herbivore21

Well-Known Member
Yup, the temp control will click into setting 0, which is completely off. Mine also has a dead zone at setting 5 so that when you turn it down to 5 from a higher setting, the knob will stop and stay on that setting reasonably firmly. Handy for leaving my Nano on setting 5 when not in use, I can do it by feel rather than looking at it :D

I should point out for international customers that if you are using a cheap and nasty stepdown transformer that does not isolate the 220/120v circuits, you may run the risk of damaging the transformer/Nano if you leave it plugged in and running long term. Many cheap 40-50w non-isolated stepdowns are clearly labelled 'not for continuous use'. Leaving the Nano on is the coolest feature about the machine, choose the right stepdown to make sure you don't miss out!

The warm up time on vapes is the one thing that can bother me compared to combusting. As an ex doobie toker who would generally smoke 2-3 joints at a time, my usage case demands constant, readily available tokes. The Nano delivers this perfectly :)

The fact that I had gone back to joints while I was waiting for my replacement Nano dimmer (til I got the Lotus, cheers again @canj00digit? ) made me really appreciate the Nano all the more. Ponying up for an ounce of bud every week for my ridiculous joint habit is just unsustainable! Can't believe I did it for so long!

:bigleaf:
:worms:
 

Tweak

T\/\/34|<
that would be very nice, specially macro zoomed :clap:;pd;

How is 90mm f/11 1:1 sound? ;) You can see the printed fake wood design on my nightstand.

2Omz3yy.jpg

Left is the thick pinch stem, middle is all glass stem, right is pinch stem


xqtfz2G.jpg

These are 18mm GonG. Thick is on the left, the right is the thin glass with thicker tip, like a squished end.

0Dd2DjH.jpg

Here you can see the difference better and the fat tip on the right. Looks like he is smiling too, :)
 
Hey guys - is it usually much of a wait between ordering and shipping? I had read that Epicvape ship very fast. I ordered on Wednesday evening and it is now Friday morning (my location, sorry) and my order is still pending. Is that normal or should I be concerned? Thanks in advance :)
 
Mr. Gweilo 420,
Hey guys - is it usually much of a wait between ordering and shipping? I had read that Epicvape ship very fast. I ordered on Wednesday evening and it is now Friday morning (my location, sorry) and my order is still pending. Is that normal or should I be concerned? Thanks in advance :)
I hope not. lol I ordered mine on Tuesday and it still says pending. Can't wait to get it.
 
MysticVaper,

Enchantre

Oil Painter
It depends. Mine took weeks --- but, it was custom :)

I don't think Epicvape has a large stock on hand... I think he's making them pretty much to order +1 (or similar), or does small batches at a time.

It will, however, be WELL WORTH the wait. :tup:
 

z9

Well-Known Member
Lead times can vary greatly from what I've seen. My first Nano took a day or two to ship, my second took 4 or 5 days because I wanted wood that wasn't in stock. I agree with the above post concerning the stock of ready-made units. @ACE OF VAPE has posted that he has a day job in addition to Epicvape.

There have been reported problems with the shipping status not updating after Andy ships an order - this could be the case here as well.
 

herbivore21

Well-Known Member
Hey guys - is it usually much of a wait between ordering and shipping? I had read that Epicvape ship very fast. I ordered on Wednesday evening and it is now Friday morning (my location, sorry) and my order is still pending. Is that normal or should I be concerned? Thanks in advance :)
You aren't in the US. You need to get express shipping to get super quick postage like I had mentioned in past posts. If your tracking number starts with LC, you bought standard shipping, to Australia (east coast) that would generally take 2-4 weeks due to customs/general slowness of standard mail. USPS First Class international is the slowest mail I have ever experienced lol

Andy gets things out quickly every time, you can bet your bottom dollar that he got it to USPS as quickly as possible ;)

Next time, enquire about express post, it costs a bit more, but so worth it for 3-5 business days to most major international regions.

Your excitement is justified man, I am loving the Nano paired with glass, it has successfully killed my combusting habit (which was a hard beast to take down!).
 

herbivore21

Well-Known Member
@ACE OF VAPE I only have 14mm as an option for the Adjustabowls. Are you out of 18mm?
My friend who bought one also had this issue, however I gave him a reducer so he can use the 14mm :)

Caligula, if it helps, having owned both, I didn't see a noticable difference in vapor quality/density/drag between 18mm adjustabowl or 14mm adjustabowl with 18-14 reducer.
 
