Oh hell yeah! Def purchasing but gonna DM you regarding the pre order timing/shipping as it may overlap with a move!PHASE3 ZXL [2025] pre-order is officially live!
Click the link below to learn more / place an order
PHASE3
www.gophase3.com
Changes for 2025:
Slotted air intake, inspired by our PHASE3 Z8, the original zirconia desktop vaporizer
New 18MM to 14MM micro dose bowl.
As always, thanks so much to everyone rocking with the Z Team and supporting the vision, much love FC family!
If anyone has any questions please don't hesitate to ask or reach out.
PHASE3
-
SCAM WARNING! See how this scam works in Classifieds.
Phase3 Vaporizers
- Thread starter invertedisdead
- Start date
Have a great weekend guys!
Wonderful. Count me in for a 18mm to 14mm bowl for current ZXL owners.Appreciate you homie!!
Just want you to know I didn't forget about ya at all! I just want to observe how orders come in initially, to make sure there's enough interest to make it worth collecting for the 18MM to 14MM bowl individually.
Appreciate you good folks a lot!
Thanks Ryan. Hope you are doing well.
Have a great weekend guys!
Bro that big of a hit on just that much herb and pure convection heating is seriously crazy, people should be going to both of our websites right now and hitting the big buy button after that epic rip
You got it boss!
Trying to hold it down, appreciate you friend!
bizwaxzion
Enigmatic Cannabist
Glad to see another ZXL round. Gettin a buddy for the Z8.
Chicken No Name
Dazed and confused
Well it's done....
Ryan, can you check your messages as I've managed to buy two and can only afford one.... FFS. I wasn't even mashed but still managed to bugger it up. Apologies.....
Ryan, can you check your messages as I've managed to buy two and can only afford one.... FFS. I wasn't even mashed but still managed to bugger it up. Apologies.....
Just wanted to thank everyone from the last ZX shipment who left a recent review on the PHASE3 website.
I saw a number of stellar new reviews yesterday when editing my site and that really made me feel good!
That really helps me out a ton, a lot more than anything I can say myself so thank you all kindly for taking time out of your day to do that!
Salute to all the FC OG's rocking with me!
Super cool to see enthusiasts and peers really enjoying my designs!!
What's up friend I just replied to your email, no worries at all I'll definitely get you sorted out and taken care of!
Thank you!
I saw a number of stellar new reviews yesterday when editing my site and that really made me feel good!
That really helps me out a ton, a lot more than anything I can say myself so thank you all kindly for taking time out of your day to do that!
Salute to all the FC OG's rocking with me!
Super cool to see enthusiasts and peers really enjoying my designs!!
What's up friend I just replied to your email, no worries at all I'll definitely get you sorted out and taken care of!
Thank you!
greenganja
Well-Known Member
I don't know that it would be possible to make a wireless zx. The reason I say that is there would have to be a lot more ceramic zirconia int he heater head to allow for the a wireless zx to hold enough heat for extraction & recovery. However I could be wrong about that and I'm sure Ryan will see this post at some point and offer a better explanation that what I can offer. Part of what I love about the zx is it's small size and weight. The wired version weighs almost nothing and has a small footprint. In my opnion a wireless version would constitute more weight and a bigger form factor. I did see that some companies like Vapvana and the Hornet are now making similar sized devices like the zx. I think the hornet uses stainless steel and the vapvana natural is using quartz with sapphire balls and is wireless. You might take a look at the Vapvana Natural if you want something like a wireless zx. You never know what ideas that Ryan may come up with next though.
JT-Shawk
Member
For something wireless the Hornet works fantastically with the z bowl. I've started using them together regularly.
nicknobody
Well-Known Member
Picture? Please.
I'm waiting for a price quote for my wireless stand so I have a real place to put them; if that gets approved then I'll bring them out.
I can increase the heat retention of the ZX incredibly easy
#weinnovate
Cheebsy
Fermentation Fiend
Arguably the zx works fine wirelessly as is. @kimura uses his wirelessly and loves it. Iirc He takes a few small puffs on each bowl. I have been using my z8 wirelessly recently. It's bead chamber is slightly taller but I don't think there is much more media compared to the zx. I have an annoying habit of always filling a bowl, if I'm restrained I don't quite fill the bowl and the z8 works great because it's all done by the time I've finished pulling. If I've loaded too much I'll pop the head back in the coil for a little while before I do the clean up. Loading less is a recent thing I'm trying to get in the habit of. Having said that, lol, I can't wait for the big zxxl loads when it's ready. Also, I know Ryan could (has?) optimise(d) the zx for wireless and that will definately be more flexible in the way it can be used.
greenganja
Well-Known Member
That is good to know.I can increase the heat retention of the ZX incredibly easy
#weinnovate
JT-Shawk
Member
Yeah I think even the current ZX build does pretty well considering I've seen some of the other brands who almost run out of heat just hooking the heater to the bowl
I've got more zirconia bowls on the way for anyone trying to make the pairing
Although I do wonder if there's enough real interest left in offering a wireless ZX with these other options available now.
What do you guys think?
The ZXL re-release is looking like it might not happen unless the steam picks up a good bit.
In other news I received an initial quote on my new wireless stand design this morning and I'm liking this one quite a bit, I think it's a pretty cool rendition.
I worked on a reiteration for a while this morning that I'm liking, I will re-submit that for an updated price and if it comes out good I'll post that here for everyone to check out
Fearless Disaster
Well-Known Member
Hello! I have been experimenting with the z bowl in the middle position. do you all run the same temperature at the small and middle bowl positions? I use 565F right now for the top bowl position and i'm noticing it takes more pulls to clear the bowl in the middle position and am wondering if you all turn up the heat?
add1noob
Well-Known Member
I usually keep the same temperature, but I only use the middle position when I want more of a “session” compared to one quick rip with the top position. Sometimes I crank it up 10-15 or 20 degrees if I’m adding concentrate to get closer to one hit extractions with the middle position.
howie105
Well-Known Member
In my experience, every time I change the screen position in the bowl, I usually need to adjust the temp by about 10–20°F to compensate. That said, shifting the screen often ends up affecting more than just temp — things like heat soak time, how the bowl’s packed, and even draw speed can all come into play too.
The temp on the screen doesn't mean anything, always adjust to match your desired outcome.
BeltedCoyote
Well-Known Member
The temp on the screen doesn't mean anything, always adjust to match your desired outcome.
Sultana lungs
Well-Known Member
I’m in for a zx off the leash
mr.blue
Well-Known Member
Can’t speak for everyone, but I would be very interested in a wireless ZXI've got more zirconia bowls on the way for anyone trying to make the pairing
Although I do wonder if there's enough real interest left in offering a wireless ZX with these other options available now.
What do you guys think?
The ZXL re-release is looking like it might not happen unless the steam picks up a good bit.
In other news I received an initial quote on my new wireless stand design this morning and I'm liking this one quite a bit, I think it's a pretty cool rendition.
I worked on a reiteration for a while this morning that I'm liking, I will re-submit that for an updated price and if it comes out good I'll post that here for everyone to check out
Alligator427
Well-Known Member
ZXL work with the CH PID ? Wick kind of stand for it ? CH hangar sit post work ?