HOW TO: Make hand-rubbed black hash using only ABV and vape oil

Blazr

New Member
First off, mods, if this is in the wrong section please move it, thanks.

I've seen plenty of tutorials online about making hash from your vaporizers remains, but I've yet to find any that produces this kind of hash. To start off, here is a picture of the end product:

1fbyf7.jpg

epn0qr.jpg



(note I will update this picture soon, this was one of my first tries and it has too much plant material in it, normally this hash is much shinier and squishier!)

This hash is top quality, it would be impossible for someone to know it was made with vape remains. Its much easier to handle than any other hash I've seen people make from vape remains and is also by far the best tasting IMO. It is extremely malleable and squishy, dark black in colour, and gives the most amazing body high. Results may vary however, but some of my previous batches of this have been comparable to Charas in quality, but note that mine is made from the remains of some VERY HIGH quality weed ;)

Also, note that you will of course yield MUCH MORE than is in the photo, this is a picture of my left-overs after I smoked most of it. Yield does vary a lot however, making this kind of hash is a skill, but you will not be disappointed by the yield.

Things you will need:
Vaporized weed (you only need a small amount, less than a gram usually)
Vape oil (this is the amber coloured build-up you find in your vaporizer)
Flat-head screw-driver

There you go guys, as you can see you don't need to buy any special ingredients to make this hash, however, I will warn you that making this hash is much more tedious than other methods.

NOTE: I use an Extreme Q vaporizer, I haven't tried this tutorial using other types of vapes, but please let me know how it turned out if you do! I will also be updating this thread with pictures once I make another batch of this, and of course will add more detailed instructions + my tips and tricks!

Grind your ABV:
Use only the remains of buds, don't use any stems or leaves for this as the hash won't be as squishy.
Grind your ABV into a fine powder, the finer the better, I find an easy way to do this is to grind it in a grinder, and then take small amounts and break it up even more using your fingers over a sheet of paper.

Get your vape oil:
Use your flat-head screw driver to collect a small amount of vape oil from your vaporizer (enough to cover the head of the screwdriver).

Rub your hash:
Dip the head of the screwdriver into your ABV powder. A small amount of ABV will stick to it. Now place your index finger and thumb on the top of the screwdriver and pull off the ABV & oil mixture, rub it in between your finger and thumb slowly for a few minutes, once it begins to solidify into squishy hash, leave it on a sheet of paper, get more vape-oil and ABV and repeat.

Finishing up making your hash:
Once you've used up about half of your oil, pick up the pieces of hash and rub them together in your hands, continue rubbing and applying vape-oil to this. Try to make the individual pieces stick together. The more oil you use the more malleable and sticky the hash will become.

Eventually you will be left with a single, nodge of hash that is ready for smoking, enjoy!

For vaping this hash, I recommend elbow packing a small bit of weed and placing the hash on top, it makes the bowl last extremely long and has a very nice taste this way, 220c-260c is the temperature range I recommend.

For smoking in a joint, I recommend you roll the hash into a "snake" and put it on top of weed in a joint (or use tobacco if you smoke tobacco spliffs).

That's it guys, it normally takes me an hour to make a batch, yield varies a lot and mainly depends on the amount of oil you have, I usually make a batch after I smoke 4g threw my vape and usually get enough hash to last me 1-2 days. This tutorial will only use up a tiny bit of ABV as well, so I would recommend doing an ISO/BHO extraction with the rest, or better yet, use it to make cannabutter.

Hope you guys enjoy it!
 

Greenscreen

Well-Known Member
I have friends who own extreme Q's who are into something similar - Although most of them mix their kief instead of ABV, and maybe a bit of fresh green but usually just a lot of crystals!
They have some great results though i know that!
Will try and post pics at some stage
 
Greenscreen,

goatgobaahh

Well-Known Member
Epic first post brother I actually have been collecting my abv and oil for over a year not knowing what to do with it :leaf:
 

Strapic

New Member
Very clever!:clap: Here's what I do with my reclaim oil: First Ill load maybe 1/4 bowl of pure ashes into a water pipe. then i get whatever i am going to be collecting reclaim from and exhale through it slowly for a few seconds.(this makes scraping way easier) after that I scrape a dabs-worth with a straightened paperclip, and drop it into the bed of ash. Now you can toke when ready! the second you hit the oil with a flame it will cherry all on its own. Its really just a clever way of taking dabs with a bong.

I have only tried this with a honeycomb style bowl. Not sure how it will work with a regular bowl but it's certainly worth a try!
 
