Atman Hachi
- Thread starter seaofgreens
- Start date
HD Springer
Well-Known Member
PPN
Volute of Vapor
Nothing is good, it's big, the grinder doesn't work well and the airpath is very strange (with a bit of tubing in the enclosed unit with a spring in to keep it in a good shape, totally uncleanable and absurd) and on the unit i got there was no airflow at all cause something was stuck (or maybe they forgotten to drill the hole), I was able to open it a bit to give it a try....but the taste was awful, so much I didn't tried it anymore even after some burnoffs more. and there was not enough visible vapor to mention.
I stop to make reviews for Atman cause they don't want to improve their products, the starlight get some potential but they don't want to listen customers/testers. If you are really curious and you have money to throw maybe you can consider their products but , seriously, avoid them all!
PPN
Volute of Vapor
Hi, I don't find the Starlight thread and want to let you know that's the only device from Atman I'm still using. I already mentioned I didn't used the mp but a glass stem which fits perfectly in the bowl. The 500°F setting is awesome for concentrates soaked in cotton/hemp fibers/mesh screen and the 410°F setting is pretty decent and flavorfull with flowers.
A sshame they didn't tried to improve this vape cause there is some potential. I saw there is one on sale in the Classifieds, that's why I give you my thoughts if you get some interest in this vape.
A sshame they didn't tried to improve this vape cause there is some potential. I saw there is one on sale in the Classifieds, that's why I give you my thoughts if you get some interest in this vape.
Hello,
I found this thread online, while browsing for advice regarding the Starlight. I firstly had a Atman Pretty Plus which is like a pen. I found it hit and miss until I realised, by setting it to burn quickly after a previous burn, the ambient temperature in the chamber seems to get much hotter and therefore gave me a far better vaping experience.
Off the back of that, I decided to get a Starlight, but so far I've not been all that convinced by it, so I found this thread
I get pretty nothing unless I'm burning at 500 degrees. There are definitely issues as one person has said with the seal around the edge as well. So I'm on the verge of giving up with it already and going back to the pen. At least that worked.
I saw this idea for using a Dabstorm mouthpiece. How do I go about that? Is it simply a tight enough fit that it will push in?
Cheers for your help everyone
I found this thread online, while browsing for advice regarding the Starlight. I firstly had a Atman Pretty Plus which is like a pen. I found it hit and miss until I realised, by setting it to burn quickly after a previous burn, the ambient temperature in the chamber seems to get much hotter and therefore gave me a far better vaping experience.
Off the back of that, I decided to get a Starlight, but so far I've not been all that convinced by it, so I found this thread
I get pretty nothing unless I'm burning at 500 degrees. There are definitely issues as one person has said with the seal around the edge as well. So I'm on the verge of giving up with it already and going back to the pen. At least that worked.
I saw this idea for using a Dabstorm mouthpiece. How do I go about that? Is it simply a tight enough fit that it will push in?
Cheers for your help everyone
PPN
Volute of Vapor
Hi @StokeLad , welcome in FC!
Straight out of the box the Starlight was not working well for me too. You need a glass stem (glass tube) or metal which fits pretty well the oven (the dabstorm mp +a bit of silicone tubing is nice but doesn't fit tight) cause the original design doesn't permit to the heated air to travel through the load, maybe you can drill some holes in the loading basket too (I thought about that solution but since I hated this plastic mp I never done it!).
If you can send it back to get a refund the best would be to buy something else but if you can't there is some ways to use it like mentionned above. Vapor is tasty without visible vapor at 320°f, decent vapor production at 410°f (this is my main setting for flowers) and the 500°f setting is only for concentrates and works rather well with a substrat like coton or hemp fibers. Settings are very strange but this is the only vape I own offering a 500°f setting, lowest setting is totally unusuable (240 I think).
Don't hesitate to create a new thread for the Atman Pretty Plus since it doesn't exist here, and share with us!
I rarely use my Starlight now but it happens sometimes....
Straight out of the box the Starlight was not working well for me too. You need a glass stem (glass tube) or metal which fits pretty well the oven (the dabstorm mp +a bit of silicone tubing is nice but doesn't fit tight) cause the original design doesn't permit to the heated air to travel through the load, maybe you can drill some holes in the loading basket too (I thought about that solution but since I hated this plastic mp I never done it!).
If you can send it back to get a refund the best would be to buy something else but if you can't there is some ways to use it like mentionned above. Vapor is tasty without visible vapor at 320°f, decent vapor production at 410°f (this is my main setting for flowers) and the 500°f setting is only for concentrates and works rather well with a substrat like coton or hemp fibers. Settings are very strange but this is the only vape I own offering a 500°f setting, lowest setting is totally unusuable (240 I think).
Don't hesitate to create a new thread for the Atman Pretty Plus since it doesn't exist here, and share with us!
I rarely use my Starlight now but it happens sometimes....