mrweed
vaporizer review blogger
looks very different from within.
however, they also have their own version of the flowermate, so who knows
Atmos Boss
- Thread starter mrweed
- Start date
looks very different from within.
however, they also have their own version of the flowermate, so who knows
wyatt herb
true born germaican
yes, looks different.thank you. i also looked at their homepage, they also have a stainless steel vapo-pen with detachable oven .
they call it the boss.
maybe we find them on the chinese sites in a few weeks, without branding and much cheaper.
this looks a bit like the tvape
they call it the boss.
maybe we find them on the chinese sites in a few weeks, without branding and much cheaper.
this looks a bit like the tvape
Last edited:
HillaryClinton
Future ruler of earth
Found a vid on the boss, not a great video but its something, it looks like it might work well...
Not sure I am to happy about the heating chamber being a consumable that cost 60 itself....are they expecting these to die often?
http://www.everyonedoesit.com/online_headshop/atmos-boss-heating-chamber.cfm
Kaptan
Well-Known Member
That Atmos Boss looks like an imag plus with a Flowermate mouthpiece, although it looks to have a bit more length than the imag.
Vape Dr.
Well-Known Member
Ok, I have an Atmos BOSS in hand charging. A couple of quick pics so you can compare it to the Imag.
The BOSS is a 1 temp vape 385F. We will see if it is deserving of its own thread.
Unit is 5 1/2" long, 6 1/2 inches long with the MP and 5/8 thick measuring from end to end.
The chamber is SS and has a off centered hole at the bottom to allow fresh air in through the 4 side holes like the raw. There is no coil at the bottom, it is a conduction vape.
I'll keep you guys posted.
The BOSS is a 1 temp vape 385F. We will see if it is deserving of its own thread.
Unit is 5 1/2" long, 6 1/2 inches long with the MP and 5/8 thick measuring from end to end.
The chamber is SS and has a off centered hole at the bottom to allow fresh air in through the 4 side holes like the raw. There is no coil at the bottom, it is a conduction vape.
I'll keep you guys posted.
HillaryClinton
Future ruler of earth
Ok, I have an Atmos BOSS in hand charging. A couple of quick pics so you can compare it to the Imag.
The BOSS is a 1 temp vape 385F. We will see if it is deserving of its own thread.
Unit is 5 1/2" long, 6 1/2 inches long with the MP and 5/8 thick measuring from end to end.
The chamber is SS and has a off centered hole at the bottom to allow fresh air in through the 4 side holes like the raw. There is no coil at the bottom, it is a conduction vape.
I'll keep you guys posted.
Hmmm looks good, so from what I gather no air passes over anything icky like electronics, pretty much a pure path? Looking for a pen vape that has a pure path(No odd glue residue/passing over odd electronics/etc...)
I really like the size, I don't like that the heating chamber is not covered under warranty and they sell replacements for it(Seems like a gimmick to make them fail quicker while making bank quicker).
Vape Dr.
Well-Known Member
Please read
@HillaryClinton The chamber looks very promising.
I contacted atmos to find out the temp because it was not in the manual.
The set temp is 385F.
They offer chambers separately because they have not yet released their oil cans.
The chambers are sold separatelyy so you can have a dedicated oil or herb chamber.
There is no glue or plastic or polymide in the chamber.
Here is a pic of the chamber for you.
The black you see in there is the same material as the SOLOs top of the heating chamber.
Bottom chamber pic.
I went ahead and gave it test run for you @HillaryClinton.
It has a very very very small chamber.
The taste and vapor production are impressive.
First hit.
Second hit.
The ABV is uniform. Super small chamber.
This is a quick efficient 1 person, on their break, grab 6 hits and go vaporizer people!!!
*****IMPORTANT INFO*****
Heats up in 40 seconds.
ONLY STAYS ON FOR 1:15 SECONDS!!!!!
This is a "one hitter" type vape pen. The chamber is very small, but it finishes it pretty nice because it shuts off so fast.
This vaporizer does get you medicated nicely and fast.
This is a vaporizer for a very quick session for 1 person.
Please take note of this fact.
This could only fill the niche of a "hurry up and vape"! at work vape.
From: off, on, vape, off is 1:55 seconds.
Should be under $50 IMO
I don't know who they are marketing a vape that shuts off in 1:15 to, but that's just plain crazy.
I wanted to post this up fast for you guys. There is only 1 other BOSS video, and he makes no mention of the 1:15 shut off time.
Please not this if you are considering this vape!!!
HillaryClinton
Future ruler of earth
That timer limit is a killer really....it sounds like it should cost about 50, you are correct, if it drops down to that on sites like buy.com and Ebay like other Atmos devices I would probably buy one for myself even because it truly is small and looks like an E-Cig, no one would have a clue if I took that out my pockets.