Strapic,
  • Like
Reactions: Blazr

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
ABV reclaim hash... interesting. Dunno about using this stuff myself but I'm sure a few people here will welcome new methods. Basically mixing reclaim and ABV... perhaps mixed in with some coconut oil and soy lethicin, then into capsules...
 

Blazr

New Member
I have friends who own extreme Q's who are into something similar - Although most of them mix their kief instead of ABV, and maybe a bit of fresh green but usually just a lot of crystals!
They have some great results though i know that!
Will try and post pics at some stage

Yes! definately if you have kief, use that instead of ABV, not only is it finer, which will make the end product less crumbly, it will also add to the potency.

Epic first post brother I actually have been collecting my abv and oil for over a year not knowing what to do with it :leaf:

:o A YEAR's worth of oil? Can I be your best friend? :lol:

Enjoy it dude!

Very clever!:clap: Here's what I do with my reclaim oil: First Ill load maybe 1/4 bowl of pure ashes into a water pipe. then i get whatever i am going to be collecting reclaim from and exhale through it slowly for a few seconds.(this makes scraping way easier) after that I scrape a dabs-worth with a straightened paperclip, and drop it into the bed of ash. Now you can toke when ready! the second you hit the oil with a flame it will cherry all on its own. Its really just a clever way of taking dabs with a bong.

I have only tried this with a honeycomb style bowl. Not sure how it will work with a regular bowl but it's certainly worth a try!

Nice idea, I actually used to do something similar with my oil, I would just put a tiny bit on top of some weed in a bowl, it would make the bowl last much longer, was great.

I also exhale into whatever I'm collecting my oil from, it definitely makes scraping easier. Another handy trick is if you're making my hash, pour some ABV into it and shake it around, then pour out the excess ABV, some of the ABV will get stuck to the oil and you can scrap both off together, speeds things up alot.

ABV reclaim hash... interesting. Dunno about using this stuff myself but I'm sure a few people here will welcome new methods. Basically mixing reclaim and ABV... perhaps mixed in with some coconut oil and soy lethicin, then into capsules...

Capsules are definitely a cool idea, but I would definitely recommend smoking this stuff, you would think it would be disgusting, but there is only a small amount of ABV in it, there is only a very slight taste of the oil (which I actually love the taste of) when you smoke it and no taste from the ABV.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
The reason I am averse to vaping this is because of the dead skin cells and bodily oils excreted by the hands. My vaporizing needs are a bit more... delicate, one could say. It hadn't occured to me to use both ABV and reclaim together until your post, I just have to change some of it up to benefit my more specific needs. ABV and reclaim in one is a new idea to me which I will definitely be testing.
 
Quetzalcoatl,
  • Like
Reactions: Buildozer

Buildozer

Baked & Fried
The reason I am averse to vaping this is because of the dead skin cells and bodily oils excreted by the hands. My vaporizing needs are a bit more... delicate, one could say. It hadn't occured to me to use both ABV and reclaim together until your post, I just have to change some of it up to benefit my more specific needs. ABV and reclaim in one is a new idea to me which I will definitely be testing.
same here.... good post Blazr, i never probably would mixed them ever hah.
and never would have thought to make edibles w/ it.. it would be so easy.. it's perfect.
man if i had a years worth i would try to make a heavy tincture.
 

Buildozer

Baked & Fried
you just need some high proof alcohol.. like some bacardi 151 or some everclear.. if i was doing it... i would just dissolve it into just a little bit of alcohol and once it was dissolved in i would start using it ha.. if you put in avb too then you might wanna let it sit in a dark place for a week or 2 as you can help yourself ha.. and strain it.. just store it in a dark cool place. but when it comes to these little particles already stuck w/ the vapor resin, i personally wouldn't bother straining.. unless i was letting it sit for some weeks anyway.. but it should be ready to mix into any alcohol and fat and do its job..
since it should be active, i'm sure you can just eat plain vape resin.. mixing it would be better though because it would help your body process it more readily.. if you are gonna be eating a fatty/greasy meal and or having some drinks you can just eat it plain ~30 mins before or after the meal/drinks and it should work... after will take longer to kick in and last longer in my experience w/ edibles.

i have never thought to use vapor resin for anything.. i always dump it down the drain when i clean.. let me know if you eat it how ever you try it.. i'm gonna have to remember to start saving that stuff in a jar. i want to try eating it now ha. sounds perfect to me.

w/ vape resin i would just mix it in and use it.. check out what dorkus_malorkus said about a week ago about using BHO, in this tincture thread
 
Buildozer,
  • Like
Reactions: SSVUN~YAH

lazylathe

Almost there...
I place my AVB into 99% ISO and shake for 30 seconds.
Strain through a coffee filter and let the ISO evaporate.
Scrape the thick oil off the plate and store in a small dark bottle.

