• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Search results

  1. C

    Multi-brand X MAX STARRY

    Yeah, especially when you're vaping those electronics ;D If the temperature was the case here, then this in anything but a proof that there's a bad insulation inside this device, which should be quite scary.
  2. C

    TinyMight / TM 2

    Wow, that's a concrete explanation and quite specific knowledge :) Thanks a bunch man! Just out of curiosity. How do you know how TM units are calibrated? ;)
  3. C

    TinyMight / TM 2

    Are you sure about that? Did you see how the coil is screwed onto the board? There are just two connection points to the coil. One though the single point on the main board. One leading to the battery though the steel(?) tape going up to the top cover – top case serves as a conductor to the...
  4. C

    TinyMight / TM 2

    You may be right, I am not so familiar with e-cigs etc. :) However... In fact (if I'm not wrong) the current flows directly from the battery, through the top case, then through the heater, down to the electronics board. I'm no expert in electronics, but having seen the internals, this is more or...
  5. C

    TinyMight / TM 2

    While I'm not 100%, I'm pretty convinced that's how it works. That's it :) I did not read the whole conversation here, although I think that you might still call this vape a regulated one. I also believe that once the dial is set to some number and heater will reach this setting's equivalent...
  6. C

    TinyMight / TM 2

    I believe that in fact you are not setting the temperature (per se) by turning the potentiometer. You are rather setting the power that will be delivered to the heater.
  7. C

    Healthy Rips FURY EDGE

    Sorry for late reply and thanks for trying to help! :) Please don't take me wrong. I didn't mean to be too harsh, however I was pretty disappointed when I received it. I got it from the shop as a replacement because one of my FE's button was not working properly. I am not sure if they will...
  8. C

    TinyMight / TM 2

    I would strongly advice you to do so, my guy! I just received my parcel from them and I need to say that they have some outstanding quality of service! :) They are so helpful, and so fast with it, that it's almost unbelievable for me. It took me literally less then a week (around 5-6 days) from...
  9. C

    TinyMight / TM 2

    Exactly. It's on the opposite site to the tool.
  10. C

    TinyMight / TM 2

    I would be really cautious with the top case. Before taking it off, you need to use long T20 screwdriver (via the bottom hole) to unscrew element that is holding battery tape (going from heater up to the top). It was added in TM2 so following TM1 guides directly may result in damaged tape or...
  11. C

    Healthy Rips FURY EDGE

    I received Fury Edge SE as a replacement recently and I need to say here that I will be sending it back to the shop. SE version mouthpieces does not fit well on body and WPA even tends to wiggle back and forth. I also hate that sealing was changed. Such a waste of money on my spare parts for FE...
  12. C

    TinyMight / TM 2

    Will most certainly do. Thanks, for telling. I always believed that all steel alloys are magnetic 🤷🏼‍♂️
  13. C

    TinyMight / TM 2

    I did not unscrew the ring and clear it that deep. Otherwise yes. Right now I noticed something strange. Is your battery screw or the ring above the oven being attracted by a magnet? It seems that metal body parts are of non-magnetic alloy.
  14. C

    TinyMight / TM 2

    I've just got my hands on my TM2 and need some advice. I performed a burn off, around 15 mins on different temperature settings. After a couple of bowls I can still taste some funky smell. It may be the wood, but even I if so, I'm still curious whether anyone else experienced something similar...
  15. C

    TinyMight / TM 2

    I have Arizer Air Max and no complains there when it comes to glass screen. I would insert CU only to have some kind of a screen and adjustable bowl size, without using mesh screens which can be pain in the a**e for me personally ;) Also, I'm asking about 18 mm WPA with glass screen just...
  16. C

    TinyMight / TM 2

    Can you please tell where did you order 18 mm WPA with glass screen? :) I want to order 18 mm WPA as well because of the airflow. I was about to pull the trigger on original one, but I'm not convinced about steel mesh screens or the need to use CU with it.
  17. C

    TinyMight / TM 2

    Which adapter are you speaking about? Original 18 mm WPA does not have an integrated glass screen 🤔
  18. C

    TinyMight / TM 2

    I guess it's only for guys attending at the Cannafest 2022. There are no shipping options when you try to go though check out, and it's hardcoded that you need to pay France VAT for that order. Shame on me, that I did not go to the Cannafest this year, as it is real close in neighbour country... :|
  19. C

    Discontinued Healthy Rips FIERCE

    Their visibility is probably based on the warehouse stock. You can't see it when page is set to EN language. It's visible in Polish version :/
  20. C

    Other brands of Accessories that fit the TinyMight.

    I actually think that HR going for 12 mm with Fury Edge and Rogue was a quite good choice (it fits DynaVap accessories like BB9 perfectly). I understand the backwards compatibility issue though. I replied to your other comment in Fierce thread. It's a shop based in Poland that I was talking...
Top Bottom