Search results

I certainly don't want to share bad info but I learned to use my Herc by watching Gary's youtube videos where he clearly shows inserting the rod from the bottom. How do you even insert the rod from the top, with tweezers?

If the herc is warm (not hot! Do your cool doen pulls for a minute then disassemble!) from use it will be easier to get apart if very oily. Squishing the coils a ton makes them harder to get out. Squishing a little bit to create a slight drag/ interference fit against the walls of the chamber is...

The Pro Tank is an e-cig juice tank. Clearomizers and such - It is meant for PG or VG liquids not hash oils. I sent you a PM with info on different types of tanks designed for BHO. Did you check out any of that information?

I've used two enails, one built with some of the Dnail diy kit, and I don't have a reason to trust the temp displayed. I'm also using carb caps and trying to get that light sizzle/little as possible before capping. Perhaps it is 5-600°, if not, I had no temp measuring device to check. I'd be...

Herc and Nibbler vs Kiss and nibbler x

I came up with a similar idea awhile back but my goal was to have a shorter device. It wasn't pretty so I didn't share it. However, half an hour ago, I simplified the grommet. Introducing my Nibbler K concept (Nibbler KISS) Instructions: I'll be working on a base-attachment piece...

I don't necessarily mean the double cart top itself, just that era of Persei, the one without short protection. Sounds like there is absolutely no advantage to the older top, then.

Is the old V1 Persei top that came with the double-cart top, a true "mechanical" top then? I am under the impression that's the only top (besides the Iris) that will let you run the CR123 at 6V and dial the core to any voltage you want. Or is that not the case even with the V1? I am getting...

I'm happy with mine for what it is. When I bought it 5 years ago it may or may not have been the best bag vape on the market. It was the best vape that I had personally used, so I bought it. Today I know it's not the best... Time tends to render things obsolete. Thankfully today it's easier to...

Somewhere between 0 and 70° degrees works fine. With the Nibbler 90° means water gets in your mouth. If you are hitting it beyond 45° sometimes a bit of oil will pool. Rotate the unit to vape that stuff (IE if you had the button up. Flip it so the button's on the bottom and you push with your...

So regardless of your inhalation technique, to be leak free All you need to do is change your 30 second passive cool down to a minute or two of cool down draws. After you are done with your session simply draw through the Herc without pressing the button. This cools down the oil and makes it...

Looks like you need a deep clean due to overloading or impure material: use a toothpick to gently scrape any excess, old, burned oil out of the cup, soak that thing in ISO, gently use a toothpick to clean the coil, back in some fresh iso... When it's clean and white, take it out, let it dry...

It's only for storage. Take it off before using for any purpose.

I'm going to buy some EO carts this afternoon and would really appriciate knowing which ones work the best on a double top @ 3.7V. I didn't enjoy the flavor from 5ohm carts @ 7.4V. My experience leads me to believe the cart sockets are wired in parallel so the load is half of an individual...

I have a fleet at this point, but my standard e-cig setup is an Omicron with the SS tube (14500 battery) and a Protank 2. I'm a sicko and keep another Omi HVD SS in my backpack with a kiss cart attached, but with one Omicron unit it's super easy to swap from one attachment to another. For...

Any old school double-top guys out there? What is the best cart for a 3.7V setup? I have only used the double top at 7.4V with 5 ohm carts so far which I never really got the hang of. Even with good priming at 3.7V and then once on 7.4V, even with less than 1 second pulses I'd get pretty bad...

Do they make a bunch of stuff I don't know about, or do you have way more duplicates than me? Cool stuff... Saw this last Monday morning, asked back on pg 823- curious...

Due to the different airflow design I wasnt sure about using just the element... I left the cart on the Okeanos base, screwed the kiss mouthpiece onto that. I think other wise you *might* have to swap out the posts.

This was a bad time to break my new Persei top again and send 'er in for a warranty. Maybe i should buy a black rod if i can ship it with the fixed Persei on its way back....