I also clean my glass in a jar of ISO, turns yellow from the oil.
I use this also to make the thick oil.

Add a bit to the herb and vape away, before you know it you are sky HIGH!
 
lazylathe,

goatgobaahh

Well-Known Member
you just need some high proof alcohol.. like some bacardi 151 or some everclear.. if i was doing it... i would just dissolve it into just a little bit of alcohol and once it was dissolved in i would start using it ha.. if you put in avb too then you might wanna let it sit in a dark place for a week or 2 as you can help yourself ha.. and strain it.. just store it in a dark cool place. but when it comes to these little particles already stuck w/ the vapor resin, i personally wouldn't bother straining.. unless i was letting it sit for some weeks anyway.. but it should be ready to mix into any alcohol and fat and do its job..
since it should be active, i'm sure you can just eat plain vape resin.. mixing it would be better though because it would help your body process it more readily.. if you are gonna be eating a fatty/greasy meal and or having some drinks you can just eat it plain ~30 mins before or after the meal/drinks and it should work... after will take longer to kick in and last longer in my experience w/ edibles.

i have never thought to use vapor resin for anything.. i always dump it down the drain when i clean.. let me know if you eat it how ever you try it.. i'm gonna have to remember to start saving that stuff in a jar. i want to try eating it now ha. sounds perfect to me.

w/ vape resin i would just mix it in and use it.. check out what dorkus_malorkus said about a week ago about using BHO, in this tincture thread
haha im so nervous trying this seems intimidating.

With 1 1/2 ft of pvc vape resin for over a year
1/2 oz of ABV
small amounts of kief
and small amounts of iso bath remains

What can I get the best tasting highest quality hash? or is this is? (obviously havent tried this method or the OP's either)
 
goatgobaahh,

lazylathe

Almost there...
Bets hash is made from the best weed you can get your hands on!
ABV will give a lesser quality since some of the compounds have already been utilized.

Dry ice hash is very good if made from high quality trim!
 
lazylathe,
  • Like
Reactions: ShipDit

Bvapst

Well-Known Member
Nice topic as some already said before.

Actually i ended to clean/reclaim my Q this way : I was cleaning the bowl with ISO and was scrapping all the rest (elbow,whip).. My most comon use for vaping reclaim : sandwich in a elbow with green or sandwich with ABV. Your idea is simply to make a ash of it.

My questions are (and sorry if there was another topic about it) :

- which tools are you using to reclaim the whip and elbow?

To reclaim from whip i'm just using the handle of a big spoon. This way i can't reclaim so far but I plan to cut the whip when it will be full of oil. About the elbow i already used a few different tools but i'm ending to leave a part of it where i can't get an acces. And i'm not so "on" to reclaim with ISO. I need to find THE tool. Will try the flat screwdriver next time!

- Don't you find you will loose some part of the goodies while rolling between fingers? (also concerned about the fatty hands or anything else, ash will get it!) I've learned during my smoking time to hold and to touch as less as possible the ash.

You can clearly see that the reclaim from whip, elbow "dome" and elbow "joint" are different... There is much more plant material sticked on the dome and it is much more yellowish/oil in the whip and elbow "threads". This way my last technique was to +- mix them in a special plastic spoon (doesn't stick so much) and then using it with ABV or green.

Interresting topic anyway. I didn't found yet what to do from my ABV BTW. Maybe some butter, we'll see.
 
Bvapst,

that herb guy

Well-Known Member
I have friends who own extreme Q's who are into something similar - Although most of them mix their kief instead of ABV, and maybe a bit of fresh green but usually just a lot of crystals!
They have some great results though i know that!
Will try and post pics at some stage

Have done this OP's way and this way. Kief mixed in is much better (IMO) if you've got a bit on hand, only takes ~.25-.3 and usually have some left over. Scrape oil, dip in kief, hand roll into balls then flatten into disks. Toss on some fresh herb and enjoy an hour or so worth of vaping.

It's obviously a bit better quality, but the main thing for me is it cuts down the slightly bitter taste of the abv oil being vaped. I only use ABV as the binder if completely out of kief. Though ABV would probably be better if you're going to be ingesting it, since you wouldn't need to decarb anything.
 
that herb guy,

GeekyGodiva

Happy Hairy Herbal Faerie
Oo! definitely trying this. I have no experience with vaping oil or hash, but this is an easy sounding project.
 
GeekyGodiva,
Top Bottom