Collyland Aromatizer (formerly Vapbong by Art of Vapor)

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah that is just like one of those ceramic toothbrush pen holders...

Someone somewhere on here posted that a roll of electrical tape is the perfect size to sit the bowl in.

I'm planning on putting a roll of electrical tape right there on the table and that's where the bowl goes. I might dress it up and make it look prettier.

Anyhoo - thanks for the tip, whoever posted that!

That was @bornfree13

Electrical tape? I wouldn't risk my hot bowl on a roll of electrical tape, surely there are better solutions than that. I like the coconut bowl idea, maybe a wood turner should knock up a few bowl holders for this.

My bowl never gets anywhere near that warm in my use...

I also have no problem placing the bowl on the table, using the flat side, when it is right side up, so it is a useless accessory for me honestly!
 

notams

toke down Babylon
@Shit Snacks I don't have mine yet. So, please excuse any ignorance.

If I'm sitting down and doing a session where my intent is to 'finish' the bowl and my carb hole is plugged, are the steps as follows: inhale with the ball firmly in place and remove the ball to clear the chamber, exhale, rest ball on table, then reinsert just before my next toke? Or do I let the ball rest in position and have the device sitting and waiting for a hit?

I guess my question is: Is the ball only in position while you are actively toking? So, it's only in position for a few seconds at a time? It'll spend 99.9% of its life off the bong?

I guess I should add, I plan on leaving it plugged in 24/7.
 

NimChimpsky

Well-Known Member
I wouldnt put the oven nut on while it's heating up because it will get pretty hot. But as @Shit Snacks said, it doesn't really get that hot otherwise.

I keep mine off if it's not loaded. Then once I load a bowl, I will rip it, pull it off slightly to clear, then set it back on there for a 2nd hit (even if that hit is a few mins later). I usually do 2 hits and then take it off to stir. Rinse, repeat.

Edit: I'm sure we all have slightly different rituals, you will have fun experimenting with it and finding how you best like to use it. Making sure the ball is in place securely is the biggest thing and once you do it a few times it will become 2nd nature.
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
@Shit Snacks I don't have mine yet. So, please excuse any ignorance.

If I'm sitting down and doing a session where my intent is to 'finish' the bowl and my carb hole is plugged, are the steps as follows: inhale with the ball firmly in place and remove the ball to clear the chamber, exhale, rest ball on table, then reinsert just before my next toke? Or do I let the ball rest in position and have the device sitting and waiting for a hit?

I guess my question is: Is the ball only in position while you are actively toking? So, it's only in position for a few seconds at a time? It'll spend 99.9% of its life off the bong?

I guess I should add, I plan on leaving it plugged in 24/7.

What you described is correct that is how I use it, except when I take it off after finishing a hit, I will stir the bowl before setting it on the table. Easier to do while it is still warm, and that way when I want my next hit, I just pick up the bowl and put it back on. I do not leave the bowl sitting on the bong at all unless I am about to take a hit and get distracted, don't want vapor in heater ball.
 

Jaxel

Well-Known Member
Manufacturer
Thank you, I must admit I honestly didn't know single-egg holders actually existed and had a purpose up until 15 minutes ago lol

But yes I think the team over at AoV could definitely work something similar into their product line, include as a option to add on with orders and such / offer them individually in the store, like the loading trays.

Definitely matching glazes to the bodies would be awesome, make it stable and I think there are more than a few people who would be interested in them, especially considering whats involved if you do happen to need a new ball.

@Jaxel what would you think?
We know what you mean😀 so we had this idea as well. So many ideas and so little time😂 we will see what we can do in the future😆
 

Cheebsy

Microbe minion
Thanks @Shit Snacks , I don't have one of these, yet. I am familiar with electrical tape and even at room temp it's sticky on the sides, I now understand @notams was just referring to the core... I should have realised tbh lol.

I've not seen mention of anyone worried about their "balls" rolling off the table until the last few pages, just postulating a possible accessory... We all love our accessories. 🤣
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Same, my ocd makes me a big proponent of the "stir and debowl while still warm" philosophy lol. I always debowl and give it a good blow clean immediately when I've finished

Oh yeah absolutely always empty the bowl warm, but I will admit occasionally I do not stir right after, because some of the hits are so large and distracting themselves!

Thanks @Shit Snacks , I don't have one of these, yet. I am familiar with electrical tape and even at room temp it's sticky on the sides, I now understand @notams was just referring to the core... I should have realised tbh lol.

I've not seen mention of anyone worried about their "balls" rolling off the table until the last few pages, just postulating a possible accessory... We all love our accessories. 🤣

Haha yeah @bornfree13 had mentioned it early on, and it certainly can happen... Also regarding the tape, if it is older tape then a lot of dust could end up covering the stickiness on the sides, or if it is a roll that is worn down not too fresh, or yeah the cardboard inner tube... but yes this was not something I ever really wanted to do myself, although one time the ball did roll from me and I was like okay I see the benefit now lol

No accessories are fun, but I think I enjoy seeing new vapes more!
 

