E-Nano from Epickai

lazylathe

lazylathe

Almost there...
I will try and get some pics up of it tonight!
To me it looks like the holes are around 1mm in diameter.

I love being able to just throw the whole stem in alcohol to clean it and not have to brush out small screens!
 
lazylathe,
mlo4sho

mlo4sho

Well-Known Member
So far I'm loving the E-Nano. I've barely had a chance to use it as I've had so much stuff going on but the few times I've used it I have really enjoyed it. I get a nice amount of hits off my usual load and the flavor lasts longer than I am used to. I haven't had time to post a review or anything but my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!) For those of you using your own screens what size do you suggest for a good fit?
 
mlo4sho,
E

EveryDayAmnesiac

Well-Known Member
mlo4sho said:
my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!) For those of you using your own screens what size do you suggest for a good fit?
Click to expand...

Read back a bit and you'll find a few people who have had this problem, myself included. We were all using 3/8 screens. I believe kingofnull received a replacement GonG that corrected problem. I don't know if anyone else has received a replacement. I know I have not yet.
 
EveryDayAmnesiac,
  • Like
Reactions: philthy
lazylathe

lazylathe

Almost there...
This is what my glass screen looks like.
Perfect sized holes!
Sorry it's a bit dirty...

2013-05-01183037_zps8831c5e5.jpg
 
lazylathe,
  • Like
Reactions: Enchantre
C-weed

C-weed

Well-Known Member
EveryDayAmnesiac said:
Read back a bit and you'll find a few people who have had this problem, myself included. We were all using 3/8 screens. I believe kingofnull received a replacement GonG that corrected problem. I don't know if anyone else has received a replacement. I know I have not yet.
Click to expand...

same here...hoping Andy gets those all glass gongs in soon. He was out of stock, and replaced mine with the original version. i too have had many screen problems, and am hoping the new gong version will remedy that. seeing yours gives me hope....very excited.
 
C-weed,
Enchantre

Enchantre

Oil Painter
EDIT: Checked out my screen stem, and it is the new one with 5 tiny holes.

My hubby did inhale a bit of debris the first time he tried it... so I added the screen to it. That's working great.

I was thinking, though, after watching him learn how to use it, that another stem would be handy (in case of breakage....). :ninja:
 
Enchantre,
max

max

Out to lunch
my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!)
Click to expand...
If the 3/8" drops down easily and fits flush, it will move when you stir, but if you're careful you can still easily stir without displacing the added screen or letting herb get through. And after a bowl or two, the screen stays put pretty well once there's some stickiness. I prefer the loose fit myself, for easy placement and removal.

lazylathe said:
This is what my glass screen looks like.
Perfect sized holes!
Sorry it's a bit dirty...
Click to expand...
I don't have access to mine for comparison, but those holes look plenty big enough to pass small particles of ground bud. I'll stick with my added screen. Air flow is still very good.
 
max,
X

XGerpXDerpX

Well-Known Member
I have those flower/jack glass screens that work fine too in the ones that dont have built in glass screen, just need to try to not lose them, I just drop it in and leave it even if its crooked
 
XGerpXDerpX,
Enchantre

Enchantre

Oil Painter
Okay, I just had a whole, solid night's sleep!

I didn't even use my "sleep" herbs, just some chocolate chunk I had in the stem. Hubby and I sat and toked it down to caramel ABV (not unusual, just sayin'), then off to bed we went. I slept from 10 pm until 7 am!

I'm thinking that maybe the vape used affects the CBDs (and other endocannabidoids) released, both in range and in quantity. Maybe.

Whatever. I love my Nano. Totally.
 
Enchantre,
  • Like
Reactions: lazylathe
lazylathe

lazylathe

Almost there...
max said:
I don't have access to mine for comparison, but those holes look plenty big enough to pass small particles of ground bud. I'll stick with my added screen. Air flow is still very good.
Click to expand...

I do not grind my bud, just pull off a chuck and in it goes.
That way i eliminate the small particles.
One good thing about legally growing my own bud is i can decide on what %RH to store it in.
I keep it at about 65% so it is still moist and pliable, not dry and crumbly.
:D
 
I

Immortal

Herbalist
Man I can't wait for this thing to arrive. My last PD has become so unreliable I had to bust out the pipe after my workout today and combust. I feel like I'm in the dark ages man.
 
Immortal,
P

philthy

Member
ACE OF VAPE said:
Running about 4-10 DAYS shipping time right now depending on what type of wood, and options ordered.
Click to expand...
Andy, I ordered the two vape combo deal on the 22nd. Both of them are walnut. Are there any updates on when the combo deals will start shipping?
 
philthy,
  • Like
Reactions: Kief
nkotb

nkotb

Well-Known Member
philthy, I ordered 2 cherries and a walnut on the 23rd and it shipped on the 2nd. Hopefully we'll both be seeing packages soon. :cheers:
 
nkotb,
P

philthy

Member
nkotb said:
philthy, I ordered 2 cherries and a walnut on the 23rd and it shipped on the 2nd. Hopefully we'll both be seeing packages soon. :cheers:
Click to expand...
Did you get a tracking #? I didn't register an account when I bought the deal. I haven't received any e-mail update on processing or shipping besides getting an invoice and order number.
 
philthy,
I

Immortal

Herbalist
I got a tracking number. Mine shipped yesterday, I'm very excited (now I only have to resort to combustion for a few more days). It's always a good idea to create an account in case of things like this.
 
Immortal,
nkotb

nkotb

Well-Known Member
philthy said:
Did you get a tracking #? I didn't register an account when I bought the deal. I haven't received any e-mail update on processing or shipping besides getting an invoice and order number.
Click to expand...

I didn't register for an account when I ordered either, but my tracking number was emailed to me on the 1st.
 
nkotb,
P

philthy

Member
The 420 combo deal arrived late Saturday afternoon. I cannot seem to get the screen to fit in the glass stem. It would either bend and turn or it won't fit flush and fall out. Is there any advice on how to put the screen on?
 
philthy,
mlo4sho

mlo4sho

Well-Known Member
philthy said:
The 420 combo deal arrived late Saturday afternoon. I cannot seem to get the screen to fit in the glass stem. It would either bend and turn or it won't fit flush and fall out. Is there any advice on how to put the screen on?
Click to expand...
I'm having the same problem. Haven't had any luck with the included screens.
 
mlo4sho,
kingofnull

kingofnull

ace
I don't get why this is just now emerging as an issue. All my earlier Nano stems and gongs fit screens fine.
 
kingofnull,
You must log in or register to reply here.
Top Bottom