14mm injector bowls?

[letter never sent]

I have a CouchLog, the heater fits 14mm female joints natively. I’m interested in trying it “injector style” with a glass bowl, similar to the DCE, FP, etc.

Does anyone know of a 14mm female to 14mm male adapter that accepts a standard size screen in the middle? I’d prefer non-DH Gate if possible. I like buying American glass when I can.

 

[Bad Dog]

haven't come across any in my travels and I don't currently have a use for one so I haven't been looking but you might want to try TAG glass I know they have 18mm. only 14mm adapter I know is for Minivap but its a 18mm male

 

[Hippie]

The smaller Vapocane came with one

I think bowls like the herbo, terp torch or hot rod will put the heater too far away from the load with an 18/14 adapter but an Elev8r bowl with an 18/14 adapter may work

E2a
The ddave concentrate chamber https://www.ddavemods.com/store/p41/The_Concentration_Chamber.html is another option

 

[Shit Snacks]

We have a separate thread for them now in general:

Glass Bowls for Injector Desktops

Thought I'd start this thread to see if there was interest in aggregating a list of all the different kinds of injector bowls people have liked Obviously the Elev8r waterwand is many's go to due to availability but for micro dose I really like these. Was wondering what other people thought!

fuckcombustion.com

But I've never seen 14 to 14, if you cannot find one that looks good from TAG, try Oregon Glass Blower!

 

[letter never sent]

@Hippie yeah, Elev8r bowl with an adapter might work, but I agree that the heater may sit too far from the herb.

TAG doesn’t have anything that will work from what I can see. I might ask OGB if he could make one custom.

 

[Grass Yes]

This is an old thread but I thought I would add the current bowls that I know of:

GLAS BOWL 18mm - Accessories - Shop | CouchLog

Handmade custom glass bowl from a local glasblower. Developed to fit the heater concept of the CouchLog perfectly.

www.420eng.com

Couchlog Bowl | DFreeZ Designs

www.dfreezdesigns.com

Hopefully this can be helpful for the current and upcoming 14mm injectors.

 

[Grass Yes]

TIL that @invertedisdead sells one on their site:

PHASE3

www.gophase3.com

 

[letter never sent]

TIL that @invertedisdead sells one on their site:

PHASE3

www.gophase3.com

I wonder how that would work with the CouchLog. Looks like you may be able to get the heater a bit closer to the herb with this one. I do find myself wishing it was closer with the official CL glass bowl.

@invertedisdead what size screens does your glass bowl take?

 

[coolbreeze]

I wonder how that would work with the CouchLog. Looks like you may be able to get the heater a bit closer to the herb with this one. I do find myself wishing it was closer with the official CL glass bowl.

@invertedisdead what size screens does your glass bowl take?

Brings it real close, maybe 1/3 inch?

 

[invertedisdead]

TIL that @invertedisdead sells one on their site:

PHASE3

www.gophase3.com

Well that's pretty fast considering I just put them up on the website yesterday

Thanks a lot for the mention!

I wonder how that would work with the CouchLog. Looks like you may be able to get the heater a bit closer to the herb with this one. I do find myself wishing it was closer with the official CL glass bowl.

@invertedisdead what size screens does your glass bowl take?

I use half inch stainless steel screens (12.7MM)
I personally run them at the bottom of the female joint, but some people like to push them all the way to the bottom down by the handle.

Heads up, I don't have any of these in stock right now, I just added them yesterday with my SX pre-order, but I'll be placing an order for more adapters probably today.

 

[Grass Yes]

Has anyone tried the Dfreez CL bowl with the Z8? I'm curious if the shelf is a problem. I think, @coolbreeze, that you have the Z8 and the Dfreez bowl?

 

[coolbreeze]

Has anyone tried the Dfreez CL bowl with the Z8? I'm curious if the shelf is a problem. I think, @coolbreeze, that you have the Z8 and the Dfreez bowl?

I do, and unfortunately the opening is too small to seat the heater, it just sorta slides across the top. I'd love to see him make a more general-purpose 14mm injector bowl with an actual 14mm taper inside.

 

[Grass Yes]

I do, and unfortunately the opening is too small to seat the heater, it just sorta slides across the top. I'd love to see him make a more general-purpose 14mm injector bowl with an actual 14mm taper inside.

That makes sense. Thanks for checking!

 

[rvarick]

Brings it real close, maybe 1/3 inch?

Thanks for posting this image. Do you (or anyone else?) use this bowl with you Couchlog? If so, was wondering how it may work in practice. Or does it just get too close to work well? TIA!

 

[coolbreeze]

Thanks for posting this image. Do you (or anyone else?) use this bowl with you Couchlog? If so, was wondering how it may work in practice. Or does it just get too close to work well? TIA!

I'll give it a try afterwhile.

@rvarick , I just tried it with maybe .05g+ and set at about 4.6 (pretty low on mine) and it worked like a charm. Reasonably even brown, great flavor, great effects. Works fine at low temps, I would say.

 

[coolbreeze]

Got a new 14mm injector bowl, preliminary report: mighty fine! This is one of @Haze Mister's new creations and I really like this bowl!

 

[DaVapeGuy]

Got a new 14mm injector bowl, preliminary report: mighty fine! This is one of @Haze Mister's new creations and I really like this bowl!

Definitely a unique looking bowl.

Is it frosted inside?

How does the screen sit in it?

Seems a bit far from the load, did you have to turn your PID temps up?

 

[coolbreeze]

Definitely a unique looking bowl.

Is it frosted inside?

How does the screen sit in it?

Seems a bit far from the load, did you have to turn your PID temps up?

I'll get some pics together but it is frosted, and then it expands slightly to a small chamber with 3 teeth that hold the screen securely with a little friction. Didn't have to turn it up at all. It's at 480 F and it roasted very well for that temp. It feels open, too.

Edit: You can see the chamber is short and narrows at the top; I think the shape holds it tight. On the 18mm the injector nozzle comes much closer to the screen (Hot Rod, B0) so I may position the screen below the spikes (at the chamber's bottom) a slight PITA. The 14mm, though, seems perfect for the Phase3 heads. I assume it's also perfect with the Thunderbolt!

 

[Abele Rizieri Ferrari]

@woodyvapors on insta made these 2 beautiful 14mm bowls for me.

https://imgur.com/a/VePSPS1

 

[howie105]

The working model around here, at the moment is a wooden size adapter. The top side gets stepped bored to accept a 14 mm to 14 mm male to male and the bottom side gets stepped, counter bored to work with either a 14 mm or 18 mm male to male load carrier using an associated rimmed, top hat screen as the load carrier.
Early 14 mm version, for a PID driven Elev8r.