today on my door step was my arizer, but my beautiful mod kit was sitting right beside it as well. I had excitingly read through DDave website and I remembered to specify which whip I wanted but I forgot to mention to send the free long cyclone bowl. However after reading through this thread, in true DDave fashion it was included in my kit. Thanks DDAVE for the amazing product and the amazing service. I appreciate all your hard work.

I set my arizer up to my bong but it is too large for this setup. My buddy gave me a dab rig a few years back so I hooked it up to that and it works really well. Perfect for now but when funds are right I will get a little water piece. I was reading you guys use the D020d. I'm doing power hits at 200, at fan speed 2 and I am getting crazy clouds. Not sure how to attach a picture or else I would show my setup. Says to select url, not quite sure. I'll try to figure it out.

 

[DDave]

Hey Joe Dirt,

It's awesome that even with USPS and Customs, the kit made it to you so quickly! I hate waiting for items I ordered, so always try to get an order shipped asap.

Glad to hear you're liking the kit! If you have questions or want to discuss techniques, you're in the right place! Awesome group of people and pool of knowledge on FC.

To post a picture, get an account on IMGUR.com
Upload your pictures there.
Then, once uploaded, IMGUR will provide you a direct download link. This is the URL that the imaging routine on FC is requesting.

I'm gonna open up a can of worms here, but for a portable may I suggest a Milaana?
http://fuckcombustion.com/threads/the-rbt-milaana-unregulated-single-18650.18829/

Enjoy!
DDave

 

[kellya86]

I'm gonna open up a can of worms here, but for a portable may I suggest a Milaana?
http://fuckcombustion.com/threads/the-rbt-milaana-unregulated-single-18650.18829/

Enjoy!
DDave

Arizer are about to release a new portable....

 

[Joe Dirt]

No idea how to use imgur. Here's my setup. I've gone back to my large bong instead of my little bubbler. There's no way to clear the chamber on it. I really want to ordered the D020d now. https://imgur.com/a/fT6TG

Now I am a complete noob to the vap scene and only have done a dozen sessions however I have found 2 small hacks. Not saying I'm inventing anything, I'm sure someone else is doing this somewhere. Firstly my wand had become frozen in my cyclone bowl. I had applied extra beeswax when I first got it. I had to take it with both hands, twist and pull at the same time and I was worried I was going to break it. It did come apart with some force. Clearly I had residue and even a little brown burnt marks. So I took a paper towel with just a little isoproypal alcohol and wiped down the connections both male and female ends. The connections are now silky smooth. So as long as every half dozen sessions I just give the connections a quick wipe down I have no problems. Secondly for cleaning my basket screen. I love this setup and I need it running in top form so my OCD kicks in. When cleaning out the used material of the basket screen, I pick it out with my vap tool but there is always a little bit at the bottom I got to scrape really well to remove and it is still difficult to get it all. So the other night I am at my work bench vaping, all my RC gear right is hand and I am cleaning a bowl, "there has got to be a better way". So I grabbed an unused paint brush sitting right in front of me and I found it perfect for cleaning the last bit out of the basket screen. So yeah there's my 2 hacks, clean your connections with iso regularly and clean you basket screens with a small paint brush. https://imgur.com/zcoN2GN

 

[kellya86]

really want to ordered the D020d now.

I bought the d020d for my eq....
I never really got on with it, so used my eq dry... I used it with my solo mostly.......
Occasionally with the vapcap now...

But once I got an evo, I tried the hydratube on top of the eq..... and it works very well...
Almost (embarrassingly) as good as the evo.....
Shhhhh....

Anyway if your gonna buy a $30 piece from dhgate, I would suggest looking at the ht's.....

 

[Joe Dirt]

I bought the d020d for my eq....
I never really got on with it, so used my eq dry... I used it with my solo mostly.......
Occasionally with the vapcap now...

But once I got an evo, I tried the hydratube on top of the eq..... and it works very well...
Almost (embarrassingly) as good as the evo.....
Shhhhh....

Anyway if your gonna buy a $30 piece from dhgate, I would suggest looking at the ht's.....

Thank you for the suggestion. Again I am all new to this and I have a lot to learn. I will look into these hydratubes. You clearly have been doing this for a while, I value your imput. Thanks again

 

[kellya86]

Thank you for the suggestion. Again I am all new to this and I have a lot to learn. I will look into these hydratubes. You clearly have been doing this for a while, I value your imput. Thanks again

I forgot to mention that I was using my @DDave adapter and screens for this...
The cyclone is obsolete forever....

When is this new mod coming DDave ????

 

[DDave]

I forgot to mention that I was using my
When is this new mod coming DDave ????

2-4 weeks. Shooting for soonest possible release date... just waiting on one more batch of pieces!

I hate waiting!!!! & & &

I know I share that with most!

 

[Joe Dirt]

Sorry I've read through this thread and and I don't recall seeing anywhere mentioned what the large flat screens are for? I could mange the smaller screen in the cyclone bowl but what are the larger flat screens for? Also I buckled and bought a new draw piece. I narrowed it down to 2 but went with a "diffusion pump" bong. http://m.dhgate.com/product/2015-new-glass-smoking-bongs-based-water/216674730.html#pd-019

Here's it in action
https://www.youtube.com/shared?ci=mtnPJCmHvIs

FC thread http://fuckcombustion.com/threads/batesxworm-diffusion-pump-bubbler.7048/

 

[DDave]

Sorry I've read through this thread and and I don't recall seeing anywhere mentioned what the large flat screens are for?

Screens were recently resized to be a bit smaller than the center glass ring of the adapters to make cleaning the adapters without removing the screens possible.

Some liked the previous fit of the screens touching all sides of the ring of the adapters, so I include both sizes with the kits.

You can use either. Neither will impact performance.

 

[Tranquility]

2-4 weeks. Shooting for soonest possible release date... just waiting on one more batch of pieces!

I hate waiting!!!! & & &

I know I share that with most!

YOU hate waiting?

 

[DDave]

YOU hate waiting?

YOU dont?

 

[Tranquility]

YOU dont?

I'm generally pretty good at it.

However, I just got the EQ on sale and am waiting for V3 to "Release the Beast". I have gone almost completely to concentrates as the portable herb vapes have not made me happy as yet. I'm trying the elbow pack while waiting. It is good, but not a beast.

So, I guess my comment was not on people in general but on the potential difference between the difficulty of our waits.

 

[DDave]

Random Coupon Code Alert!

One coupon available, 10% Off! Good till 1/24.

Coupon Code = I_Got_It_First!

A New Year's Gift to one lucky quick clicker!

 

[little maggie]

I'm waiting for the eq mod update. But I'd like to know the best way to microdose- either with the current mods or the new one.