1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

E-Nano from Epicvape

Discussion in 'Plug-in Vaporizers' started by ACE OF VAPE, Dec 7, 2012.

  1. UnevenPizza

    UnevenPizza I dream of Pizza

    Messages:
    330
    Location:
    Mount Improbable
    Yeah, when I dabbed with cotton, I would stir the load after the first hit or two, to get it spread around the cotton, increase surface area and boom, milk city!
     
  2. BabyFacedFinster

    BabyFacedFinster Capo di tutt'i capi

    Messages:
    1,161
    Does it ever! I did it again yesterday. After adding the oil, I work it into the cotton like pulling taffy. Only this is "special" taffy.
     
  3. Rollingstoned

    Rollingstoned Well-Known Member

    Messages:
    166
    Location:
    Socal
    Ready to pull the trigger, $185 shipped on Epicvape website..
    Still looking at differences between the enano and underdog
    Can i pack more then .1 or is that maximum capacity
     
    Vapor_Eyes and BigJr48 like this.
  4. Hackerman

    Hackerman Unspecified

    Messages:
    1,074
    Location:
    Out there
    You can pack as much as you want in the E-Nano stems with the adjustable screens. Fixed glass screens are not as flexible.
     
  5. BigJr48

    BigJr48 Well-Known Member

    Messages:
    726
    Location:
    New York, N.Y.
    First "get the strap" then pull the trigger!!!
     
    Rollingstoned likes this.
  6. Rollingstoned

    Rollingstoned Well-Known Member

    Messages:
    166
    Location:
    Socal
    How long do these units last? Will i have any problems if i buy used? Its a 3 year old unit, no warranty left
     
    BigJr48 likes this.
  7. Hackerman

    Hackerman Unspecified

    Messages:
    1,074
    Location:
    Out there
    If it's under $100 and you know the person, I might go used. Otherwise, I like new. Plus, you have your choice of mouthpieces if you buy new.
     
  8. howie105

    howie105 Well-Known Member

    Messages:
    1,529
    They are trucks and the few problems I have had have been either user fixable or cheap to fix by replacing the broken part. The wood split on mine and was fixable with some wood glue and hose clamps, then there was the rotary switch/cord combo that was easily replaceable. This list dosn't cover the broken glass which I consider a consumable. On the other hand the Nano is my daily driver so its taken more then its share of trips to the floor and years worth of up and down heating and cooling cycles. The only vapes I have that have lasted longer was are a couple of MFLBs and it takes a gun to kill one of those.
     
  9. BigJr48

    BigJr48 Well-Known Member

    Messages:
    726
    Location:
    New York, N.Y.
    Does it have the detachable plug? If so it needs to be upgraded and EpicVape will do it for you.
     
    Rollingstoned likes this.
  10. Rollingstoned

    Rollingstoned Well-Known Member

    Messages:
    166
    Location:
    Socal
    There selling for $130-150 used so its only $50 cheaper then new
    I might go new just so i know it will be reliable for years to come
    Having a bit of VAS issue and trying to save as much as i can
    Also want a portside undction heater lol
     
    SloJimFizz, BigJr48 and Vapor_Eyes like this.
  11. BigJr48

    BigJr48 Well-Known Member

    Messages:
    726
    Location:
    New York, N.Y.
    For the price, I would buy new. To spare yourself of any worries, a few bucks more buy new & with warranty.
    *Don't forget to add the adjustable stems and gong.
     
    Vapor_Eyes likes this.
  12. BabyFacedFinster

    BabyFacedFinster Capo di tutt'i capi

    Messages:
    1,161
    The thing is, these things hold their value, but I like to have a warranty with anything. I tend to not buy used cars for the same reason. If it was me (and it's not), it would have to be a very good deal to not just spend the extra bucks and get the warranty with all new parts. Oops, just realized that @BigJr48 already told you that. I would also pick up a pack of basket screens and maybe a spare cord. FCLOVE code will still provide free shipping I beleive.

    Just vaped some Grapefruit through the nano with some freshly cleaned glass.

    This was kind of gross. I often forget and tend to change my bubbler water every few days. I forgot that I had left a window open in the room where I keep the bubbler. I packed a gong, had the nano on top and was just about to start bubbling away when when I looked through the glass at the perc within. There was a large moth that had flown into the mouthpiece, gotten caught and died in my bubbler. It was spread eagle dead, floating on top of the water. I almost fucking vaped that shit. :doh:

    Well, I scrubbed that fucker out with salt and iso and a bottle brush and rinsed with the hottest water my boiler could provide.
     
