Wesleypipes
Active Member
No I haven't. Everything seems the same. I have been using mainly on the half bowl setting
Dani Fusion by Battery-free Ganz
- Thread starter batteryfreeganz
- Start date
Dr. Lucien Sanchez
Active Member
New bowl
oddjobold
Vape swap shop
New bowl
I really can't get exited about this.
The difference in size seems minute...negligible
Sour Dream
Blue Dream enthusiast
Me either
Dr. Lucien Sanchez
Active Member
The increase is noticable but not a huge difference, I kind of hope this becomes the new standard. Honestly I like the product. The fusion has been a nice smooth experience for me and I appreciate BFG trying to switch it up. I think the big limiting factor is the cap has no extra room, the chamber can't get any bigger without changing the whole assembly. It took dyna over 6 years to respond and increase the capacity by the same marginal difference. I appreciate BFG trying to make small upgrades and changes. Positive vibes guys
2pumpchump
Well-Known Member
Not sure witch tread to post this great deal so it going in both
wesleypipesandmore.com
- Wesley pipes and more the USA home of BFG'S Dani and fusion
Stunner, wpa, glass stem, fusion, tswooden coolstem, mouthpiece, and leather wrap
wesleypipesandmore.com
Wesleypipes
Active Member
Today only. Happy frieday the 13th!!!Not sure witch tread to post this great deal so it going in both
- Wesley pipes and more the USA home of BFG'S Dani and fusion
Stunner, wpa, glass stem, fusion, tswooden coolstem, mouthpiece, and leather wrap
AlectoTheFirst
New Member
did someone test the Fusion with a YLLVAPE IH 2.0 by any chance? I think the Anvil fits but i cant find anything about the Fusions dimensions.
TedJones
Well-Known Member
Don’t have that IH or anvil to compare. My cap is 14mm diameter and the flange it sits on is a bit over 15 if that helps.
Raphael De La Ghetto
Well-Known Member
XL cap needed to be .20 for me to purchase. Will await the inevitable XXL.
Perfect_Speed4069
I am the beetle in a box that only you can see
You can have my Castle beta if you like. Message me. I'm in UK btw
Gnome34
Well-Known Member
Just placed an order for the "Halloween" fusion deal.
Pretty excited, mainly purchased this to temper my VAS until the Tempest comes out.
Any tips you wish you would've known going in?
I'm fairly experienced with torch vapes, the heating process should be pretty straightforward for me I believe.
A little concerned about how well I'll get on with the leather strap, probably give it some trial runs cold first
.
Assuming I should disassemble and clean everything before use. Everything in iso but the wooden stem and acrylic mouthpiece should do the trick.
Pretty excited, mainly purchased this to temper my VAS until the Tempest comes out.
Any tips you wish you would've known going in?
I'm fairly experienced with torch vapes, the heating process should be pretty straightforward for me I believe.
A little concerned about how well I'll get on with the leather strap, probably give it some trial runs cold first
. Assuming I should disassemble and clean everything before use. Everything in iso but the wooden stem and acrylic mouthpiece should do the trick.
TedJones
Well-Known Member
Sweet! Those new mouthpieces look niceJust placed an order for the "Halloween" fusion deal.
Pretty excited, mainly purchased this to temper my VAS until the Tempest comes out.
Any tips you wish you would've known going in?
I'm fairly experienced with torch vapes, the heating process should be pretty straightforward for me I believe.
A little concerned about how well I'll get on with the leather strap, probably give it some trial runs cold first
Assuming I should disassemble and clean everything before use. Everything in iso but the wooden stem and acrylic mouthpiece should do the trick.
Yea, quick iso swab & rinse is all that’s needed. For deep cleaning, pipe cleaners work well for the smaller bore & cotton swab for rest.Takes a lot more heat than Dyna.
Go for a “strong”, loud click. If that doesn’t happen, go longer past it than your normal.
Keeping the flame at the same distance to the cap throughout the entire heat cycle helps imo .. steady hand!
Gnome34
Well-Known Member
The Fusion Halloween bundle arrived today, quick shipping! Cleaned everything and found some crud but nothing I would've been concerned about consuming, pretty clean compared to some others.
Threading is good but not perfect, aside from that the machining and stem look fantastic. I'm impressed!
Used through a bong for the first few sessions and started dialing in torch and airflow settings. I think I'm close to perfecting it for my preference but not quite there yet. Had fun learning.
Decided to try it natively about an hour ago. Holy cow! Really enjoying it this way.
Great value for the dollar, fairly simple to figure out even without instructions included.
Threading is good but not perfect, aside from that the machining and stem look fantastic. I'm impressed!
Used through a bong for the first few sessions and started dialing in torch and airflow settings. I think I'm close to perfecting it for my preference but not quite there yet. Had fun learning
. Decided to try it natively about an hour ago. Holy cow! Really enjoying it this way.
Great value for the dollar, fairly simple to figure out even without instructions included.
VapingYogi
Pranayama; of a sort.
Was this the bundle with the Fusion and the Stunner? if so how do they compare or which are you using more? just curious.
Gnome34
Well-Known Member
Negative, just the short carbless stem, acrylic mouthpiece and the fusion. Debated on grabbing the stunner but I'm holding off for the tempest.
VapingYogi
Pranayama; of a sort.
ah cool, thanks mate, I'm currently all in waiting for the Tempest too, but the Dani / Stunner were things I was looking at just before had so - curious.
Gnome34
Well-Known Member
I was advised to try the Fusion with a different heating method:
Screw the cap down but leave about a fingernail thick gap. Aim the torch at that gap for roughly half of the heating time. Aim the torch kind of up at the air intake holes while slowly rotating for the rest of the heating time plus 5-8 seconds after click.
Massive clouds through the bong with one hole halfway closed.
Was positive I had combusted both times with not a bit of combustion.
I'm a happy camper!
Screw the cap down but leave about a fingernail thick gap. Aim the torch at that gap for roughly half of the heating time. Aim the torch kind of up at the air intake holes while slowly rotating for the rest of the heating time plus 5-8 seconds after click.
Massive clouds through the bong with one hole halfway closed.
Was positive I had combusted both times with not a bit of combustion.
I'm a happy camper!
TedJones
Well-Known Member
Just received this terp pill stem compliments of @Highartisan. What a beauty (& beast)! A lot thicker than I expected. Ran back to back bowls and it pulls real nice. Cooling is about the same as the short woody which is nice and familiar. The draw is quite a bit more open though with the large bore all the way through the dimpled mouthpiece/end. 2nd bowl was rockin as I got 3 or 4 (cant member, ha) big pulls/clouds outta that lil bowl that I'd normally be coughing up a lung with the stock. Much more tolerable this round 
https://highartisan.com/
https://highartisan.com/
