Search results

Yep, that would be the good Doctor, right? That should not change the air flow up past the heater on one side (the back) so I suspect it won't effect the uneven heat distribution? Actually I think it goes the other way? It doesn't change the accuracy per se, the specified temperature (330F...

If you get normal operation with the PA, I agree with you, time to consider a new battery. I have several battery packs kicking around from testing and such, so for me it's a no brainer test to run. If it were me in your position I'd keep it (replace the battery, not the entire unit) as the...

Excellent observation. To that I'd like to add 'no toxic fume paranoia'. If you eliminate those who know they are more sensitive to such things as the rest of us, and while they don't know much about food grade materials and catalyst out gassing they know for certain they're toxic and the rest...

Obviously you didn't breathe in too many toxic fumes, you're still with us....... And there's noting really toxic about those fumes anyway. Since this is 'food grade' rubber, the catalyst is selected to be non toxic (based on Platinum IIRC), higher price (isn't it always?) but safe in this use...

No, I don't believe any did. That cap is a ten dollar part from the maker's site? And, no, I intentionally didn't order it (yet) as I wanted to try it out of the box first and see how it plays. And I'm not too big on the way it looks like it's been done, a lot of metal (and aluminum to boot?)...

Do not use the Solo charger, it's the wrong voltage. It's 12 and you want 5...... However, like the Solo charger, the Air one has a 'universal primary', 100 to 230 VAC. Once mechanically adapted to fit the local socket you're good to go. But be careful of the Solo charger. The connector is...

Gentle Friends, Has anyone else noticed uneven vaping in the bowl? That is most of the work in mine is being done 'on the inside'. That is the side of the bowl closest the MP. A while back I noticed condensate and fouling was collecting on the cap on the side closes the curved part. The...

You're welcome, I know that one. It starts out 'as long as I'm ordering something else and paying shipping.......'. I log in and leave stuff in the cart sometimes until something I can't live without comes along. Stuff like Titanium wire. Teflon and Delrin rods, PTFE tubing and so on. The...

Lots of variables in play that could effect total time by a factor of two or more? Different power levels, battery capacities, insulation, temperature and so on. Something between 4 and 10 minutes I'm estimating, far short of the 320 plus advertised earlier on. I think the EV has a couple of...

You're welcome. I saw it, and was trying to cover 3 additional bases: Show how to find it by the search, specify which size and point out the normal/high temp option. Thanks. OF

Under 'vinyl caps': http://www.mcmaster.com/#vinyl-caps/=vxfop0 You want half inch nominal size, normal ones at the top, high temperature versions about 2/3 of the way down. OF

I love it! Makes it sound like a political commercial, doesn't it? Not to quibble but isn't the correct format "I'm 2clicker, and I approve this message"? Best not get the FEC, FCC, FBI, DEA or any other alphabet soup outfit on our tails for no good reason, right? Besides why should we get...

Yeah, like that one....... So I just got an Elevape. Fun, and very much like this guy in principle. It too uses a single cell to heat air which then heats the load. The loads are similar size (EV is 1.0cc give or take, I'm using loads averaging just over .10 grams). I'm doing hits at step...

Sorry, you fooled me by asking it on the Air thread I guess? In the general cases I think think both makers, along with Panasonic and a few others make 'plenty safe' batteries, I put them in the same class in that respect I guess. In air they're still in the same class......the 'don't use...

The smaller one is 1/8 X 1/4. The short one 'nests', 1/4 X 3/8. I use a lot of the latter for various stuff. I also use the next size up, 3/8 X 1/2. Fir instance here: It's used as a gasket so the round top can grip the flatted MP. Seals great, too (passes the 'suck test'). Notice I cut...

Wow! You just jogged what's left of my memory.....from last year. I came up with this fix for the one I lost: A short piece of small tube inside the neck with a shorter piece of the next size up doing the actual seal (the small tube keeps it centered). Works fine. I offered to send some...

Sorry, you lost me..... What little gaskets? The rubber washer between the cap and the glass part? Yes, IMO doing so provides some 'give' at that point, protecting both plastic and glass? Was that it? If the question is 'do you use rubber tube between the MP cap and that little bubbler...

It depends (doesn't it always?). I got an early version Air with both capped stems, they're basically identical WRT draw, bowl capacity and length being the differences. However, it seems later production has larger holes. I'm going to assume this is going to be the future size and latest...

Sorta. They are almost surely the original (70mm) version with the full size bowl, not the shorter (60mm) version with 'shortie' bowl shipped with current units. AFAIK the factory is the only place that sells all 3 versions. PV is getting them 'any minute now' (no doubt with PIU right behind...

Gentle Friends, Care to try a little bubbler on our new found friend? How about this one: http://www.dhgate.com/product/glass-atomizer-ash-catcher-dry-herb-vaporizer/213068750.html#myaccount_orderdetail-1-null This is what it looks perched atop the little rascal. That's about 3/4 inch of 3/8...