Ripstar

Well-Known Member
I had a simple idea of making a avb poker bowl without the poker and incline. Waiting on my spoon carving tool to make the bowl. I don't see the ball as a huge concern though, not sure anything else is really that necessary as it's basically concrete. I get more worried when the VVPS cord gets stuck in my damn drawer and the main rig itself...
 

Philabrookla

@philabrookla
My obsidian VB classic is set to arrive tomorrow. I keep trying to let my anxiety be assuaged by thinking of hardened clay as concrete. I may get a few area rugs but that was on my radar before the VB (ok, maybe not). I also thought of slingin' some silicone bands around the sacred oven nut. What can I say I like being carefree!

I'm not worried about nabbing my second VB either, since I gaze at the website while I'm at work most mornings. Crackled glaze OaB, how am I gonna explain you to the missus?
 

BestBuds

The Dude
Man am I stoked to be joining the gang later this week!

I've rewatched the YouTube video by tools420 a bunch. Love it when he totally loses it and starts saying (in a fantastic impression of Dr Colly) "IT'S WOOORKING!"
I am stoked for you lot! I watched with my head in my arse as you all bought up the BF sale stock. Then by some crazy chance my second favorite color comes up and I get it before you guys. Unbelievable!

I hope someone does a first hit video. I love the eyes poppin when they exhale! "THIS IS A VAPE?!"
 

Summer

Long Island, NY
Thank you, I must admit I honestly didn't know single-egg holders actually existed and had a purpose up until 15 minutes ago lol

It's to hold lightly soft boiled eggs with the shell still on in upright position. You just remove the top of the shell so you can spoon out the liquid yolk & whites without the yolk running all over in a regular dish (think small Pyrex bowl) when breaking the yolk. It's both practical & genteel. Sorry for being OT.
 
Last edited:

BrianTL

Westchester, NY
Crackled glaze OaB, how am I gonna explain you to the missus?

I've been wondering the same thing lately... if you figure it out let me know

It's to hold lightly soft boiled eggs with the shell still on in upright position. You just remove the top of the shell so you can spoon out the liquid yolk & whites without the yolk running all over in a regular dish (think small Pyrex bowl) when breaking the yolk. It's both practical & genteel. Sorry for being OT.

Thanks for the explanation! I've never had an egg that way but I kind of want one now
 

SquirrelMaster

Well-Known Member
I think it's pretty cool there are so many VapBongs and VapBandits going out this week. I'm excited to see all the different glazes everyone has chosen! I have an Obsidian VabBandit (no carb) headed my way that's supposed to be here on Monday. Shipping to Canada is excellent for any potential Canadian buyers wondering. My current VapBong is going through a lot of flower in anticipation :leaf::freak::leaf:.

I had the most terpy hit of some Secret Cookies x Kush Mints #11 from my VapBong earlier when I loaded up the bowl (after some Wedding Crasher) and I couldn't resist a taste. I just came back to finish it as well as some CBD flower. I love how hard these hit and how wide open! Definitely changed my definition of a low draw resistance vape.

If I could own one desktop it would come from the hands of @Jaxel or one of the other Art of Vapour artists. There's a custom in my future for sure, I just have no idea what.
 

Legalize Weed in GERMANY

Drug War Veteran
My Tweety
tweety bird GIF
has landed and it's
WÖÖÖÖÖÖÖÖÖÖÖÖRKING.

Just used the same power settings as I use for the Vapbong(because I use the PWR supply from the Vapbong)
Bildschirmfoto vom 2021-02-03 15-58-50.pngFound something in the Kitchen for the sacred oven nut i think it is soapstone
but I will replace it with a Coconut bowl like the one for my VapbongBildschirmfoto vom 2021-02-03 15-59-58.png
Bildschirmfoto vom 2021-02-03 16-00-45.png
 

notams

toke down Babylon
@Legalize Weed in GERMANY DUDE! Your Tweety, love it.

Someone mentioned just cradling the warm ball in your hand like a cup of tea. I'm getting all gooey just thinking about it.

@SquirrelMaster funny you went with kush mint. That's the EXACT same strain I just got a text from my dispo last night that it's back in stock at $135 / oz. Looks like I'm about to spent $270.
 

BestBuds

The Dude
Someone mentioned just cradling the warm ball in your hand like a cup of tea.
Much like the enano and log vapes in general, that's one of my favorite parts. It's like holding a nice warm cup of spiked cocoa.

I just got back from the dispensary about a hour ago. I blew my back out moving a ladder in preparation for the big north american, east half, great snow storm :lol: on Monday. I've been in massive pain with only tylenol. I just finished 2 hits with the VB and I feel so much better. Finally some relief! :myday:
 
Top Bottom