Search results

  1. F

    XVape XLUX ROFFU

    Glass bowl, V3Pro or POTV One dosing capsule, glass mouthpiece from the WPA. With the dosing capsule I don't know if the glass or metal bowl makes a difference. The glass mouthpiece from the WPA is more elegant than the stock mouthpiece and works great. The dosing capsules add just a touch of...
  2. F

    AirVape Legacy Pro

    I use the ALP exclusively for concentrates. It works great for me. I pre-heat the pad (428 F) with a dry draw for about 30 seconds, turn it off, then apply the concentrate to the pad so it melts in. I then power it back on, let it pre-heat for about 30 seconds, then start drawing. I get nice big...
  3. F

    Dynavap VapCap

    Will add to the other favorable reports. I use them in a couple of my DVs and they are a convenient way to cut the bowl size in half. They do seem to make the stem hotter, but that doesn't bother me. I find the half bowl to be the perfect size dose for me.
  4. F

    Anvil by Vestratto

    My ideal Anvil usage is a single hit that extracts the whole bowl evenly and leaves dark brown ABV. All of the induction heaters that I've used with the Anvil can accomplish that. In the best case scenario I can accomplish that with approximately 45-50 seconds of heating. I don't know how the...
  5. F

    Anvil by Vestratto

    I have not used the VHB induction heater but I have used 5 other induction heaters with the Anvil. The induction heaters do not defeat the benefit of the Anvil design. I have never used a torch with the Anvil and I never intend to. The Anvil works great with induction heating, with the right...
  6. F

    TinyMight / TM 2

    I've been using the TM1 since 2019. I recently bought a TM2. Overall the TM2 is a much nicer vape than the TM1. However the "dark ring" issue has not improved for me. I use the stock stem. I started my first bowl at temp 6. Got the same clouds and cool vapor as with the TM1, but also got the...
  7. F

    XVape XLUX ROFFU

    I bought two of the WPAs and both arrived intact, however I managed to break one of them before even using it :( I had installed it in the top piece and then I dropped the whole top piece. The glass ended up being crushed inside. No worries I ordered more :) I don't have any water rigs. I don't...
  8. F

    Anvil by Vestratto

    I am not planning to purchase the VHB induction heater, but you should know that there are at least five commercially available portable induction heaters that will work with the Anvil. I've settled on the iSpire Wand because of its replaceable batteries, but all of the other induction heaters...
  9. F

    Pen Xmax V3Pro vaporizer, convection, on-demand&session.

    I tried a VTC5A and a VTC6 in the same V3Pro and did not notice a significant difference in vapor production or ABV color when compared to the stock (Eve) battery. I use a dosing capsule in session mode. I generally allow an additional 30-60 seconds of heat up time after the buzz. Temp set to...
  10. F

    The Dani by Battery-free Ganz

    I use the Wand with the Anvil regularly. It takes between 52-56 flashes to get the click, and another 30 flashes after that to get the results I like. Assuming 1 second flashes that's roughly 1 minute and 20 seconds. The battery indicator on the Wand is unreliable for me. In actuality the Anvil...
  11. F

    AirVape Legacy Pro

    Sorry to go off topic but you might want to check out this thread: Evolv Cricket
  12. F

    AirVape Legacy Pro

    I have access to all types of concentrates in a state legal market. I have not tried any types of dry concentrates, only badder, sauce, live resin (I think). I don't pay too much attention to what I'm buying as long as it's not dry sift or kief etc.. I use 428F for all concentrates. I take a...
  13. F

    AirVape Legacy Pro

    I use 428F, which shows as "Wax Mode" on the display. I only vape concentrates with the Legacy Pro, using the concentrate pad. Works great for me. It does require a long slow draw (30 seconds or more) to get it going, but once it's up to temp it produces nice clouds without too much heat.
  14. F

    The Dani by Battery-free Ganz

    There have been two reports of successfully heating the DaniVape with induction heaters. It looks like the DaniVape oven is slightly wider than the Anvil oven, which may prevent it from fitting in some of the existing portable induction heaters on the market, but the iSpire Wand has a much wider...
  15. F

    Induction Heater Yllvape IH Power and temperature controlled induction for use with Dynavap

    I have used the Anvil with the YLL Induction Heater many times. I don't recall seeing that error message. I use power mode and I heat the Anvil for 15 second cycles (watching the timer in the display). After the Anvil clicks I heat for 2 more 15 second cycles followed by one 12 second cycle...
  16. F

    Anvil by Vestratto

    No, the Anvil will not fit in the glass part of the DV adapter. It fits perfectly within the silicone sleeve of the DV adapter, but without the glass part. I flattened an old basket screen and inserted it into the bottom of the silicone sleeve to stop the Avil from sitting too deep in the coil...
  17. F

    Anvil by Vestratto

    I found that heating for 30 flashes after the click works perfectly for me with the Wand. I use the button to turn the heater off and back on when the Anvil clicks, then I count the 30 flashes. The Wand takes longer than most of my other induction heaters with the Anvil. I feel like that is due...
  18. F

    Anvil by Vestratto

    I seem to recall reading page after page in this thread discussing which torch, which butane, what flame length, where to point the flame, how long to heat, how to refill, how to purge, and how to maintain various torches for the Anvil. If you've got your torch(es) dialed in for the Anvil that's...
  19. F

    AirVape Legacy Pro

    Heat the pad before trying to apply concentrate. I run at 428 F and do a "dry" draw for about 30 seconds. Turn the unit off, apply the concentrate - hopefully it melts fully into the pad. If there's any left on top it will probably stick to the gold spacer disc when you close the unit. Almost...
  20. F

    Anvil by Vestratto

    I don't have the exact diameter of the Anvil's oven, but the Anvil will fit into an opening that is 13mm. EDIT: The YLL that I received has the hole in the case slightly askew from the heating coil, so the Anvil tends to "catch" a little when inserting/removing it from the heater. Otherwise...
Top Bottom