Camouflet Ceramo XL

hotmeals

hotmeals

Serial vapist
stonedBBer said:
What forge settings did you use ?
Click to expand...
I think I had it set to 1200J, 73%, Cascade mode, but I only heated it once because it pulled the cap off. I hit it upright while the cap was loose and it didn't produce any visible vapor, then I pressed the cap back on and finished the bowl with a torch.
 
hotmeals,
TigoleBitties

TigoleBitties

Big and Bouncy
I had some very nice sessions with the Ceramo yesterday and I think I may have dialed in my heating with the Wand. The Vaphit glass intercooler is really great at taming the vapor natively and it'll be my solution for native hits although I have to be really careful of the fragility. With 15 flashes from cold I can get a one hit extraction with a perfect brown roast and great flavor.

I did hear a bit of squealing again during the heat cycle but the cap stays on, perhaps because I always lean the Ceramo against the side walls of the Wand's glass to keeps my hands more steady. The hits are big and airy. I used it as a WPA again later in the day with great results too. Overall I'm happy with the new addition.
 
Z

Zagala

Well-Known Member
I received mine just a few hours ago. I am very happy as it came in perfect shape with no visible scratches, deformations or any other things to be concerned. And after using the tool to fix the loose cap on the ceramics and adding a Simrell mouthpiece with intercooler and spiral I gave it a try with Wand but went less than 15 flashes and had 2 heating cycles instead. I guess I am lucky and cannot complain. I have too many of these vapes but I think that I like it and it will probably become among those I use more regularly. I am sorry for those who have had some challenges, and I do agree with many of the observations for improvement in many aspects, but I am happy with the Camouflet products I own including the CXL, injector and inductor. I did also receive the super cap, and it works nicely with the CXL where it will likely stay.
 
Eloh

Eloh

Active Member
i have to say, i had some good sessions with the ceramo with the super cap and the ceramic cooler and a torch.
One heat extractions work pretty well and with a little cautiousness while drawing the heat is managable... The taste and highs are very good and it offers some cigar like puffing that way.
 
Camouflet

Camouflet

Well-Known Member
Manufacturer
hotmeals said:
By the way, while copying that I noticed this:
The spacious ceramic chamber is easy to load and does not interact with induction heaters, ensuring a truly pure convection experience. Its polished interior allows for quick unloading and hassle-free cleaning.
On my Ceramo, only the exterior appears to be polished. Doesn't seem like a huge deal but it is a discrepency.
Click to expand...
The interior of the Ceramo XL chamber is polished to a smooth finish, while the exterior is high luster gloss for aesthetics. Due to the complexity of the internal geometry, the interior polish is not as reflective as the exterior, but still provides a clean, functional surface.

someTooL said:
So are people receiving the super caps now?

I was told last week that my preordered cap that was missing in my shipment would be delayed until more arrived?
Click to expand...
Quick update - The shipment of Super Capacitors is almost at the warehouse! The shipping courier's estimated delivery was scheduled for today but it has been updated to tomorrow. Once they arrive at the warehouse orders will be packed and shipped ASAP!
 
hotmeals

hotmeals

Serial vapist
Camouflet said:
The interior of the Ceramo XL chamber is polished to a smooth finish, while the exterior is high luster gloss for aesthetics. Due to the complexity of the internal geometry, the interior polish is not as reflective as the exterior, but still provides a clean, functional surface.
Click to expand...
I see, thank you for clarifying that. I figured the interior was more difficult to polish. Customer support did say they will send me a replacement stem, so hopefully that solves my cap fitment issues.
 
M

Millerbr310

Well-Known Member
My inductor pulls off my ceramo stainless cap. The friction screen on my device also won't stay put and I actually pulled vaporized product directly down my throat when it failed. The quality of the ceramic on my device is all chipped and scratched around the mouthpiece even some on the stem. I have contacted camouflet and they said chips was a natural part of the manufacturing process and that the mouthpiece will just look like that and it is normal to them. They offered me another cxl or a 20 dollar credit which I am going to take another cxl. Cleaning and shipping back my device this weekend.
 