It looks nice enough build wise. Thank you for the info :-)!
At that price the whole thing should be under warranty also...I saw a couple of these on ebay for 100 so far, so maybe it will drop.
It looks nice enough build wise. Thank you for the info :-)!
At that price the whole thing should be under warranty also...I saw a couple of these on ebay for 100 so far, so maybe it will drop.
Vape Dr.
Well-Known Member
@HillaryClinton! your at 420 messages!
There is light at the end of the tunnel! For those with W9 tech carts, the carts fit the boss battery inside threading. I used it with an essential oil and 3.7V Hercules and it works like a champ.
Sweet
There is light at the end of the tunnel! For those with W9 tech carts, the carts fit the boss battery inside threading. I used it with an essential oil and 3.7V Hercules and it works like a champ.
Sweet
Last edited:
HillaryClinton
Future ruler of earth
Haha oh wow didn't catch that, my 420th post, so special!
Wait...so the cart is 510 threaded? So I can just buy the cart and put it on a 510 battery? Or is it more complicated? Maybe with this: http://www.w9tech.com/adapter-tower-style/
Wait...so the cart is 510 threaded? So I can just buy the cart and put it on a 510 battery? Or is it more complicated? Maybe with this: http://www.w9tech.com/adapter-tower-style/
Vape Dr.
Well-Known Member
No, W9 carts are 601 threading.
The inside of the boss had very close to 601 threading, close enough to tighten and work great.
If you get any EGO style battery or EGO twist (twist batteries are Variable Voltage and range from 3.3V to 4.8Vs with the twist of the bottom) they are all 510 threading.
.
You need a 510 battery to 601 (W9 threading) adapter. Those are like $5.
Then you can use any 3.7V W9 cart (KISS, globe, globe coil with Nibbler G water attachment, Hercules with a black 3.7V rod) with a 510 battery.
HillaryClinton
Future ruler of earth
Ahh I see, I have Ego batteries, was curious 
.
.
HillaryClinton
Future ruler of earth
To be fair I would never buy a crafty....not to downplay the company or the product but it does nothing for me function wise or form factor wise, also its way over priced from what a gathered. I feel everything that company makes is highly exaggerated quality wise and price wise though...Just my 
.
.
Meach
Well-Known Member
2 min shutoff on imag pens..1:55 here..no biggie..w all the imag issues popping up this atmis pen might be what I buy..2 min small chamber and it medicates...also clean airpath. Idk but looks like a winner for me..I'm w majority here at sub $70 its a good buy..most atmos products can be found on the cheap an extra to have as backup actually doesn't sound bad...well be combing sites now to pick this one up..thanks for the updates much appreciated
Vape Dr.
Well-Known Member
The draw restriction on the boss is nice, even with the ceramic screen left in the mouth piece. The 4 air holes on the allow air to flow up through a hole at the bottom of the stainless steel chamber.
There is little draw restriction, but enough.
It has a very nice draw IMPO, similar to the transporter or flowermate I would say
There is little draw restriction, but enough.
It has a very nice draw IMPO, similar to the transporter or flowermate I would say
Meach
Well-Known Member
@Vape Dr. I just got one of these last night did some burnoffs then tried to have a couple sessions I could not get anything other than a wispy cloud or two..taste was there but no clouds..once I'd open the chamber and pull out the flowers and they were still green. ..not sure if its a learning curve or what but it took 3 sessions to get abv in the chamber. I've seen the video review I believe was done by you and the pulls you had looked 10x better than what I managed..haven't fooled w the screens yet left them as is...are there any tips you suggest..packing chamber loose or tight or a technique to draw better? A little peeved I cannot warranty my unit as my brother gifted this to me without a sales reciept he called me over the weekend and a head shop was selling them at 25% off..so he picked it up for me as a house warming gift..worst part is he s a otr driver so lord knows when next time hell be passing through Indiana again where he bought it..I just emailed atmos to see how I could register it for warranty in case I have a bad unit
Last edited:
Meach
Well-Known Member
@Gooeyape if you can hear air blowing out when the chamber is empty then there's nothing wrong w the unit..use the packing tool to give it a medium to tight pack in the chamber...make sure your hands aren't covering the air ports on the chamber and draw the vape like you were taking a long sip from a straw...mine works great now my first heating chamber was damaged couldn't hear air or fell air flowing through it. But now this thing is hitting like a champ I can pack about .10 into the chamber and get a solid 6-10 pulls ...usually run it 2 cycles and I'm good
Vape Dr.
Well-Known Member
I always leave my Chambers full but fluffy, I don't pack it down with a tamper. I feel this gives the best results.
paytonpenn
Level 30 Nature/Healer
Hows battery life?