• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Search results

  1. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    Very interesting , How are you able to fit whole nugs into your stem? Do you not use a basket screen? For a little while I was using whole nugs in my mighty and got good results. I imagine the terps are even better?
  2. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    it’s more of an on demand vape definitely. I consider a session vape to be synonymous with conduction. One where the heater/oven of the device stays on the whole time regardless of whether or not you are inhaling. With that being said the Milaana is a convection vape, the oven is on only when...
  3. Jayvape

    Discontinued RBT Splinter (All Versions)

    If those are your settings from the vid, your splinter looks like it's pumping out vapor. Are you asking me if the Z makes bigger clouds with 0.1 grams than the video you posted? If so I would have to check, I was pretty baked last night and didn't really pay attention. Also I believe we're at...
  4. Jayvape

    Discontinued RBT Splinter (All Versions)

    I decided to switch it up and use my ZV2 tn, instead of my splinter and I have to say damn. It still hits like a truck. I was using my same setup (G3D with TUBO. Cold resistance was .423, I dropped it down by .005 to .418, locked. TCR M2 set to 145 and power was at 40W. I was at 350F. 3 hits was...
  5. Jayvape

    Discontinued RBT Splinter (All Versions)

    hmm interesting, I have check set to no as well.
  6. Jayvape

    Discontinued RBT Splinter (All Versions)

    Oh basically I'm just trying to take a second hit too soon and the heater hasn't cooled down enough to return to the saved cold resistance value? Thank you for the help! However when that message pops up I don't get the option to pick between NEW or SAME coil. The message just pops up whenever...
  7. Jayvape

    Discontinued RBT Splinter (All Versions)

    thanks! whoa this set up looks sick! My poor bank account lol Edit: Does anyone know a fix to this or how it happens It's saying " New coil 0.28 ohms Right --- Same coil 0.25 ohms Left"? It's Tubo Firmware. I get this message in TCR mode but not power mode, kind of weird.
  8. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    I've been back and forth between the MV1 and the Mighty and RBT has put both vapes on ice as well. The terps on my Mi and Splinter are insane and the effects are felt in my soul. I forgot how much of a punch RBT packs.
  9. Jayvape

    Discontinued RBT Splinter (All Versions)

    okay, thanks so much! I've heard a lot about Red Panda and Artic Fox but I've only ever tried Tubo and Sur_myevic. Tubo has worked for TCR but I couldn't get sur_myevic to work with TCR mode consistently without getting errors. Edit: also that cooling stem looks insane where did you get it?
  10. Jayvape

    Discontinued RBT Splinter (All Versions)

    Okay thanks!
  11. Jayvape

    Discontinued RBT Splinter (All Versions)

    I forgot how hard both my splinter v1/+?( it's bubinga and has the thinner clear glass) and my ZV2 hit! I love my Mi2 it's fantastic but after using my splinter last night I may have to put down my Mi for a little while. Taste was somehow even terpier( prob bc I was using only 25 watts) and it...
  12. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    Okay thank you! I've only ever combusted when using a water pipe and even then it was really difficult so hopefully I won't run into that again. Wax? That's interesting, what kind if you don't mind me asking? After reading this I'm tempted to throw some in my shorty xlr8, where did you get the...
  13. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    Oh really? Sometimes if I'm out with my mi it can be a hassle to carry around my xlr8 stem. I like the size of the shorter standard stems but the vapor is just to hot and uncomfortable for me to use, that's why I was looking into cooling beads. Why is it a nightmare to clean up? I would think...
  14. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    Hindsight is always 20/20 right. That makes more sense thank you. Just out of curiosity what does the hardness of the bead have to do with cooling? Are harder beads worse at absorbing heat?
  15. Jayvape

    Discontinued RBT Milaana 1, 2, 3

    I wanted to try and put some cooling beads in my shorter stems for better cooling, does anyone have any recommendations? I read on a reddit post earlier something about breathing in quartz dust is bad for your health so I'm trying to avoid quartz.
  16. Jayvape

    Discontinued RBT Splinter (All Versions)

    Yeah I used NFE Tools to upgrade and it worked
  17. Jayvape

    Discontinued RBT Splinter (All Versions)

    Thanks! I tried to update to the latest firmware from here but when I use the updater, my device is not recognized. Thanks for the help anyway though I was actually able to figure it out, thanks! What pwr do you have set? By default mine was at 70 watts, is this good? Or should I lower it to 50...
  18. Jayvape

    Discontinued RBT Splinter (All Versions)

    Hi I know this wasn't @ me but I have tubomyevic on my wismec, could you let me know what to do to set up tcr? I have tried tcr in the past but with little success
  19. Jayvape

    Discontinued RBT Splinter (All Versions)

    Oh okay, thanks everyone for the responses, I used a scraper to get the sap off and back to smooth again. Is this something I'm just gonna have to deal with in the future or can I put something on it so sap doesn't ooze out again? I was using it at 40 watts when it happened. Edit: Would getting...
  20. Jayvape

    Discontinued RBT Splinter (All Versions)

    Does anyone know what these drops are on my splinter z v2? It must've happened while I was using it, it was dark so I didn't notice till after I already had a stem. It looks like moisture coming out of cracks in the wood. I tried scraping it smooth but it looked like " wood powder" ( idk what...
Top Bottom