Last edited:
TigoleBitties

TigoleBitties

Big and Bouncy
I've had good results with my Wand still although there was one time it pulled the cap off. I'll just tighten the fins a bit maybe but it hasn't been an issue. I like hitting it natively (with glass spiral and mouthpiece) for the first hits as they're really tasty. Great airflow. Then I pop it on a dry rig for the last hotter hits. Here's a few pics.
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
 
T

Texus

Well-Known Member
Super Capacitor and Ceramo arrives today! I see some Forge recs above for regular cap, anyone use it with the Super Capacitor with settings that nailed it?

And what about recommended Voltage on the Inductor?
 
Texus,
  • Like
Reactions: someTooL
hotmeals

hotmeals

Serial vapist
Texus said:
Super Capacitor and Ceramo arrives today! I see some Forge recs above for regular cap, anyone use it with the Super Capacitor with settings that nailed it?

And what about recommended Voltage on the Inductor?
Click to expand...
If you mean the settings I posted, those weren't really a recommendation, I only posted them because I was asked. I had just hijacked one of my presets and turned the joules down to be sure it wouldn't be too hot and to test if it would pull the cap off. I'm pretty sure the Super Capacitor won't fit in the Forge since the regular cap only barely does, I haven't actually checked though.
 
hotmeals,
tasticleeze

tasticleeze

Steward of the Garage
TigoleBitties said:
I've had good results with my Wand still although there was one time it pulled the cap off. I'll just tighten the fins a bit maybe but it hasn't been an issue. I like hitting it natively (with glass spiral and mouthpiece) for the first hits as they're really tasty. Great airflow. Then I pop it on a dry rig for the last hotter hits. Here's a few pics.
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
ibb.co

image hosted at ImgBB

Image image in Lmcphha's images album
ibb.co ibb.co
Click to expand...
I almost feel like we need a and classification — apparently the temp or result can be different if inserted from top or bottom.

Like twand or bwand classification maybe
 
b0

b0

Cloudy...
Got mine today, the flavor this thing gives is amazing :freak:

Tested first with the regular cap and just had my first bowl with the Super Capacitor. I have to test it more, but I can tell you this thing slaps and it's one of the best flavour TEDs I've tried.
 
someTooL

someTooL

Well-Known Member
Got my SC earlier this week and finally had a chance to try it with the Ceramo. We’ll, first time trying the Ceramo too.

Had to adjust a little but got a tight enough fit to accomplish the goal but still not as comfortable as I would like to be. With the smoothness and unevenness of the Ceramo bowl material I’m not expecting much more but something too keep an eye on.

Used the Inductor at my Anvil voltage of 24.4 for a quick 5-7 seconds on the top only. 1st attempt was very lite roast but enjoyable and effective. Super even roast too. Much more experimenting needed but overall enough of a signature difference to keep going.
 
D

Dopamine

Well-Known Member
someTooL said:
Got my SC earlier this week and finally had a chance to try it with the Ceramo. We’ll, first time trying the Ceramo too.

Had to adjust a little but got a tight enough fit to accomplish the goal but still not as comfortable as I would like to be. With the smoothness and unevenness of the Ceramo bowl material I’m not expecting much more but something too keep an eye on.

Used the Inductor at my Anvil voltage of 24.4 for a quick 5-7 seconds on the top only. 1st attempt was very lite roast but enjoyable and effective. Super even roast too. Much more experimenting needed but overall enough of a signature difference to keep going.
Click to expand...
I’ve been going 27.0 for 4 full rotations of the cap. Pretty quick four count.
 
TedJones

TedJones

Well-Known Member
Just got my SC as well. Saved combustion on the first try and took it easier on the second. Awesome upgrade, great signature! The mag sink for the TA works on it like a charm ;) Fit my XL perfectly, until I dropped the cap with mag on the floor bending up a few fins :doh: I’m more cautious at 22.5 for about 8-10 seconds for now.
 
You must log in or register to reply here.
Top Bottom