Search results

The center post of the SR-71 is a press fit design and makes electrical contact on the side of the rod, with the contact strips on the heating rod. The press fit design causes a few components of the bottom assembly to come apart when you disassemble it, as the heating rod and center post tend...

@StormyPinkness and @OnCloud8 you're on the right track. I've made videos showing 10 second button presses on Ti carts, but I get better flavor from shorter pulses, even with tiny little gaps in between. Even 1/4 second or half a second off the button every 3 seconds gives the oil a chance to...

Not fast enough that it will turn your unit on and off.. Pulses also give oil a chance to soak back into the wick and get close to the heating wire which makes the next press work well, better then if you just keep riding the button.

Has anyone heard of / tried budfolio.com?

@IAmKrazy2 I pick mine up by the rim and set it down immediately on a silicone mat. If you wanted to, use one of the oil slick duo pads as a potholder to pinch the top of the vapexnail, and set it down on the other pad, or in the nail buddy. This video is of my actual first use of the...

Uh-oh... Where should I go? It's only 75 pages, I've read threads more than 10 times as long here.... I need to know lol

I can do that. So I work at a 502 recreational store in WA state. Was using my Okeanos on the 8 before work. We just got in some undiluted co2 oil prefill carts, 510 threaded of course. So, I swapped caps on my 8 and was rockin' and rolling in about five seconds. Okay maybe seven seconds...

:D @MinnBobber I wish I knew more first hand I've never tried one myself. I have read this thread and the previous Cloud thread and have read so many great things about this HT in particular that I had to get it. But at $160 now I'm honestly thinking about getting a second to stash in my closet....

For SR-74x (and SR-71) the entire white band between the two metal contact points must be fully visible. Put the bottom edge of the upper metal band flush with the bottom of the threads while you tighten the nut.

It went really well, although I'm down to only one nail (two more incoming) so the majority of the time it was used for herb (there were two e-nails on deck and a bunch more rigs and dab hookahs provided). I don't have a dry mouthpiece so I brought my Sidecirc hydratube up. I've actually...

Don't you love that feeling when the Hydratube you just ordered From the Vault (and were triple-charged for thanks to Paypal, who VXL uses to process payments) goes up on Massdrop for a potential $116 off, an even bigger savings than the $75 off "soothe your pain" coupon VXL issued from the last...

No it puts battery voltage there is no pwm regulation in the Persei. Just use shorter button pulses with high power.

Every time batteries come off a charger they are at 4.2V. In series voltages add so that's 8.4V. Same as running 8.4V on the Core. Ohm's Law states E = I x R. Where E is Electromotive force measured in Volts. I is current measured in Amperes. R is Resistance measured in Ω or ohms. Two ways...

No, the SR-71 rod only works on the -71. It will not work with the spring loaded post of the -74. The 71 rod is lower resistance and produces higher wattage so you must use different techniques than the 74.

SR-71 white rod is 1.5-1.7Ω - I don't go above 7.4 lol SR-74 white rod is 2.2-2.4Ω - I might occasionally crank it up to 8.4 If i recall correctly

I would suggest submitting a ticket so I can help you out! http://www.w9tech.com/vaporizer-contact-us/

You're saying that the Ti coil is rising up and you have to push it down with each load? I suggest taking out the coil and squishing it to create an interference fit in the chamber, so it stays firmly on the bottom. What might be happening is while you are drawing, the oil soaked coil is...

Did you ovalize your coil to create an interference fit, so the coil stays firmly at the bottom of the chamber?? It might be possible that your coil is sliding up the tube and isn't hitting until you get the stainless chamber hot enough for the coil to unstick and slide back down over the...

Full melt extracts are the way to go if you can get good dry sift or bubble. But the herc does not need a concentrate that passes the foil test; hell I have put straight kief out of a sifter box into mine, on top of an oil coil vaped well into its buffer till no more vapor happened- probably...

Actually since it so easy to use I find myself using Hammer mode for my 7.4v herc some times> I dont have a 3.7 put together right now but it's perfect for a 3.7 herc with the longer warm up time Although i dont necessarily recommend 7.4V hercules hammer mode to everyone... It is fun to have...