    Last edited: Jul 9, 2018
    Sparkpug, Whisper, Gray Area and 5 others like this.
  13. Vapor_Eyes

    Vapor_Eyes tripping off the beauty of it all

    Messages:
    1,969
    Location:
    On Demand Convection Land

    :suspicious:


    :puke:


    :rofl::rofl::rofl:
     
    Morty, BabyFacedFinster and BigJr48 like this.
  14. Morty

    Morty Well-Zoned Member

    Messages:
    878
    I had a friend in high school who smoked a bowl full of nothing but seeds while trippin' ballz...and a few dead rolly pollies on top. :science: The stench of that exhale was gnarly to say the least.
     
  15. SloJimFizz

    SloJimFizz Unknown Member

    Messages:
    899
    Location:
    Joe's Garage Jamming
    So tempted by the Walnut Standos finally back in stock. I like the new layout with the added E-pic slot and stem slots being on one side.
    Ground up my last Jack Herer nug for the weekend. :drool:
    Nano on 6.13 sitting in its old aluminum Stando telling me she wants a new Walnut one. :rant:

    :peace:
     
  16. Mr. Gweilo 420

    Mr. Gweilo 420 Dude

    Messages:
    2,163
    Location:
    The Far East
    Do it! :)
     
  17. SloJimFizz

    SloJimFizz Unknown Member

    Messages:
    899
    Location:
    Joe's Garage Jamming
    I'm weak. It has been done. :rockon:
    "I have nothing in walnut", was my final justification check.
    Had to add one of their stash containers to fill that stash hole. Can't have any unused holes laying around.
     
  18. Rollingstoned

    Rollingstoned Well-Known Member

    Messages:
    166
    Location:
    Socal
    Wanna sell the aluminum stand :brow:
     
    Vapor_Eyes, BigJr48 and SloJimFizz like this.
  19. hopla

    hopla Well-Known Member

    Messages:
    180
    Location:
    Italy
    Are there any compatibility with other stems, can we use an Arizer Solo stem or of another brand with the E Nano?
    The idea would be to try the Arizer bubble straw on the E Nano :mental:
     
  20. Wildeyedzan

    Wildeyedzan Well-Known Member

    Messages:
    101
    First desktop vape is the enano !!man does it hit hard with this og flower eye currently have. Would cold pressed coconut oil suffice on the wood ?there are a couple natural "holes " I would like to touch up on. Much love everyone ,this feels like a very informative and interesting website :D:love::razz::)
     
  21. howie105

    howie105 Well-Known Member

    Messages:
    1,529
    Directly, not that I know of. Sometimes you can use a Nano WPA and another stem in combination.
     
    Vapor_Eyes, BigJr48 and hopla like this.
  22. hopla

    hopla Well-Known Member

    Messages:
    180
    Location:
    Italy
    Thanks for the answer.
    I'm waiting for my e nano to clear the customs, meanwhile I try to see how I could experiment with it.
     
    UnevenPizza, Vapor_Eyes and BigJr48 like this.
  23. howie105

    howie105 Well-Known Member

    Messages:
    1,529
    For that extra length you could go with a whip and the Nano WPA. https://i.imgur.com/YC2VAtf.jpg
     
    Vapor_Eyes and hopla like this.
  24. hopla

    hopla Well-Known Member

    Messages:
    180
    Location:
    Italy
    i didn't think about a whip as I thought one of the big advantages of the e nano was its glass path.
    Good to know!
    I took the long stem option, so I am not worried about the heat, I was curious about a simpler way to add filtration than a bong (also on its way) and therefore I was looking for a potential compatibility with the Arizer bubbler.
    ;)
     
    arb, Vapor_Eyes and BigJr48 like this.
  25. Hackerman

    Hackerman Unspecified

    Messages:
    1,074
    Location:
    Out there
    You can also search your house for items to be used with the new E-Nano. I never hardly pick mine up and never ever for the bong. Got a nice.... cap, that takes all the work out of it. LOL

    [​IMG]
     

Support FC, visit our trusted friends and sponsors