Custom 3D printed Widgets - Delta 3D Studios

maremaresing

Well-Known Member
Accessory Maker
Love the new website! The old one was eye searing, and this is pleasant with a nice layout.

I have the slim case for the V3 Pro and it's been a game changer for my dedicated purse/hydration hip pack/daypack V3P. Best part is the device can be used without removing it from the case, since the air intakes are exposed when open. I can even use it with my wrist guards on, keeping the device itself safe and clean. It's great!

The lobo slim case is neat, because it does protect the stem. You couldn't use it in the case, but cutting a small slit in the bottom where the intakes are would fix that.

Side note: My v3p capsule loading tray is still mvp. Moreso now that I have the Fury 3 (which I adore) and use the v3p and f3 caps with it.
 

Delta3DStudios

Well-Known Member
Accessory Maker
Love the new website! The old one was eye searing, and this is pleasant with a nice layout.

Happy to hear it! I totally agree. I was hesitant to go with a dark-mode themed site, but my developer really knocked it out of the park with the color scheme :luv:

I have the slim case for the V3 Pro and it's been a game changer for my dedicated purse/hydration hip pack/daypack V3P. Best part is the device can be used without removing it from the case, since the air intakes are exposed when open. I can even use it with my wrist guards on, keeping the device itself safe and clean. It's great!

Woot! Happy to hear it - for sure these slim cases are a massive PITA to make since the raw plastic sucks up moisture like crazy so I spend a lot of time drying the raw materials before I print a case to ensure the best surface quality possible. I think the finished product is worth it - it was the first product I *had* to make for my new Firewood10 - don't want to scratch that baby!

Side note: My v3p capsule loading tray is still mvp. Moreso now that I have the Fury 3 (which I adore) and use the v3p and f3 caps with it.

Love it! I was thrilled when I learned that the Fury3 uses the same capsule size as the POTV One/V3p/Edge/Roffu/etc - makes my life much easier!


I suggest everyone keep an eye out tomorrow for a new banner - I just might be running my best sale *EVER* on the website for a very limited time 🤫
 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
Hey all! Spring’s in the air! If only I had time for some shop spring cleaning!! 😩

Few updates since my last big post.....

Jyarz Containers Are Back - I don't believe I mentioned it here, after nearly a year, @JyARz containers are back in stock! Right now I’ve got blue and orange Satchmos available - grab them while you can.

Hinged Capsule Case Upgrade
Early testing showed my single‑layer hinges were too fragile for heavy daily use. I’ve redesigned them with three criss‑cross layers for much better durability. They’re a bit stiff at first but will loosen up - just don’t bend them backward too often to extend the lifespan of the hinge.

TightVac Mini Toothpick Debowler
You asked for something smaller, so I built a Mini Debowler that fits the tiniest TV0 Tightvac (0.06 L). I don’t think I can get any smaller with a replaceable toothpick 😂.



r/Delta3DStudios Is Live
I’ve revived our old subreddit so we have a home base for all things D3DS. No more spamming the big subs - come join the conversation for product drops, behind‑the‑scenes shots, and random links.
https://www.reddit.com/r/delta3dstudios/


Instagram Giveaway
To beat the shadowban, I’m running a contest next month—like, share, and tag friends on the giveaway post to enter. Grand Prize includes a debowler, scoop tools, a shirt, and more (over $75 total value). Details here: https://delta3dstudios.com/blog/instagram-june-2025-giveaway/



Thanks for all the support - see you in the sub and stay tuned for more cool stuff soon!
 

Delta3DStudios

Well-Known Member
Accessory Maker
Hey all! Hope you're having a killer summer 😎 . I'll be completely honest - I planned on a relaxing summer around the shop, but instead I've been slammed with nonstop work and haven’t had time to share much on social media :ugh:! I swear I need to find someone who can help handle that for me because it’s a full time job in itself! Anyway there's lots of cool stuff that's happened over the past few weeks, so let's jump into it.

First, I've teamed up again with JoDa (@VaPeD&CoNfUsEd) to release a new extended length Firewood FATx cooling stem and matching 14mm WPA. I've personally been loving the prototype cooling stem on my own FATx - it's a fantastic upgrade. Additionally, I just published a quality 14mm whip to waterpipe adapter. And due to popular demand, I’ve also published a new cooling stem and a 14mm WPA for the Lamart BAKx vaporizer. Excited to hear your feedback on these!


