Don't forget to support FC and visit EDIT through our link if you're going shopping.
/spam
Post up some pics in the glass thread, too!
/spam
Post up some pics in the glass thread, too!
Bong Question (EHLE, et al.) & more
- Thread starter HiC
- Start date
Chubba
Vaporbonger
I meant an ashcatcher (precooler), indeed, it would be overkill for vapor.
The carbon adaptors look interesting, there hasn't been enough research done to convince me.
Going to have a new Roor.de in a week to test out
Got an idea of PD + Roor in my head with SSV tubing (very short length, 1/2 foot) + VB's ground glass attachment.
Going to be SICK, extremely effecient PD vaporbonging without the sillyness of upside down PD's
The carbon adaptors look interesting, there hasn't been enough research done to convince me.
Going to have a new Roor.de in a week to test out
Got an idea of PD + Roor in my head with SSV tubing (very short length, 1/2 foot) + VB's ground glass attachment.
Going to be SICK, extremely effecient PD vaporbonging without the sillyness of upside down PD's
graywulf
Well-Known Member
With how clean those little porous rocks keep my bong vs. a normal water ashcatcher I'd say they're really efficient. Hits seems smoother. Plus I think a clean one (I have the RooR one) is a nice addition to any glass setup. Activated carbon has been used as a filtering agent for a while. Be it air, water, or industrial processes.Chubba said:
Nasty particulate matter has a (-) charge while carbon has a (+) charge. Add that to carbon's microporosity and voila, excellent filtration.
Hennessy1414
Terrorist
No, it will fit fineEvil1 said:
You might be thinking of a keck clip. This is not needed with your E settup. A keck clip is made so the diffuser CAN NOT come undone from the joint of the bong. It clips in in place so you don't accidentally pull out the diffy and smash it into pieces.Evil1 said:
I hope that's what you were talking about.
Hennessy1414
Terrorist
The thing with any glass on glass apparatus is you gotta know how to lock the glass into place! You put in the downstem and give it a twist clockwise so it locks into place. That's how I avoid using a keck clip anyhow.....
p.s. Enjoy the clouds
p.s. Enjoy the clouds
Chubba - when I ordered the 5mm there was a delay getting my payment approved by EDIT - I reconsidered and ended up getting a 37cm once instead - I thought the 5mm would be a bit awkward to pass around.
I got this one :
http://www.everyonedoesit.com/onlin..._Bong_Hexagon_Foot__500ml.cfm?iProductID=5911
and added a diffuser.
It works a charm. I set the E's temp to 195 (instead of 185 for regular vaping). The higher temp seems to work better - I think its because more air is sucked through when using a bong.
What level should I fill the water to ?
Im considering adding a pre-cooler - I know its not needed but I like the science experiment look
I got this one :
http://www.everyonedoesit.com/onlin..._Bong_Hexagon_Foot__500ml.cfm?iProductID=5911
and added a diffuser.
It works a charm. I set the E's temp to 195 (instead of 185 for regular vaping). The higher temp seems to work better - I think its because more air is sucked through when using a bong.
What level should I fill the water to ?
Im considering adding a pre-cooler - I know its not needed but I like the science experiment look
Hennessy1414
Terrorist
...And this statment right here is why I second guess my E from time to timeEvil1 said:
Oh well its stoner friendly (good customer support and remote handy 
) and it blows one hell of a bag. Great for the money, but not quite the heavy hitter I'm looking for. I'll ponder all that later.Well unless im using an inline I like to take out the diffuser entirely. I fill the water line just below the GONG joint providing less chamber to milk up...I.E. Creating thicker hits
Also I can keep the temps on the lower end to fully preserve the flavors all throughout the bowl like you originally enjoyed in the first place. Now this keeps it from being pushed into the darker and darker flavor realms of corn 
Keep it safe and keep the taste....no corn needed
Well unless you want to smoke bowls out of that ash catcher (pre-cooler) then I encourage you to add some to your bong. But if your like me and you want to stick with vapor only I suggest keeping your piece one chamber. like you said up there...more bong chamber space for the vapor to fill up...more air in your hit.Im considering adding a pre-cooler - I know its not needed but I like the science experiment look
Hope your not kicking yourself for not getting the smaller sized 250ML EHLE. I have personally ripped that lil beauty and oh my...the pictures are VERY deceiving. At first I thought it was the 100ML Ehle.
Solid tubes for sure.So far Im happy with the 500ml but Im glad I didn't get the bigger one.
I must say Im temped to smoke through it to see what a difference the water, ice and diffuser make but I know I'll regret it when I can't speak and my throat is on fire.
What temp do you set the E at when you're using the bong ?
I must say Im temped to smoke through it to see what a difference the water, ice and diffuser make but I know I'll regret it when I can't speak and my throat is on fire.
What temp do you set the E at when you're using the bong ?
Hennessy1414
Terrorist
Tiny seed beads added to the bong would make the diffusion a little bit more bubbly
anyhow...I have a V2 Extreme (max temp 250C) and I usually always use the elbow pack method. I warm the unit up with the bowl loaded and glass bowl inserted into the machine. I run it at 240C for 5-7 minutes then I bring it back down to 235C. Ill connect the whip to my bong and slightly drag on it. This heats up the bowl a tad bit more effectively. Once I see the start of vapor forming I turn the temps down to 220C. While the numbers start to decrease I begin to turn on fan 1 to get er' going. Then I up my draw speed and increase to fan speed 2. At this point my mini inline is so full of creamy vapors its almost unbearable. I might turn it down to 215C or 210C in mid hit depending on the type of weed I have loaded. I quickly shut off the fan and pull out the whip clearing the creams right into my head
anyhow...I have a V2 Extreme (max temp 250C) and I usually always use the elbow pack method. I warm the unit up with the bowl loaded and glass bowl inserted into the machine. I run it at 240C for 5-7 minutes then I bring it back down to 235C. Ill connect the whip to my bong and slightly drag on it. This heats up the bowl a tad bit more effectively. Once I see the start of vapor forming I turn the temps down to 220C. While the numbers start to decrease I begin to turn on fan 1 to get er' going. Then I up my draw speed and increase to fan speed 2. At this point my mini inline is so full of creamy vapors its almost unbearable. I might turn it down to 215C or 210C in mid hit depending on the type of weed I have loaded. I quickly shut off the fan and pull out the whip clearing the creams right into my head
Hi vaelrenx,
100ml is a very small tube, with the EHLE. there's about 10cm of height for ice and the inside diameter is about 28mm.
EDIT ships it with the medium cone bowl and a downstem.
100ml is a very small tube, with the EHLE. there's about 10cm of height for ice and the inside diameter is about 28mm.
EDIT ships it with the medium cone bowl and a downstem.
aznfknpride
borosilicate fiend..
vaelrenx- Yup, that's the one. Medium cone bowl.
vape4health
Well-Known Member
Has anyone in PA ordered from EDIT , and at worst would they just take the bong or could I maybe face charge's . Lossing the packing would suck ass but if I'm really doing something illegal I'll just figure something else out .