• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Super Surfer Vaporizer

NuMbNutZ

Well-Known Member
I’ve been using my Sup with glass balls, thanks to Troy from 420 Vapezone. What a game changer! I loved my Sup, but now it’s easily the best vape in my collection, hard to imagine anything better. The trick is actually dialing down the heat so it doesn’t scorch, whereas before I had a hard time getting it to extract enough without cranking the dial to 11. I really appreciate how I can load up the wand with any amount I want and get a thick, satisfying cloud of terpy vapor, essentially extracting everything out of the bowl in one lung buster. Fabulous!
 

lazylathe

Almost there...
@NuMbNutZ

I use my Super at Noon and it is an absolute beast without any balls.
White walls my large tube with ease.
Tried the balls but it was not to my liking but may try again.
 
lazylathe,
  • Like
Reactions: Alexis

NuMbNutZ

Well-Known Member
@NuMbNutZ

I use my Super at Noon and it is an absolute beast without any balls.
White walls my large tube with ease.
Tried the balls but it was not to my liking but may try again.
Without balls, I was also milking my glass around noon, but I was loading tons of the icky sticky, and it was devouring my stash. I like how some call it the wood chipper, anyway the balls allow me to get the same or better results with much less weed and the temp dialed back a little.
 
NuMbNutZ,

lazylathe

Almost there...
@NuMbNutZ

Just for you! This was around 11AM on the dial, you can see the large white knob is angled towards the camera and I tried to show you the bud just covered the screen. It was around a 2mm thick pinch.
It still has another hit or two left in it.
Maybe your unit needs to be calibrated? My Silver Surfer worked exactly the same way.

 

NuMbNutZ

Well-Known Member
Milky! Looks legit, t
@NuMbNutZ

Just for you! This was around 11AM on the dial, you can see the large white knob is angled towards the camera and I tried to show you the bud just covered the screen. It was around a 2mm thick pinch.
It still has another hit or two left in it.
Maybe your unit needs to be calibrated? My Silver Surfer worked exactly the same way.

looks milky! I can see why it’s dialed in to exactly where you want it
 
NuMbNutZ,
  • Like
Reactions: lazylathe

Stu

Maconheiro
Staff member
Last edited by a moderator:
Stu,
I’m very confused. Is this where you are supposed to post now? I just got my first plug in and it’s this vape. Was looking for tips and tricks others with more experience have. I’ve never used this kind before and it’s very different from portables...I need to spend some time with it.
 
Lavendersage,

lazylathe

Almost there...
20200820-210530.jpg
 
@NuMbNutZ

Just for you! This was around 11AM on the dial, you can see the large white knob is angled towards the camera and I tried to show you the bud just covered the screen. It was around a 2mm thick pinch.
It still has another hit or two left in it.
Maybe your unit needs to be calibrated? My Silver Surfer worked exactly the same way.

I see these so often and think I must be the only one too lazy to hold it. I guess it conserves material just holding it to the heat when using. I can also see why the ball thing works so well for some people especially when used that way which is probably the more intended way lol.
 
Has anyone tried a vapor tamer with their Sup? It looks big but not bigger than my usual piece. I was thinking I could use that instead...??
 
Lavendersage,

rabidnz

Well-Known Member
has anyone tried to upgrade the fan or convert it to a pump like the volcano? this thing is pretty slow to fill a bag in comparison.
 
rabidnz,
Started trying to use the bags again since I’ve had the device a little while and all the way down (just the dial clicked on) it turns the material black almost/possibly combusting. Anyone else have this problem? When I first got it I was burning every load so I stopped and thought I needed to spend more time with the device but it’s still a problem.
 
