SLYTHERIN SMOKER
New Member
I have spent a week reading and I can’t make Temp controls work
I read all 34 pages of the Saionara thread here, 27 pages of the Evape forum, countless google searches and reddit lurking concerning Artic Fox settings. Heres my set up:
RX200S
Saionara Titanium Gen 1 Non Top Flow Cap
4mm coils SS Quartz / SS Black Ceramic.
I downloaded Artic Fox and had a million NooB questions about the basic settings and posted up asking for descriptions or tips.
even posted on the developers site hoping for some enlightenment
nfeteam.org
I installed Artic Fox on the RX200S
I read even more and found some answers but even more questions
The Saionara came with a Kanthal 2mm coil (15-25watts)
I used that one first in watt/power mode, adjusted for preference and set it for 18 watts, 1 sec preheat @150%, and pulsed it.
Result: instant vapor and strong flavor
Using Planet of the Vapes coil chart for wattage and temp range guidelines
www.planetofthevapes.com
Then I tried Temp controls
4mm SS Quartz coil (15-25)Watts
locked resistance at room temperature .30ohm
I tried the Preheat settings: Linear/Curve/Relative % and no difference.
I tried different settings for the coil material:
SS/ SS 316/ TFR 316L/ TCR 102
Read a post on reddit saying HVT coils listed as SS 316 are actually SS 304 and do better in Temp control as TCR 102-104
temps tried: 360/380/400/420F
Watts tried 18-27 tested range
Was barely able to melt wax, no vapor
Tried Temp control with Pi Regulator 0% setting on and off. and a few posts online recommend settings of p300/i300, p300/70
I have no idea how Pi regulator works, but this is what I’ve found and read even if I’m still confused
nfeteam.org
nfeteam.org
I am ordering the TAF Cap and Titanium and Quartz buckets and just want to have this dialed in. So I can make one of these cool vids where I fill my rig with smoke from my Sai
I read all 34 pages of the Saionara thread here, 27 pages of the Evape forum, countless google searches and reddit lurking concerning Artic Fox settings. Heres my set up:
RX200S
Saionara Titanium Gen 1 Non Top Flow Cap
4mm coils SS Quartz / SS Black Ceramic.
I downloaded Artic Fox and had a million NooB questions about the basic settings and posted up asking for descriptions or tips.
Saionara Atomizer thread
Just got a TAF Sai from PIU. I've been wanting to try out the Ti bucket. Kinda new to 510 mod dabs. My only experience with mods is the DT V4 with the quartz cup. Never could seem to get it to work for me. I only load a small amount because I don't want to overdo it. My mod is a pico 75...
fuckcombustion.com
even posted on the developers site hoping for some enlightenment
RX200S/Sai Temp Control Profile settings. Need Help
Hello, First off Thank you to the developers for this amazing software that makes so many of our stock mods, so much better. Also thanks in advance...
nfeteam.org
I installed Artic Fox on the RX200S
I read even more and found some answers but even more questions
The Saionara came with a Kanthal 2mm coil (15-25watts)
I used that one first in watt/power mode, adjusted for preference and set it for 18 watts, 1 sec preheat @150%, and pulsed it.
Result: instant vapor and strong flavor
Using Planet of the Vapes coil chart for wattage and temp range guidelines
Blog
Top rated by thousands of customers. The only vaporizer store with a 100% Satisfaction Guarantee. Free Shipping, Free Bonus Items & Full Warranty Coverage on all vaporizers.
Then I tried Temp controls
4mm SS Quartz coil (15-25)Watts
locked resistance at room temperature .30ohm
I tried the Preheat settings: Linear/Curve/Relative % and no difference.
I tried different settings for the coil material:
SS/ SS 316/ TFR 316L/ TCR 102
Read a post on reddit saying HVT coils listed as SS 316 are actually SS 304 and do better in Temp control as TCR 102-104
temps tried: 360/380/400/420F
Watts tried 18-27 tested range
Was barely able to melt wax, no vapor
Tried Temp control with Pi Regulator 0% setting on and off. and a few posts online recommend settings of p300/i300, p300/70
I have no idea how Pi regulator works, but this is what I’ve found and read even if I’m still confused
PI Regulation - Notes from the queue.
This information was collected from the issues comment threads from the MyEvic (ClockSelect) and Arcticfox projects on the Github repo. The bits...
nfeteam.org
Pi Regulator & preheat
Hello, I'm on AF170624 with an Evic VTwo Mini. I'm testing the Pi Regulator fonction, it seems to work well, but I can't apply preheat to speed up the...
nfeteam.org
I am ordering the TAF Cap and Titanium and Quartz buckets and just want to have this dialed in. So I can make one of these cool vids where I fill my rig with smoke from my Sai
Last edited: