Multi-brand Planet of the Vapes ONE

[iDRINKBLEACH]

^^ See if there's gonna be a sale on BF. If you use outside, I assure you it will become your go to vape. I bought it for $109 with the aluminum bowl & have certainly got my monies worth. It's just so stealth & easy to use.

That's what is appealing about it is the size. My TM and 510 mod are small and discreetish but I'm to clumsy to risk bringing those to the river or what have you. I'm going to watch Troy's video here in a min to see the improvements

 

[RustyOldNail]

I’m happy with my Ambit through water rig, only complaint is the temperatures are way too high, not calibrated properly.

Wondering if the POV ONE, is basically the same as my Ambit, or a worthy upgrade? On first look they look very similar.
Thanks.

 

[Summer]

From what I've read of the Ambit, the mp gets hot, hence, why it shines through water. The One doesn't; I've never tried it through water. Add'ly, I like the versatility of the One's mps being interchangeable with the F2, FE & even the Simrell Vortex. Having the CFX, I don't like straw-style mps.

 

[joner]

Contemplating getting a One. Typically an on-demand microdosing user. I like being able to end my sessions in case something pops up, however, most times I'm just sessioning my on-demand vapes.

For out and about I use my VLeaf Go and Dynavap. Home I usually use my e-nano, but also love my milaana, Lotus and Piro, and occasionally my tubo (too many settings for my liking lol). I like self contained units w/o glass for out n about.

I had a mighty and a crafty, and a tera and ended up never using them and sold them all (however I'm Kickin' myself for selling my $50 crafty). Bowls were too big, didn't love sessions.

However now I'm allured back to a session device, and the One always appealed to me. I also don't have any conduction session vapes and I find they're great for cold climates (cold weather isn't great for convection, and who likes spinning a vapcap at -20 C). I can't find whether or not the One is a convection only, a conduction only, or a hybrid. Which is it? Is the allure simply VAS or does this vape fill a whole in my use cases? Does anyone stack the One up against similar vapes as mine? Is it a good COLD weather vape?

 

[Vitolo]

The One is a conduction unit, with some convection leanings.
It is an excellent cold weather vape.

 

[joner]

The One is a conduction unit, with some convection leanings.
It is an excellent cold weather vape.

Thanks for the prompt response @Vitolo ! I'm waiting to see if any portable induction heaters will go on sale for black Friday for a feller in Canada; if so I'll have to make a decision between the two.

I reckon an IH would probably make winter dynavapin a little more tolerable.

 

[Deleted member 66001]

Contemplating getting a One. Typically an on-demand microdosing user. I like being able to end my sessions in case something pops up, however, most times I'm just sessioning my on-demand vapes.

For out and about I use my VLeaf Go and Dynavap. Home I usually use my e-nano, but also love my milaana, Lotus and Piro, and occasionally my tubo (too many settings for my liking lol). I like self contained units w/o glass for out n about.

I had a mighty and a crafty, and a tera and ended up never using them and sold them all (however I'm Kickin' myself for selling my $50 crafty). Bowls were too big, didn't love sessions.

However now I'm allured back to a session device, and the One always appealed to me. I also don't have any conduction session vapes and I find they're great for cold climates (cold weather isn't great for convection, and who likes spinning a vapcap at -20 C). I can't find whether or not the One is a convection only, a conduction only, or a hybrid. Which is it? Is the allure simply VAS or does this vape fill a whole in my use cases? Does anyone stack the One up against similar vapes as mine? Is it a good COLD weather vape?

The POTV One was my first vape and it was perfect for what I needed........but........nowadays, the battery is just too darn small. If I ever went that route again, I'd go for whatever they're calling the middle version of the Healthy Rips iteration. It all depends on how much you need to get medicated, obviously, but just keep in mind if you need even more than average, your gonna be finishing your load in a different vape.

Edit : Just saw the word microdosing...................shit, sorry...........should be perfect for you then!

 

[oddjobold]

I picked one of these up a few months ago. I usually avoid built in batteries, but have been curiosity about a fury 2 multibrand for a long time. A cheap one came up on ent so I went for it.

I have to say I have been really surprised. The vapor quality is not top notch but acceptable. However this thing is tiny! I love the size, a true pocket vape. It also seems to Medicate really well. Battery life is okay for something so small.

I think I would recommend this to a newbie, and due to size alone is something I would want to keep in my collection.

Edit: forgot to say build quality is really nice with a strong metal shell.

 

[Vape_Or_Die420]

Anybody figured out how to replace the battery in this sucker??

 

[Vape_Or_Die420]

I know im like years late to the party but i finally picked up a POTV ONE with curved mini bubbler for $79.30 using promocode ONEFC15 for an additional 15% off the 20%off 420 discounts and got a free $10 gift card and tightvac container.

Hoping to go to some concerts this summer. Figured this would be perfect vape (at this price point) for stealth compared to my Dynavap.

 

[Vitolo]

I know im like years late to the party but i finally picked up a POTV ONE with curved mini bubbler for $79.30 using promocode ONEFC15 for an additional 15% off the 20%off 420 discounts and got a free $10 gift card and tightvac container.

The "One" is a stellar portable vaporizer, at a great price... with great features.
POTV is an awesome company that is generous and responsible!

 

[Mowgli2]

I know im like years late to the party but i finally picked up a POTV ONE with curved mini bubbler for $79.30 using promocode ONEFC15 for an additional 15% off the 20%off 420 discounts and got a free $10 gift card and tightvac container.

Anyone know if this is still working? ONEFC15 didn’t work for me. Told me to enter a valid code.
Does the colour of the One matter? Or the accessory you choose? Maybe because I’m in Canada?
Also, potv only does a FC discount for the One, correct?

 

[jeffp]

Some observations after acquiring and using a One for about one week or less.
Heat up time is fast - several seconds.
Very good hits, comfortable and fulsome.
Very impressed with both the standard and glass stem mouthpiece.
It bummed me out that the accessory attachment is in my case extremely difficult to remove.
Mike from customer service was fast to respond and suggested I use something like the handle end of a metal spoon to pull out the attachment from the inside until it loosens up on its own - a brilliant and simple solution. You have a customer for life.
This is one of the only digital non handcrafted type vapes that I own and I think it's great!
The aluminum bowl has depth to it so a bowl will go on for awhile...also I think the choice of aluminum plays a part in the rapid heating.
The ABV is NEVER charred or burned. I set my temp at around the 400F mark. In fact the ABV is perfectly consistent and nice dark brown.
Weirdly it doesn't seem necessary to stir....
Perhaps best of all I love the vibrating Haptic feedback along with the simplicity of the setup.
To use after loading simply click the power button 3x fast to turn on and set the temp up or down with the two smaller buttons.
It's a session vape so it shuts off after about 4 minutes of use. But to turn it off mid session just click the power button 3x fast again.
Within seconds the unit will vibrate in your hand telling you that it's ready to use at the desired temp.
Perfect for outdoor use, it's incredibly discreet and with the standard mouthpiece the unit fits inside your palm essentially.
So it's just as discreet as the MFLB maybe even more so because you're not pushing a battery into the side of it.
Battery life is acceptable. I get about 5 or 6 bowls per charge. Not sure if I should do this but I like a full charge before a session so I tend to charge the unit to full even if it's at half.

My favorite use of the One is while sitting with the guitar at a sheet music stand. Every once in a while I'll stop, take a few hits, put it down and continue. I love it.

Not only is this a great portable it's also almost a perfect gift in the $100 range IF ONLY the issue of, in my case, the attachment accessory being extremely difficult to remove was resolved. Hopefully if there's an updated "ONE.2" it will be. As is it's close to perfect.

I ordered a bong adapter and mini bubbler so in a few days when it's here I'll have some fun taking the One in different directions.

 

[Vitolo]

Not sure if I should do this but

I do not think this is bad. Batteries have improved, and do not suffer the same limitations of those from the past.
I am the same. I charge more often than needed, but the battery life on all f my tools is marvelous.

 

[jeffp]

Continuing to use only this vaporizer, yet I have a substantial collection of options having been into this VAS hobby for over a decade, maybe more.
The two other portables that I really love are the MFLB and MVT.
I have the bong adapter, the mini bubbler attachment (a must) and the curved glass stem but I find the standard mouthpiece perfect and therefore acceptable.
Conceivably, I could one day own a second "One" and box up the rest of my vaporizers and always have one at the ready while the other's charging. I won't do that but it's conceivable. An impossibility.

 

[jeffp]

OK question: just about every time I open the accessory attachment or mouthpiece to reload, the gasket that holds the screen is dislodged, resting on top of the aluminum bowl, even though it presses in place when inserted. It's not a real issue, it doesn't seem to have any effect one way or the other, but is this a known thing - should more force be applied to lock the gasket more firmly and is that even possible? thanks...

 

[Vape_Or_Die420]

OK question: just about every time I open the accessory attachment or mouthpiece to reload, the gasket that holds the screen is dislodged, resting on top of the aluminum bowl, even though it presses in place when inserted. It's not a real issue, it doesn't seem to have any effect one way or the other, but is this a known thing - should more force be applied to lock the gasket more firmly and is that even possible? thanks...

Maybe try cleaning the unit and accessories with iso. Could be getting sticky? I've not had this issue.

 

[Vitolo]

If you mean the blue gasket, I wiggle it a little as I apply pressure and I feel it wedge nicely in place.
There should be a spare gasket in the box... did you try that one?

 

[jeffp]

If you mean the blue gasket, I wiggle it a little as I apply pressure and I feel it wedge nicely in place.
There should be a spare gasket in the box... did you try that one?

Right, that's exactly how I do it, it's almost a click. It's the same experience with all three gaskets. Me thinks cleaning with ISO should remedy.
Thank you. By the way I find an easy way to clean the gasket and screen is to fill a simple bottle cap with ISO and just drop it in and let it soak for an hour. I keep three bottle caps with my "One" stuff.

 

[Vitolo]

I use Iso, but I actually take the screen out and clean it alone.
I wipe the silicone down with iso, but rinse it pretty quickly after that.
This is my attempt to not expose the silicone to any potential degradation.
Your system sounds more direct and easy, without a doubt!

 

[jeffp]

my system is not as exacting as yours but it gets the job done.
at some point yes i think ISO will cause some degree of degradation.
removing the screen and cleaning it separately is obviously a more thorough cleaning, which can also be achieved by letting the screen and blue gasket soak in the same cap of ISO but separately. I think I will do that next go round.

by the way problem solved - a first ever thorough cleaning of this unit.
considering i've been using this day and night for the past three weeks it was due.
gasket is snug and secure.

thank you.

 

[jeffp]

here's a short vid of the "one" connected to my cheap awesome bubbler

 

[Vitolo]

Nice vid!

 

[jeffp]

Nice vid!

Thanks Vito. Here's one I just threw together using the mini bubbler attachment.

a little water splashed in my throat as it was slightly overfilled but i pulled it off without gagging.

 

[Vitolo]

but i pulled it off without gagging.

You fooled me.. your performance was seemless!