Lavendersage,
  • Like
Reactions: FractaLSD

rabidnz

Well-Known Member
Hi lavender you can tune the surfer by removing the heater cover and pushing the white heating rod down further into the base. When I have mind level to the top of the spike in the cover, I found it hotspotting alot and flavour suffered. After doing the ball mod it was even worse due to the extra power and now I've got it set quite far down ie tip of the heater at the base of the spike. PSA the ball mod will take away the ability to use fan and bags .
 
rabidnz,
Hi lavender you can tune the surfer by removing the heater cover and pushing the white heating rod down further into the base. When I have mind level to the top of the spike in the cover, I found it hotspotting alot and flavour suffered. After doing the ball mod it was even worse due to the extra power and now I've got it set quite far down ie tip of the heater at the base of the spike. PSA the ball mod will take away the ability to use fan and bags .
Thank you so much!! I’m not planning the ball mode just now decided to wait but adjusting the post sounds like something I can do. Any chance you might know why my heater cover won’t stay still anymore? I’m being easy, moved closer to the device etc. now when I use the “hands free” thing the weight of the wand pulls the heater cover off, and it moves when I use it with a whip. I’m determined to make this thing I spent all this money on work for me!! Thanks for any help you can give!
 
Lavendersage,

howie105

Well-Known Member
I use a couple of high temp O-rings to tighten up the heater covers grip on the base.
 
howie105,

howie105

Well-Known Member
Just so happens Amazon still has some on sale. ;)
MaterialSilicone
Inside Diameter0.36 Inches
Item Diameter0.5 Inches
BrandSterling Seal & Supply, Inc. (STCC)
ColorRed
 
Just so happens Amazon still has some on sale. ;)
MaterialSilicone
Inside Diameter0.36 Inches
Item Diameter0.5 Inches
BrandSterling Seal & Supply, Inc. (STCC)
ColorRed
Now my dumb blonde self has to find them. Then add them to my already full Amazon cart. I feel like if in less than 6 months with normal use, it needs orings then Elev8 should provide them for over $300!! This sucks and I need some things to not suck right now 😂! Any chance you have a link or is that not allowed?

Hi lavender you can tune the surfer by removing the heater cover and pushing the white heating rod down further into the base. When I have mind level to the top of the spike in the cover, I found it hotspotting alot and flavour suffered. After doing the ball mod it was even worse due to the extra power and now I've got it set quite far down ie tip of the heater at the base of the spike. PSA the ball mod will take away the ability to use fan and bags .
Unmodded I’m having trouble with the bags. All I do is click unit on (and no more) then fan on about midway and within 3 tiny one man bags the material is burned and not tasty. I was told bags were the way to go for flavor but maybe that’s misinfo? I’m gonna try moving the rod maybe that will do it!
 
Lavendersage,

howie105

Well-Known Member
Any chance you have a link or is that not allowed? .... I got faith you can find them.
 
howie105,

Gnome34

Well-Known Member
@ShayWhiteGrow I have the same design on my SSV but my unit has all three knobs on the front of the base, none on the verticle portion. I am completely infatuated with this one and wish I had picked one up sooner. Will be getting another unit, I emailed 7th floor today to inquire about Super Surfers with colored bodies rather than the standard silver. I'm hoping for a black on black unit!

This vape is my end game. Finally after thousands of dollars and countless hours researching etc....This is the one for me. I absolutely love the bags from this device, it has shelved out volcano hybrid with obsidian. I did not think that was possible.

Cannot say enough good things about it. I installed the heater enhancement 7th floor sells this morning and was able to drop my heat dial by about 3 "hours" while maintaining performance! In the end we will have one in the living room, my gaming room, and our bedroom. Cannot go without it!

Hopefully the vape mail ban gets fixed so I can thin my herd and sell off my other desktops!
 
My knob has some play in it I thought it might be the cover but it looks like it’s the tiny washer or whatever that’s behind the actual knob. Anyone know how to tighten that tiny thing?
 
Lavendersage,
  • Like
Reactions: arb

arb

Semi shaved ape
I
My knob has some play in it I thought it might be the cover but it looks like it’s the tiny washer or whatever that’s behind the actual knob. Anyone know how to tighten that tiny thing?
A small pair of needle nose pliers is what we use.
 
arb,
Top Bottom