Well done chap! What is your opinion on Dani?I have the same combo of vaporizers
-
SCAM WARNING! See how this scam works in Classifieds.
Dani Fusion by Battery-free Ganz
- Thread starter batteryfreeganz
- Start date
DgN'R
I'm No Superman!
I'm really impressed with the Dani Fusion 2.0 Artemis 
I use it with my Blazer FireFox on the high temp zone (add +5 seconds after the click) and it takes about 25 seconds in all. It offers good retention and I usually get four tasty draws
The only negative point for me is the induction heating with the Wand. Although the cap is magnetic, the performance is quite poor. I use it by inserting it from the bottom this way (at the maximum temperature of 430°C), because from the top it's even worse (and it would probably take two consecutive heatings to achieve the same result):
This way, heating takes about 1 minute 45 seconds.. in comparison with my TA2 and inserting it in the same way (and at the same temperature), it takes about 1 minute and 15 seconds..
Anyway, it's the best vape pen I've tried so far, and the design/finish is so incredible.. truly magnificent work
I use it with my Blazer FireFox on the high temp zone (add +5 seconds after the click) and it takes about 25 seconds in all. It offers good retention and I usually get four tasty draws
The only negative point for me is the induction heating with the Wand. Although the cap is magnetic, the performance is quite poor. I use it by inserting it from the bottom this way (at the maximum temperature of 430°C), because from the top it's even worse (and it would probably take two consecutive heatings to achieve the same result):
This way, heating takes about 1 minute 45 seconds.. in comparison with my TA2 and inserting it in the same way (and at the same temperature), it takes about 1 minute and 15 seconds..
Anyway, it's the best vape pen I've tried so far, and the design/finish is so incredible.. truly magnificent work
Bakin4Life
Oink
Pipe cleaners here. Can be bent double / triple, as desired. Then a little wax on the outside, once done.
Although the SS sleeve isn't removable (unless you've got a mechanical press -- and don't do this!), I find my Dani pretty easy to clean. Although I do keep the metal tip assembly mostly in one piece (the two pieces that you turn to adjust airflow, which are very hard for me to pull apart, and also difficult to visually line up the two holes for max airflow, when reassembling).
Just got back home from 3 month trip. Took Dani, Anvil (and Ispire for both), plus a desktop ball vape. Which did I wind up using most, during that time? The Dani (although I've since switched back to the ball vape, upon returning home).
Just figured I'd update again with my ongoing saga of the Flare. BFG has been pretty slow to respond... the second unit works fine initially but it seems like as soon as any of the batteries drop below a full charge the unit starts to lag with its heating cycle. I'm hoping they are able to resolve this but it's been a loooong conversation so far. Tbh at this point it's annoying enough to make me avoid using my Fusion bc I don't want to bother with it
TedJones
Well-Known Member
That’s a big bummer
Assume you’re using quality batteries in there? Not wanting to torch it either?They are standard batteries from Amazon but had solid reviews, and I checked with BFG before ordering that they'd work well. And nope, not torching it. I do 85W for about 40 seconds for the first heat, then it only takes 20ish seconds for subsequent heats.That’s a big bummer
Now BFG wants me to send in my Flare AND my Fusion for them to examine, no mention of a replacement or timing for it all. It's a lot to ask tbh. At this point I'd almost rather just take a refund and be done with it
TedJones
Well-Known Member
I’d recommend trying different batteries first if you don’t want to send it all back. Molicel from reputable vendors like illumn.com or imrbatteries are great. I’ve been buying from them for years. Might be able to get them cheaper elsewhere, but I’ve heard they’re more or less “2nd quality “.
stonedBBer
Well-Known Member
Is BFG planning a newer updated dani fusion or are they just gonna keep making that one?
prayerplant
Well-Known Member
Pleased for you, shout it out!
Out of my vapes that are pretty much all manual, I use my Fusion 1 more than any other by a long way. I use the head on the Tempest stem using an 8mm/9mm adapter.
stonedBBer
Well-Known Member
Who makes 8/9mm adapters these days. Tincturous is always sold outbPleased for you, shout it out!
Out of my vapes that are pretty much all manual, I use my Fusion 1 more than any other by a long way. I use the head on the Tempest stem using an 8mm/9mm adapter.
TigoleBitties
Big and Bouncy
prayerplant
Well-Known Member
Battery Free Ganz to DynaVap Adapter
We have had the Battery Free Ganz to DynaVap adapter made to allow people to connect their Dani Fusion (or other BFG) tip to any DynaVap stem of their choosing.
kegstandman420
Well-Known Member
got the fusion 2 recently and REALLY loving it. I like the fact I can hit it with a big flame torch and it's ready in under 10 seconds, and subsequent reheat take 2-5 seconds. Only thing above it may be the tempest, but I've had the tempest almost a year and a half and spent a lot of time with it. I think the fusion 2 is just as capable.
tasticleeze
Steward of the Garage
Love that oak wpa and a very cool warty hook!
kegstandman420
Well-Known Member
Thank you I appreciate that. The jhook was a custom from my good friend glassfloart. The wood stems were made by me. The oak wpa and a few of the others are available on my etsy "greenthumbwoodworkz"
mazinho420
Member
you will need a new sleeve and capacitor https://batteryfreeganz.com/products/mini-wooden-stem-new
vaping herbs
Well-Known Member
I would now like to buy a dani fusion 2.0. They are available in several versions. Metal stem, mini stem and wooden stem, which version would be advisable for a klutz?
coolbreeze
Well-Known Member
I use mine on the WPA and the long wooden stem, both are excellent. The long stem is easy to handle.
tasticleeze
Steward of the Garage
What’s the deal with the new flare version mentioned in tempest thread?
Anyone know where I can learn more?
Anyone know where I can learn more?