Search results

Next week best case, but could be delayed until August. The cooling unit with more twists is now available along with updated bowl screens that are easier to set in place and has about 20% more airflow. The new alu T2s are coming with this new screen. New screen

Extras with this batch: Wand Stand v2 (Includes the adapter, improved performance compared to the previous glass adapter), 2.5mm Borosilicate glass balls.

It’s with German customs at the moment for about a week now; last time it took one month to be cleared.

I expect to have a small batch of T2 around the middle of this month of all aluminium colours to make sure everything is in order with the QC for the release. No Reloads or tool case yet, those might delay the release to August unfortunately.

It’s either what was quoted above, or more likely there is a burr at the second notch within the housing. Try to move the pointer with a pin manually to the end once, and that might fix it.

16mm id

The sample I have does seem to work with everything. I’ve been testing it for a while now. It works well up to around 70 W, above that, you need to keep an eye on the battery charge level to get the max power. It’s quicker to heat than the wand.

Yes

Yes, it could be delayed even further, unfortunately. I’m waiting for the reloads and the tool case.

Sorry for the delay, I’m still catching up. It should be on the way tomorrow or Monday with plenty of extras.

T2 has a slightly smaller ball chamber. The sleeve and cap height is 1mm shorter. The difference is about £11 if I remember correctly.

~90F less or 40-50C on the V2 compared to V1 glass adapter

Sorry for the inconvenience, please try to unscrew the indicator housing and check if the outer end of the spring is in it’s place within the side wall.

No, I think there will be a small batch initially to make sure that there won’t be more QC issues from the factory. I would guess so, if they order it then yes.

Yes

It will be available during the pre-order

No unfortunately, but it will be available at VDN. I’ve uploaded some new pictures to the website.

It does, all good there. Yes You might have the adapter set too deep? Not sure what else it could be.

Yes, just undo the screw and remove the whole indicator housing. You don’t have to take it apart any further, just check if the end of the spring is in it’s place. There is a video at the bottom of the manual of the v1, on the V2 it’s much easier to put the outer end in place.

Likely the outer end of the spring is not in its place. Could you please take off the indicator housing and check? I would recommend around + 40-50C compared to V1 with the same adapter.