Search results

It's not clear to me whether the odor that is "seeping" into other units is coming from the vape itself, or from the exhaled vapor, but I suspect it is the former. Conduction vapes, or hybrid convection/conduction vapes like the Solo, can really emit odors when heating the material. I remember...

Thanks, I'll check it out. I bought the LEDMO power supply after someone either in this thread or in the Grasshopper AC Adapter thread claimed that it worked with their IO. It did not work with mine :(

Are you using a commercially available PSU or is the "no-name verdamper psu" a custom made power supply? I have two 5A power supplies that work with the OG Hopper but not the IO: LEDMO 12V 5A 60W Power Supply Adapter Chanzon UL Listed 12V 5A 60W AC DC Power Supply Adapter I had to purchase...

When using on-demand mode it can take up to 20 seconds to reach max temp (428F). The on-demand timer starts when you push the button, not when it reaches the set temperature. If it takes 20 seconds to reach the set temp then you only have 10 seconds left to draw. Try waiting for the vape to...

One area for improvement with the V3Pro - material tends to stick to the screen when you remove the mouthpiece. This is especially true if you vape part of a bowl and allow the device to cool down with material still in the bowl. The resin in the material causes a significant amount of material...

I dropped my black V3Pro and the battery door flew off. The magnets separated from the battery door and stuck to the body. I was able to repair it, but I also ordered a new battery door. The new battery door has a covering over the magnets - they are no longer visible, and they probably could...

Similar experience here. I sent my first TinyMight back (after a period of productive use) due to increasingly poor performance. The unit that I received back was way hotter, generating huge clouds at 5 compared to 8 or 9 on my old unit. Yes, impressive.

This vape continues to impress me. For me it's max temperature, on-demand mode, 3 "cigar puffs" and then a steady, medium strength and speed draw for 8-10 seconds and I get a nice big cloud. No cigar puffs on the second draw, just medium strength and speed and I get another nice big cloud. Two...

I have two TinyMights and I can't open the battery lid with my fingers on either one of them. I keep a certain type of paper clip in my cases so I can open them. The battery lids on my units are just too tight to open with my fingers, even if I try to apply gentle downwards pressure as I turn...

My first came with a Sony VTC6 18650 battery. The TinyMight uses a flat top 18650 battery.

I received a UFO from the Stash Shack and it did include the extra glass tubes and spacers. So far the UFO is working fine for me, but I am very new to the VapCap and to induction heating.

My batteries are pretty much undamaged. I just removed both of them again and did not damage them at all. I think the battery that came in my Silver Gradient model has a slight dent in the wrapper near the positive terminal, but I think that was from my first attempt at getting it out. And it...

I absolutely do not have a bad Fog Pro. It heats up fine, it produces huge clouds (after a while), it extracts fully, and it produces strong effects. I just don't like the fact that the first hit is often whispy, and I have to draw on it for a while before it starts producing clouds. If you are...

I use the same flower and grind in all of my vapes, including Hoppers, TinyMights, and V3Pros, so that is one variable that is tightly controlled. The Fog Pro is the only one that takes extra time and effort to start producing clouds. The same flower and grind in one of my TinyMights produces...

This is so funny, because that is how I feel about the Fog Pro. I use a medium strength and medium speed draw on the V3Pro, once I get it primed with 3-4 cigar puffs (which are pretty strong draws). With the Fog Pro I feel like I'm pulling as hard as I can to get the material soaked with heat...

I really don't think so, as my Fog Pro gets hot, produces lots of vapor, and thoroughly extracts the material (I can easily get dark brown to black ABV). It also produces strong effects. The thing that I don't like about it is that I have to work too hard to get it going. My first draw often...

This is not my experience. I get clouds on the V3Pro consistently, and I get great effects with it.

True in my experience. I ordered my first TinyMight in December 2019 and it could not be calibrated. I only ever saw red lights coming from it. I no longer have it. It was either replaced or completely upgraded as the result of an RMA. Sounds about right also. I ordered my second TinyMight in...

I was able to disassemble the glass mouthpiece for cleaning. First I removed the screen/cooling unit, then I pulled upwards on the glass mouthpiece. The silicone holder pulled right out of the metal casing. The glass tube has a ridge that holds it in the silicone.

This is not my favorite vape and I may not keep it in rotation. I struggle to get decent vapor production on the first draw of a new bowl, even when I cover the air holes and use cigar puffs. The second draw usually produces a nice big cloud. It just takes this vape a little longer to get...