Search results

You haven't had to fiddle at all with the coil? Yeah I wish I had a D-Nail box to test this on because I am suspecting it's the coil. Never been used; Extended Life Flat Coil so it could be DOA from the beginning. How would I know?

Ah well there isn't going to be any SiC in stock last I read with the exception of 16mm. If you need a 30mm SiC insert maybe you can find someone willing to part with theirs. It will be a few months until he has things situated. What kind of flame are we talking about here? lighter or butane...

Well even if he used MAPP gas on it's own it can get _A LOT_ hotter than a Propane Torch. So even the argument the SiC dishes have been torched and torched to death is valid. But they have not been torched with MAPP I only used when I was cutting or sometimes soldering (high temp soldering)...

700 isn't that bad; the problem is MAPP is much hotter than that. MAPP gas can be used in combination with oxygen for heating, soldering, brazing and even welding due to its high flame temperature of 2925 °C (5300 °F) in oxygen. Although acetylene has a higher flame temperature (3160 °C, 5720...

The point of not using the flat coil Halo is that you have room to dab on; so your dabs won't run off the surface and down the sides or nail. You don't get much when that happens

So you used MAP Gas; that is def hotter than propane and butane.

Good point; there's the 1.4 dish which is pretty nice but it's not a Chicago style according to the title on the site. The description however does indicate it is http://www.d-nail.com/nails/ti/v1-4-titanium-dish That's what led me left; I am not good at giving advise that isn't mine so I try...

I updated the post to reflect your comment. I didn't know about which dish so I just went from the hip PSL is the Temp correction coefficient on the Auber Nail. So you take a K type Thermocouple and crank it up to 700 and take 700 / current_temp to get this result. Helps the nail give...

No I think you are right. If I had a D-Nail controller I'd love to see if this flat coil acts as badly on their hardware; if that's the case it's the coil. It's never been used to it's not the best idea to assume it's working. With no PSL set it to 530 and it jumps to 560-570 and then down to...

@herbivore21 gave me a really good suggestion on that. He recommend either the 1.4 chicago style deep dish or the v1 flat titanium dish from d-nail for use with the sapphire insert. Yeah the SiC halo won me over. I had some issues (I guess) with heat transferring into the product and it not...

At this point I'd opt for a cheap D-Nail controller just because I am trying to use their flat coil and eh would hope it would just work. Unfortunately they are not cheap, 400$ is a bit much just for a box (350$ for the scratch and dent, 200$ for the DIY) So in the mean time I think resetting...

Awesome so I was able to get a PSL of 1.4 (ish) it's under 10 degree's off so eh. Now I can't get it to stick on the temp; it seems to get up to say 530 and it'll drop under by 15 degree's and it'll start heating up and then overshoot So reducing the P didn't help; nor did changing it really...

Hex Nail also will take time to ship; I think Summer is the target for new orders. But I haven't paid attention to that thread in awhile. I use the D-Nail SiC halo using the Flat coil from Auber and it works. But I am using the Slim Series nail on it. It is compatible with the HE InfiniTi...

What base were you running that on? third party coil I don't know if that would happen on. I hope; i'm swapping out the coil for a D-Nail coil once I get everything settled with my RDK-300 and that coil (got my Thermocouples today so I will be glad to swap them) Tiz a little tighter than I...

You forgot the Auber RDK series; I own the RDK-300 and it's under 100$ (okay 99$) and the coils are not going to soak you (45$ for a flat coil) They have their own nail; but I am just referring to the components... it's hooked up currently to a D-Nail SiC dish Halo Works fantastic

Feel free; I've opened an partial refund on Paypal. I have no discount codes or anything; I just want the 10$ Postage for the 20mm SiC bucket I had to send back that was sent to me in error (of the flat coil size) and the cost of the SiC dish. the 15$ CCA Credit would be nice as I ordered this...

I really don't think anyone knows what's going on. I got a tracking number for a replacement Quartz insert (I guess) the other day. Wasn't expecting it I'm still waiting for the refund on my SiC insert to be honest; Josh hasn't replied in awhile and nor has @mrbonsai420 So who knows what's...

There's some NY Style Cheesecake in the freezer; that I have a slice of every nite; end up having to share a bit with my cat. Seriously He gets antsy when he can't share the munchies with me

I'm not sure if they really do. If they have access to the keys it is likely through lawsuits and not direct access. I hope; but the truth is most businesses work with the government faithfully because it is considered one of the things you do as a good citizen. Work with your government...

The problem is there are like 12,00 new paypal like certificates issued by letsencrypt daily. Scammers are using them badly; the cost for SSL Certificates has never been that high for a single record entry. It's really there to provide a good mechanism to stop spammers from getting them We've...