@herbivore21 - cheers mate. I knew I had read about that somewhere but forgot it was you. I have just fired off a message to Epicvape enquiring about the faster shipping. Like you I think it is well worth spending the few extra bucks. Hopefully by next weekend I will have it. I'm hoping to find some China glass left with my doorman when I get home today to tide me over :)
 
@1_gr8_underdog - thanks man :) I'm super excited to be honest. Dealing with the Infinity fiasco recently has really got me craving a more organic/natural/simple vaporizer. Plus I'm a cloud chaser and from all reports the e-Nanos can bring them. I've been eyeing one for a while too. Actually, I tried to purchase an UD about a year ago but they will not ship internationally. You know sometimes after making a purchase you feel slightly remorseful but I'm very happy I pulled the trigger on this one.
 

herbivore21

Well-Known Member
@herbivore21 - cheers mate. I knew I had read about that somewhere but forgot it was you. I have just fired off a message to Epicvape enquiring about the faster shipping. Like you I think it is well worth spending the few extra bucks. Hopefully by next weekend I will have it. I'm hoping to find some China glass left with my doorman when I get home today to tide me over :)
The pleasure is all mine mate :) this forum has been beyond helpful for me, and no doubt saved me years of my life by allowing my to finally kill my combustion habit (which included tobacco mixed in joints, hated giving money to tobacco companies)!

My mate who ordered a Walnut E-Nano yesterday after seeing my Nano milk video just left after using my Nano and LW piece. He is already a proud Nano owner to be! He was considering buying a combustion slide for the China piece I recommended he start out with, but after tasting Nano vapor, I doubt he'll want to combust again :D

Edit: @Mr. Gweilo 420 , you won't be disappointed. I get bigger clouds off my Lotus/PNP AVB in the Nano than I get from either of those vapes with fresh buds!
 
@herbivore21 - yeah it is pretty amazing getting combustion out of your life. I'm really happy that you have found the right vapes to achieve that. I had become a chronic combuster before I quit. Smoking ridiculous amounts of bongs for too many years, always with tobacco. In fact I came to like the mj/tobacco mix so much I could not stand mj alone. How ridiculous is that? I also picked up smoking between 2007-2011 and was smoking a pack and a half a day before I stopped. I was also combusting nasty Nepalese hash with hot knives and a plastic bottle over my stove for a long while. Honestly, I had to either stop or accept an early death from cancer as my reward. So happy to find vapor and not to mention this forum. I have had some differences of opinions with the admins but as a resource it is unrivalled and profoundly valuable to people like us.
 

vakedcow

Gentle cow vaper and halloween kiddo
@herbivore21 - yeah it is pretty amazing getting combustion out of your life. I'm really happy that you have found the right vapes to achieve that. I had become a chronic combuster before I quit. Smoking ridiculous amounts of bongs for too many years, always with tobacco. In fact I came to like the mj/tobacco mix so much I could not stand mj alone. How ridiculous is that? I also picked up smoking between 2007-2011 and was smoking a pack and a half a day before I stopped. I was also combusting nasty Nepalese hash with hot knives and a plastic bottle over my stove for a long while. Honestly, I had to either stop or accept an early death from cancer as my reward. So happy to find vapor and not to mention this forum. I have had some differences of opinions with the admins but as a resource it is unrivalled and profoundly valuable to people like us.

hehe, don't we all come from nasty combustion habits, that the forum and it's discussed products helped us to leave that far behind us? :spliff:
I believe this is necessary to enjoy Vaping as much as we do ;)

I'm quite sure you will enjoy the Nano ! :2c:
:peace:
 

Caligula

Maximus
My friend who bought one also had this issue, however I gave him a reducer so he can use the 14mm :)

Caligula, if it helps, having owned both, I didn't see a noticable difference in vapor quality/density/drag between 18mm adjustabowl or 14mm adjustabowl with 18-14 reducer.

Its not about vapor production but rather my OCD and not wanting to use an adapter.
 
Lead times can vary greatly from what I've seen. My first Nano took a day or two to ship, my second took 4 or 5 days because I wanted wood that wasn't in stock. I agree with the above post concerning the stock of ready-made units. @ACE OF VAPE has posted that he has a day job in addition to Epicvape.

There have been reported problems with the shipping status not updating after Andy ships an order - this could be the case here as well.

Sure hope so. :rockon:
 
MysticVaper,
Top Bottom