RAG
Well-Known Member
Good to hear that you're getting a new one! And too bad for us none of us replied to your post in time
I´m always down to do teardowns 
AirVape Legacy Pro
- Thread starter JohnJacobs
- Start date
I´m always down to do teardowns 
Capsules should be available on mid Dec.
BF deal is already out; read back in this forum, it will be 100 USD off. In Europe as well. I assume it is the best to order, but I will let you know Custom held up many packages recently. If you want the unit fast, local dealers are the best shot.
BF deal is already out; read back in this forum, it will be 100 USD off. In Europe as well. I assume it is the best to order, but I will let you know Custom held up many packages recently. If you want the unit fast, local dealers are the best shot.
When does the black Friday sale start? Friday?
yes
Dr. G
Old Resident
Thank you Gary. I ordered my Pro again...I am so thankful for your UPGRADE program. Since I had previous purchases I was able to get a highly reduced PRO...I am so very thankful for this program. I love my PROOOOOOOOOOOOOOOOOO! Bernadette took care of me via email...stay well and thanks for stopping by here.
Is there anyway to visually tell if my mouthpiece is the old or new model?
And also, I was using my ALP for the first time with the bong today, used a whip to connect to the mega globe. But in the middle of the session, 230 celsius, the vape turned off with like 3 minutes left on session mode. I tried two more times and it happened again two times.
I took off the whip and used it normally and it was working fine, any ideia what could it be?
And also, I was using my ALP for the first time with the bong today, used a whip to connect to the mega globe. But in the middle of the session, 230 celsius, the vape turned off with like 3 minutes left on session mode. I tried two more times and it happened again two times.
I took off the whip and used it normally and it was working fine, any ideia what could it be?
Last edited:
Dr. G
Old Resident
That is a great question...I do notice on mine. It is super snug. I have to give it a good thumb push and that thing DOES NOT come out easy whatsoever. I have seen like when George had his review yesterday...his mouth piece came out super easy...so, it got me to wonder if he had the newer model...I wish he would re-review it. I love George from Vapefiend. He did not mention my FAVORITE part other than flavor....wireless charging...BINGO! Sold! Love it.
seedy53
Well-Known Member
date of purchase - they changed old with new mp about 2 months ago, i think
Thing is I'm in brazil so not sure what batch they are selling here, mine it's snug but I feel like it will come off easily if it gets stuck in my pocket or something like that
MagnumMafia05
Well-Known Member
if it doesnt move physically iirc for a minute it turns off. I asked about it awhile ago on here.
** it's 3 minutes** it's in the manual
seedy53
Well-Known Member
contact airvapeusa
do not know if it will help because of your location
Just for ease of search
Black friday code WCBF
Gets you $100 off on the airvape site
@VapeFiend.com also have it at 20% off iirc around £170 if you are in the uk and dont fancy risking import tax
Black friday code WCBF
Gets you $100 off on the airvape site
@VapeFiend.com also have it at 20% off iirc around £170 if you are in the uk and dont fancy risking import tax
Sue Narmy
Well-Known Member
I will probably do the sameOrdered mine from Vapefiend
Sue Narmy
Well-Known Member
I didn’t realize Vapefiend don’t sell the WPA so I ordered that from Recommended Vape Supplies.
Dr. G
Old Resident
My best friend has used the wax pad successfully...I have not tried it. The battery I use is the one it came with...I got an extra one.
18650BatteryStore.com is where I buy batteries in general. My Pro currently is using the battery that says LEGACY on it from their website.
I have used the wax pad and it works very well. I have used wax and shatter and have no complaints.
I use a Samsung 30q battery, $13.99 from my local vape shop. The battery has to be a minimum of 10a or higher. So far no issues at all. I charge it on an external battery charger.
As usual a weed vape is not optimal for trates
But this liquid pad does work better than others I've tried
I think it is the looser weave letting more air through
Any battery that is rated at 10a draw or higher will do
The mah is not the thing to match
It's the amp draw
El Peligroso
Well-Known Member
“Trust but verify”. gotta always be on the lookout for black swan type situations, which is why companies/products that have been out for years have all those issues sorted out by the time you decided to buy it like the aluminum dust issue, or the product is not recommended via word of mouth bc they never address the problem.
since this is a relatively new product Im just waiting for a full tear down for peace of mind. Although theres a low likelihood there’s anything really wrong with the AVLP since there’s a lifetime warranty and it’s an improved version of a previous product.
The aluminium dust wasn't sorted before you buy
It happened to customers, as did the melted plastic
Your message didn't respond to anything I asked? Or the ratings of their med cert
What parts are you suspicious of? Or you think have been withheld?
And if people read this thread in full you'll see I am one who loves teardowns and transparency - bring back Randy
But I see other vapes not getting near the scrutiny I've seen here and some of them have massive followings and more suss parts
Yup, I love transparency and knowing what is in my vapes
All for it
I see more people alluding to things they don't know though - and no one grabbed the unit @Dr. G offered for teardowns
Maybe they should have typed less and grabbed the unit to look at if this was the priority
Then it would be there for all to see by now
El Peligroso
Well-Known Member
No the aluminum dust/plastic was found out by consumers and then reported, which was then fixed. That’s what I’m talking about, if they never fixed the aluminum dust/plastic issues it wouldnt have survived being a recommended product to this day.
i really don’t know how to respond to the medical certification other than if they're not medically certified there should be a class action lawsuit and there isn't, so thats good enough for me. the mighty medic vape has been confirmed by users here to be the same as the consumer model. I really don’t care about the past models that are no longer available for sale that only went to 360.
im not worried about other vapes with suss parts bc I’m not looking to buy them. I’m mainly looking at this and the mighty.
as for the part I was worried about, idk if it was a "part" or part of the air path but this was the post that has given me pause. it started off talking about the spinning screen.
I dont know how to do teardowns, that’s unfortunate no one offered to do the teardown. You’re giving off some unpleasant vibes though with your passive aggression and whataboutism ("this vape doesn't have a teardown" "what about those other vapes that have bigger followings and suss parts??????")Please dont say that you'll offer more than 30% off
How come it's only for internal use? That's a stupid move from the companys side in my opinion. Feels like there is something to hide when companies dont want to disclose these kind of things, not saying that this is the case but I wont take anyones word until I can verify it myself. I´ll be shelfing the unit unit I know 100% whats in the internals and how the air is routed and through/over what, Feel that this is something any vape company should disclose. We are breathing through your device and we want to know that it's 100% safe to do so.
Maybe I´ll do a teardown of the device and post here, then it really doesnt matter if you disclose it or notJust have to have the time for it
Have a good night sir/ma'am/non-binary formal address
Not Nice. Warning point issued.
Lol
You are the one who just acted extremely passive aggressive
I simply asked what you keep eluding to but not mentioning
You keep saying "one part " has not been answered
What part?
And what do you mean about a spinning screen? Lol
What is your issue with the oven screen moving?
Your messages are not very clear
And you have been the bad vibe and passive aggressive in this case
Wow mate
Learn how to relay information clearly - and how to not be upset at a message on a forum that didn't attack you in any way shape or form
You're the one who "what about ism" with raising the S&B stuff
Contradictory behaviour twice in one post
Congrats
El Peligroso
Well-Known Member
A comparison between the only two vapes I’m considering to buy isn’t a whataboutism, it’s a comparison. Is it illegal to compare vapes in threads now? Rhetorical question.
I answered all the other questions as truthfully as I could, I associated the bottom spinning screen post with the “lack of a proper teardown” post.
Idk what else to say but thank you for giving me a reason to block you.