Search results

Did this w my old v1. Wanna try 10mm in there but need long lead ones. This doesn't need to be wiped after each use and doesn't get hot. probably can't overload, haven't tried, will not try that. The crucible is pretty cool, but all i ever wanted was a V3.5 that didn't require unscrewing to...

for me the fix for this has been to unlock then relock the resistance. if it still keeps doing it, something is wrong.

that's what is referred to in this thread as a v2.5 and 2.7 just means a different mouthpiece but same donut inside. the resistance could vary somewhat from Matt's official v2.5, which usually ranges from .7-.8 brand new. but otherwise yeah, that is a 2.5 clone. also: thanks to whoever...

anyone else break more quick clamps than hair straighteners? gone through 3 so far, a 300, a 600, then another 300. they break at the little joint where you can remove the far foot to turn it around backwards to become a spreader. Right where the little push button is to release the foot, that's...

@Vape Donkey 650 so i set out to get pictures of this so you could see rather than just my lousy description but in doing so, and then cleaning more and taking more pictures.. i think i proved myself wrong. the white stuff flaking off turned out to be white char or ash type substance rather than...

This is a very well written and thorough guide. There is one point troubling me however.. the section detailing torch cleaning of the donut. That is quite a large paragraph devoted to extending the life of a $3.50 piece. The point just underneath that contains much more wisdom imho: "New...

Fuckin awesome video @WakeAndVape! Very informative and well put together. @OF and @Steven I'm surprised to hear you guys are having any luck running pull snap through a syringe of any material, glass, plastic or otherwise. I'm still rolling up and cutting up snakes. Wife says it looks like I'm...

if all i had was a large donut and an istick 40w, i would just hit it in tc. it's totally safe for the donut and in all likelihood would get you better battery life than running at a set wattage. when the v3 first came out i tried on my istick 40w a few times and it was totally fine, within...

Pretty sure re-tightening the screws after the unit warms up is what caused two of the holes to crack on my very first V3 base. They crack when it cools back down. I quit doing that since and have not had any more issues from several other bases here. It's not ideal but I just let em jiggle...

Guess i should have checked the mailbox before my last post bc the 10mm was in there. First off, the fact that the cup fits flush with the inside wall is a major improvement. It fits so well it would seem that the 10mm is the original intended size for the device and the 13mm is an expansion...

well.. I haven't whipped out any 2.5 bases since Wednesday or Thursday and what's toady Tuesday? So we're at a solid 5 days of 13mm v3 only. Just had to learn how to vape smaller amounts on it. Specifically, what I'm doing differently is not worrying about cleaning the donut back to white in...

Me too. Excited about the 10mm donuts and about the higher resistance donuts too. They will be more economical on both medicine and battery life. I really enjoyed my high resistance 2.5 bases. They were 1.4s. They give more hits, but thinner hits per load. Good daytime sippers. They get small...

if you're referring to this, it is merely a diagram. For the other colors @divinetribe said " i have black coming oct 10 i am working on all the colors not sure when they will come to fruition.. "

@Joel W. Seen the V3 from Divine Tribe/Crossing? Cup has 14mm inner diameter. you could twist and stuff a lot of wires in there. kinda pricey but there's an FC user special link for half price. I don't work for them I swear just, when i first took one apart for cleaning I thought woah.. the...

notice the one he's cleaning in the video has a broken out ohm symbol. those deals pop right out if you twist too hard in there with a rag. be careful unless more airflow is what you're after.

Getting interesting results from net TCR calculators here and here using Fernand's measurements. The two I tried were in agreement of a ~1200 TCR to take a material from 0.45->0.55Ohm from a starting temp 25C to a target temp pf 204C. Weird. But then I noticed isn't PPM 10^6? which would change...

i’m back up to 40W now and loving it. And for comparison I was a 15W guy on the 2.5s. Tried as high as 50W and it survived one load without any immediately apparent damage. And the 245 does seem best so far in my testing. I tested from 100->600 at intervals of 50. 250 seemed better than 300 or...

Wow, v3 is ohming at 0.45! What TCRs are other people using? The 245 I tried first never hit Temp Protection. Nether did TC-Ni or TCRs from 100->320 so far. ok I'm back and figured it out. It was the wattage. Tried it on my iStick TC40W and like Matt said, you wanna dial the temp down compared...

You probably already figured this out but yes you can use a box mod w a disposy. Just keep the wattage super low. For real, start at 1W and work up. A lot of those hit great at around 5W. Some can go up to 10W w/o burning out. They vary greatly in build quality and materials. There's lotta...

So… I'm not a huge poster on here, but felt I needed to interject something. Bc I keep hearing this thing about the iStick 40W TC only does TC at 40W, so it's blasting at 40W the whole time. This is simply not true IME and there are two ways to prove this to yourself. One is to either look in...