kokolokokolokon
Well-Known Member
Hello everybody! Since @vapormachina is very busy i´m creating this thread.
VapOS
The VapOS is an unregulated low cost butane vape, designed to bring vaporization to people who can´t afford it, or people who want a hard-to-break all-round vape. It is made of 316L SS and it doesn´t have any complex part.
It has 5 parts: The cap, the stem, the screen, the condenser, and the cooling unit. (And one o´ring).
The vapOS is easy to assemble: The cooling unit is inserted into the condenser, and the condenser is fitted with the O-ring. This assembly is inserted into the Stem, and at the top, the grid is inserted, which will rest on the S at the top of the cooling unit. Finally, we put the cap.
The price varies according to the version we buy. There are two main versions: the ball version, which many of you already know how it works, for 29€, and the screen version, for 33€. These only differ in the content of the cap, and it can be changed.
The device also comes with a brush, spare o´rings, and a mini silicon bong adapter.
--------
The ball version includes 2mm rubi balls, a couple of screens and a washer to keep them all in place. It is simple and clean, and it works like a TA or a Stunner. The VapOS includes 2mm balls because the walls are thick enough to avoid termal stress on the balls and keep them hot.
The screen version comes with screens (obviously) and washers, forming a screen matrix. The screens are thick, totally removable, customizable, and easy to clean. In my opinion, this version is more interesting, since we have seen many ball vaporizers. Besides, it's easier to clean.
It has different configurations:
The standard config alternates between a grid and a washer, being a basic configuration. I think this is the best configuration if you like DTL pufs with an open airflow.
But we can also use it without washers to increase the restriction in the airflow, and speed up the heating time a little. This version is good if you like to alternate between DTL and MTL pufs.
These are the 2 main configurations, but the user can make his own configs. For example: using 2 washers between screens to improve the airflow, or 2 screens between washers to reduce the airflow.
[it is advisable to use a couple of washer at the end of the config to separate the last screen a little from the rest. This avoid any hot spots, in case you have any]
---------------
The chamber is adjustable since you can move the condenser, but, in the standard position it can hold around 0,15g. The main profile is convection, but it can used as a hybrid vape since you just need to aim lower with the torch.
I can assure you that the vapor if this device is smooth as hell and it provides a great flavor as well. And it hits like a high end vape.
This is a butane vape, and it can be used with an IH too (you need a powerful IH like the Flare, which takes around 50-60 secs, or the Inductor) but @vapormachina has created an adapter to uise it with a 20mm PID coil. It is called:
The Crucible
As I said, the crucible is a PID coil adapter. It is made of Steel and the base is made of aluminium.
It is designed to leave the PID on for long periods of time (since it needs a few minutes to reach the temperature). Once hot, we can insert the vaporizer whenever we want and wait from 40 seconds to a minute until it is ready (les time for reheats).
We can also leave the cap inside the crucible to use it as a Log, always having the heating element ready.
The crucible also works with other vaporizers:
Vaponic, Anvil, Tempest, Pipe X, Dynavap (With armored cap) or vaphit. (I guess the simrell vape too).
I don´t know if the TA/Stunner can be use don it, but ther4e is another adapter head which hold devices with bigger diameter: Rockets, convector xl (i think it can hold the new supercapacitor cap), hyperdyn (with FMJ or THC), the Fusion 2, the Tornado, the Elev8r or any Dani device.
You can get the aluminium base of the Crucible for 19€ and each adapter head for 15€ (being 34€ if you don´t need both adapters).
--------------------------
Right now you can get it talking with @vapormachina on Telegram, Instagram or Twitter (I don´t know if he will be very active here…He has the same name on all social media) and it will be on Aliexpress too, to be easier to get on different countries.
VapOS
The VapOS is an unregulated low cost butane vape, designed to bring vaporization to people who can´t afford it, or people who want a hard-to-break all-round vape. It is made of 316L SS and it doesn´t have any complex part.
It has 5 parts: The cap, the stem, the screen, the condenser, and the cooling unit. (And one o´ring).
The vapOS is easy to assemble: The cooling unit is inserted into the condenser, and the condenser is fitted with the O-ring. This assembly is inserted into the Stem, and at the top, the grid is inserted, which will rest on the S at the top of the cooling unit. Finally, we put the cap.
The price varies according to the version we buy. There are two main versions: the ball version, which many of you already know how it works, for 29€, and the screen version, for 33€. These only differ in the content of the cap, and it can be changed.
The device also comes with a brush, spare o´rings, and a mini silicon bong adapter.
--------
The ball version includes 2mm rubi balls, a couple of screens and a washer to keep them all in place. It is simple and clean, and it works like a TA or a Stunner. The VapOS includes 2mm balls because the walls are thick enough to avoid termal stress on the balls and keep them hot.
The screen version comes with screens (obviously) and washers, forming a screen matrix. The screens are thick, totally removable, customizable, and easy to clean. In my opinion, this version is more interesting, since we have seen many ball vaporizers. Besides, it's easier to clean.
It has different configurations:
The standard config alternates between a grid and a washer, being a basic configuration. I think this is the best configuration if you like DTL pufs with an open airflow.
But we can also use it without washers to increase the restriction in the airflow, and speed up the heating time a little. This version is good if you like to alternate between DTL and MTL pufs.
These are the 2 main configurations, but the user can make his own configs. For example: using 2 washers between screens to improve the airflow, or 2 screens between washers to reduce the airflow.
[it is advisable to use a couple of washer at the end of the config to separate the last screen a little from the rest. This avoid any hot spots, in case you have any]
---------------
The chamber is adjustable since you can move the condenser, but, in the standard position it can hold around 0,15g. The main profile is convection, but it can used as a hybrid vape since you just need to aim lower with the torch.
I can assure you that the vapor if this device is smooth as hell and it provides a great flavor as well. And it hits like a high end vape.
This is a butane vape, and it can be used with an IH too (you need a powerful IH like the Flare, which takes around 50-60 secs, or the Inductor) but @vapormachina has created an adapter to uise it with a 20mm PID coil. It is called:
The Crucible
As I said, the crucible is a PID coil adapter. It is made of Steel and the base is made of aluminium.
It is designed to leave the PID on for long periods of time (since it needs a few minutes to reach the temperature). Once hot, we can insert the vaporizer whenever we want and wait from 40 seconds to a minute until it is ready (les time for reheats).
We can also leave the cap inside the crucible to use it as a Log, always having the heating element ready.
The crucible also works with other vaporizers:
Vaponic, Anvil, Tempest, Pipe X, Dynavap (With armored cap) or vaphit. (I guess the simrell vape too).
I don´t know if the TA/Stunner can be use don it, but ther4e is another adapter head which hold devices with bigger diameter: Rockets, convector xl (i think it can hold the new supercapacitor cap), hyperdyn (with FMJ or THC), the Fusion 2, the Tornado, the Elev8r or any Dani device.
You can get the aluminium base of the Crucible for 19€ and each adapter head for 15€ (being 34€ if you don´t need both adapters).
--------------------------
Right now you can get it talking with @vapormachina on Telegram, Instagram or Twitter (I don´t know if he will be very active here…He has the same name on all social media) and it will be on Aliexpress too, to be easier to get on different countries.
Price summary:- -VapOS with balls: 29€
- -VapOS with screens: 33€
- -Screen pack: 12€
- -Crucible Aluminium Base: 19€
- -Crucible Standard adapter: 15€
- -Crucible Bigger adapter: 15€
). In the video you can see the different parts, configs, etc…
"Sit and chill with VapOs.... or beat someone senseless! Your choice!"
)
)
