Abv coconut oil, potency

Zzz_90

Active Member
New here and First time making abv coconut oil. Any help is greatly appreciated. I’m just curious to know or get an idea of how potent the batch may be. Right at 40g abv, plan on trying to use as little oil in the process as possible for more potency. 10-15 of the avb is (WiFi) White fire og, the majority Critical Neville haze, and 2-3 grams worth of kief i have vaped. My sessions are 5 min, 30-35 second heat up time, and i normally power off when the times down to a min and or when the toasty taste comes along, roughly around 20 full draws would be the max. I pull the herb right out after the session, mostly all is browned up, some golden, very little green.
Same session times on all except kief, i let it roll till the end of each session.
WiFi - 385F
Haze - 360F
Kief - 340-350F
Not sure if it makes a difference or not, but a lot of the herb i pull from the chamber is still loaded with trichz. Like i said I’m just curious to know a good guys as to how potent this may turn out with what I’m working with. Have zero expierence with edibles.
 

MinnBobber

Well-Known Member
how potent this may turn out with what I’m working with
.....................................
That should be "kick-ass" as , all my bud gets thoroughly hit at 445F at the end. I have minimal supply and need to maximize extraction. Even after that high temp I still get potent ABV.
Yours should be almost as good as cooking up virgin buds :)
360 to 380F temps will leave a LOT of goodies----enjoy
 
MinnBobber,

Zzz_90

Active Member
.....................................
That should be "kick-ass" as , all my bud gets thoroughly hit at 445F at the end. I have minimal supply and need to maximize extraction. Even after that high temp I still get potent ABV.
Yours should be almost as good as cooking up virgin buds :)
360 to 380F temps will leave a LOT of goodies----enjoy
What vape do you use? I have a airvape xs. My highest setting is 428F, anything over 395 just gives me an off taste i can’t really seem to enjoy lol
 

MinnBobber

Well-Known Member
What vape do you use? I have a airvape xs. My highest setting is 428F, anything over 395 just gives me an off taste i can’t really seem to enjoy lol
.....................................................................................................
My main duo is a miniVAP and a Herbalizer, both of which have superb temp control. So both can be run at 445 F, just under the combustion temps YET still yield great vapor without that burnt popcorn taste. ABV a perfect uniform brown.
Note: vapor tastes superb at temps up to 425, and 445 vapor is meh------not bad but not great taste.

Some other vapes I've used max at like 410 and the taste is way worse AND the ABV is way worse ( a lot of way overdone/ light black pieces that taste like crap).

I love these two vapes. Some other top tier convection vapes can also stand high temps without tasting like crap
 
MinnBobber,

Zzz_90

Active Member
How does abv compare potency wise to regular weed. I haven't eaten much before
.....................................................................................................
My main duo is a miniVAP and a Herbalizer, both of which have superb temp control. So both can be run at 445 F, just under the combustion temps YET still yield great vapor without that burnt popcorn taste. ABV a perfect uniform brown.
Note: vapor tastes superb at temps up to 425, and 445 vapor is meh------not bad but not great taste.

Some other vapes I've used max at like 410 and the taste is way worse AND the ABV is way worse ( a lot of way overdone/ light black pieces that taste like crap).

I love these two vapes. Some other top tier convection vapes can also stand high temps without tasting like crap
This airvape xs is my first vape, I’ve always thought it was top notch and has always exceeded my expectations but obv not lol, maybe i need to look into purchasing another. I can’t get anywhere close to the temps you run without dealing with that browned taste. It states it’s hybrid, but i guess it runs more on the conduction side. I’d really enjoy a desktop style vape or a strictly at home device but portability is a must for me. It goes every where i go period lol. I appreciate the help fr, What would you consider top of line for portability, taste, and vapor production out of some of the newer devices. Fire fly 2, davinci iq, airizer air 2, if you may have any exp with those listed.
 
Zzz_90,

Pimpslapper

Well-Known Member
This airvape xs is my first vape, I’ve always thought it was top notch and has always exceeded my expectations but obv not lol, maybe i need to look into purchasing another. I can’t get anywhere close to the temps you run without dealing with that browned taste. It states it’s hybrid, but i guess it runs more on the conduction side. I’d really enjoy a desktop style vape or a strictly at home device but portability is a must for me. It goes every where i go period lol. I appreciate the help fr, What would you consider top of line for portability, taste, and vapor production out of some of the newer devices. Fire fly 2, davinci iq, airizer air 2, if you may have any exp with those listed.
I use and recommend the crafty.
Pax3 or davinci iq or ff2 among many others worth a look as well for sure.
Up to now nothing kicks my ass like the crafty or mighty though and the capsule system is fucking brilliant for reloading in public. I couldn't live without them
 
Pimpslapper,
  • Like
Reactions: Zzz_90

Zzz_90

Active Member
I use and recommend the crafty.
Pax3 or davinci iq or ff2 among many others worth a look as well for sure.
Up to now nothing kicks my ass like the crafty or mighty though and the capsule system is fucking brilliant for reloading in public. I couldn't live without them
Couldn’t agree more on the dosing capsules, i was on the site looking and seen them just the other day. I’d imagine using them also keeps the chamber fairly clean. The crafty would be better sized for me. Are the temps pre-set? Or are you able to customize them thru app
 

howie105

Well-Known Member
The potency of an ABV project is still dependent on the potency of the product used. A hot running often hit party Vape produced ABV supply is going to give you very different results than a that derived from a low temperature, taste oriented, solo, sipping session. So pay lots of attention to titrating the dose after you you process the ABV. Good Luck
 
howie105,

Pimpslapper

Well-Known Member
Couldn’t agree more on the dosing capsules, i was on the site looking and seen them just the other day. I’d imagine using them also keeps the chamber fairly clean. The crafty would be better sized for me. Are the temps pre-set? Or are you able to customize them thru app

The temp is preset at180c with boost to 195c. These are really not bad but you can change in the app as you wish.
I have 175c boost 185c as my preferred temps.
It delivers HUGE clouds even at 175.
Can only recommend!!!
 
Pimpslapper,
  • Like
Reactions: Zzz_90

Zzz_90

Active Member
The potency of an ABV project is still dependent on the potency of the product used. A hot running often hit party Vape produced ABV supply is going to give you very different results than a that derived from a low temperature, taste oriented, solo, sipping session. So pay lots of attention to titrating the dose after you you process the ABV. Good Luck[/
I’m not in a legal state but have had the chance to get my hands on really good nugs and oils that came in from Green states and dispensaries with + percentages of Thc. But over all I’d consider the product used good quality, not as good as mentioned above been not way off range. Nicely frosted and very resonious. Basically to sum it up, mostly all my material was vaped under or at 375F. My low would be 365 which is where its set for the majority. Plus a few mixed bowls with kief here and there daily which i run even at lower temps. 340-360. I’m all ab taste, so as soon as i start to get any slight off tastes, the sess will be ending for me and i quickly remove and store remains. Golden brown, slight green here and there, i can also see lots of glands still intact on the material as i remove it. I’m not exactly sure how it breaks down, moltens up and dissipates i assume. Im up to 50g as of today, i just hope it does something for me since accumulating this pile has been a long 2 months lol. I’ve been anxious, trying to find sunflower lechitin locally asap and am going to try to get every last bit into a cup or just half a cup of coconut oil. I’m leaning just towards the half cup and Get every bit of actives in it as possible and just hope for a good result that I’m pleased with
 
Zzz_90,
Top Bottom