And with the help of precise measurements from an awesome customer, I also designed a Tafée PotVault as an alternative to the OEM glass cup. Personally, I think the glass cup is neat but unnecessary for everyday use, so I feel like the PotVault is a much more functional product (note that I also offer an optional potloader top if you want to load all 7 pots easily and efficiently).
Note the new sweet Charcoal Stardust color!

But what's really exciting: I recently added a new advanced 3D printer to the shop, giving me better quality and reliability for larger prints with the help of a more controlled environment (temp-regulated build chamber). With this, I'm now able to offer a new lineup of rugged cases featuring custom soft liners. Sure, rugged case 3D models are everywhere online and can be easily customized to your heart’s content, so I've been sure to provide clear dimensions for all my inserts - you can grab a case anywhere if you'd like, 3D print one yourself, or pick up one of my new DeltaVaults. I've added convenient notches to the internal lid corners so you can easily swap out moisture packs within the HumidiNook whenever needed. But if you want to skip the extras and save a few bucks by sourcing your own case, you absolutely can! The thing I like about this setup is that you can always swap out inserts later without needing a whole new case.

First size I've published is the mini DeltaVault DV0, ideal for dosing capsule storage and other small items. The standard case comes with a HumidiNook lid pocket. Inserts are ready now for AirVape Legacy Pro and Storz & Bickel capsules - need a different size? Just shoot me a message! Keep an eye out for more DeltaVault sizes and inserts coming soon. There might even have one big enough for a vape :cool:


And the biggest news of the summer - I finally launched a rewards program:rockon:! Now you'll earn points for purchases, answering quick surveys, sharing referral links, following on Instagram/Reddit, etc with more ways to earn in the future. You can redeem points for free products, discounts, and more. This was a huge undertaking that took many long nights to get it set up, so let me know if anything isn't working right. And since I definitely don't want anyone here feeling left out, especially my awesome FuckCombustion family, I've created a retroactive points claim form. Drop your info there, and I'll apply 2 points for every $1 you've spent on the site over the past decade.



As usual, I've got plenty more cool stuff cooking - check back often, because you never know what I'll publish next!
 
Last edited:

Flotsam

Well-Known Member
Totally cool idea w the retroactive points for your points program. Lots of new products as well.

I did want to share a product idea for you. I do all my consumption away from where I store my DHV stuff. So I bring my things to a nice outside porch sesh spot. I have a nice water rig I use for my Terpcicle session, but then bring my torch and a few tools to the sesh.

So my idea is to add storage provisions to my torch base. So what I typically bring in addition to the torch is:
Test tube holder metal for holding hot terpcicle heater or loaded tube
A multifunction tool to stir the herb after initial session
Something to hold the hot test tube or spare tube
Maybe abv storage?

Just an idea as the base is removable at least on mine and then I have everything I need all together. So call it a tool caddy
 

Delta3DStudios

Well-Known Member
Accessory Maker
Thanks! Yeah it took me a long time to find a rewards program I could honestly afford. So many of these programs are built for companies making millions a year who can afford big bucks for all the features. I'm glad I found a flexible system to work for my needs so I can finally offer loyalty points to so many of my awesome returning customers (I wouldn't be here without y'all).

I did want to share a product idea for you. I do all my consumption away from where I store my DHV stuff. So I bring my things to a nice outside porch sesh spot. I have a nice water rig I use for my Terpcicle session, but then bring my torch and a few tools to the sesh.

So my idea is to add storage provisions to my torch base. So what I typically bring in addition to the torch is:
Test tube holder metal for holding hot terpcicle heater or loaded tube
A multifunction tool to stir the herb after initial session
Something to hold the hot test tube or spare tube
Maybe abv storage?

Just an idea as the base is removable at least on mine and then I have everything I need all together. So call it a tool caddy
I can totally help - I'd love to see some photos/measurements - can you shoot me a private message or send me an email? I'm having a bit of a hard time imagining exactly what you need.

That said, I am working on some other organizational systems right now to bring order to the chaos. I'm really excited to share more info on that project over the coming weeks once I finish prototyping.
 
Top Bottom