Healthy Rips FURY 3

Hi All!
NEW DEVICE! HEALTHY RIPS FURY 3
Our most portable device just got better!

Our FURY 3 is the same size as our previous FURY EDGE with the following upgrades:

• TITANIUM CHAMBER
• MORE POWER: 30%+ LARGER HEATING ELEMENT
• XL GLASS COOLING STEM INCLUDED - LENGTH: 3”
• DOSING CAPSULE INCLUDED
• NEW COLORS - BLUE, GREEN, & DARK GRAY

KEY FEATURES:

• PASS-THROUGH CHARGING (USE THE DEVICE WHILE CHARGING)
• LONG BATTERY LIFE OF 70-85 MINUTES PER CHARGE
• SLIDING MOUTHPIECE WITH MAGNETIC ATTACHMENT
• SILICONE TRAVEL COVER INCLUDED
• TEMPERATURE RANGE: 280°- 430°F

OTHER FEATURES:

• CONVECTION HEATING TECHNOLOGY
• HAPTIC FEEDBACK
• 3 CLICKS ON/OFF
• 1 CLICK BATTERY CHECK
• OLED DIGITAL FLIP SCREEN
• ADJUSTABLE 3-7 MINUTE SESSION TIMER
• PRECISION TEMPERATURE CONTROL
• ~20 SECOND HEAT-UP TIME (NEAR ON-DEMAND VAPOR)
• USB-C FAST CHARGING (5V/1.5A)
• CHARGES IN 75-90 MINUTES
• PROVIDES APPROXIMATELY 70-85 MINUTES OF BATTERY USE PER CHARGE

*ALL PARTS AND ACCESSORIES ARE 100% COMPATIBLE WITH OUR FURY EDGE

Available now HERE.

All the best!

Healthy Rips Team

Got my Fury 3 today. I was still using my Edge daily. It has served me perfectly since I got it when it first came out. I can still get several sessions between charges but am looking forward to more with the F3. My Edge is still perfectly functional and I'll find a place for it to continue to be useful.

Absolutely love the look and feel of the new exterior. Gotta get used to the sliding mouthpiece as I've tugged on it the wrong way a couple of times.

I topped off the battery to full. Didn't do any burn offs; didn't find anything offensive enough to make me think it needed one. Did a single 3 min. session. I never do a full 3 min. session with my Edge but I wanted to compare 3 new stems. The dimpled short stem makes the F3 completely concealable with one hand, totally discrete. But no way I could handle the heat of the vapor, as much as the stealth factor appeals to me. Quickly swapped it out for the 3" stem. Not as hot but still too hot for me. To mitigate the hot vapor with my Edge I used the water tool dry which worked well. But I picked up the baller stem for the F3. It's a little taller so cuts into the stealth factor but dang it makes the vapor heat unnoticeable. Impressive. With the 3 min. session I got vapor the entire time. The pic shows the two devices with different stems with half a F3 chamber of Alaskan Thunder. Looking forward to my next session

I'm super excited I got my Blue Fury 3 today, full review later after I spend some time with it!

Wanted to let everyone know 2 big changes with the Fury 3 over the Fury Edge I haven't seen mentioned yet:
NO RATTLE!!!
Also, it doesn't count down in SECONDS anymore, now in MINUTES!! It appears to be set for a 5 min session out of the box, and will countdown from 4 :30 it appears.

Second burn off happening now, it appears all the robot farts are going away!

Got Rogue2's baby brother today, the Fury3.
Except smaller case size, smaller battery size, and smaller oven bowl size (1mm smaller), The Fury3 IS THE ROGUE2 in every way.
what a beautiful blue clear coated beastie vape!
btw- I think the Fury3 heats up about 2 or 3 sec faster.
i gotta say HR, you guys knocked the Fury(3) upgrade out of the park lol
fits in my purse and jeans pocket with room to spare

lovely tasty vapor at 390f using their glass ball stem attachment

seedy53 said:

Got Rogue2's baby brother today, the Fury3.
Except smaller case size, smaller battery size, and smaller oven bowl size (1mm smaller), The Fury3 IS THE ROGUE2 in every way.

Click to expand...

It definitely has a "Rogue 2 Mini" vibe to it!!

of the session timer settings are different between the fury3 and rogue2. rogue2's max time is 8 mins and the fury3 is 7 min max. that makes sense cause f3 has a little smaller bowl.

I'll have pics and a bit of a review up soon, but I got my Fury 3 yesterday and it's blowing me away. I'm honeymooning hard and fast with it, and can now see why the HR products have always been so well received.

Got my Fury 3 on Friday. Spent some time with it all weekend lol, especially on the lake. I've had a Fury Edge and Fury Edge SE, and they've been phenomenal. The Fury 3 is definitely a big improvement. I never had Rogue 2. I was going to get one but then the Fury 3 came out lol.

Anyway, love the new heating element. First hit always produces vapor for me now at 375. Also, counting down in minutes/seconds is a nice touch. Also love the silicon cover as I hated not having one for my Edge SE that would fit the glass stem. Fast charging and pass through is also nice to have. Like I said, a big step up from the Fury Edge SE even though it still looks the same.

The improvement to the heating element alone is worth it to me. Seems to have a more honest temperature gauge as on that first hit, I can feel heat and get a nice cloud. Before I'd have to take a hit or 2 to get it going. No need to do that anymore. Definitely performed well out on the lake and helped catch a few bass lol.

I am having a repeatable issue, wanting to see if anyone else if having a similar issue:

My Fury 3 keeps changing the temp back to 356 and a 5 min session when I have been using at 365 & 374 100% of the time with 7 min sessions. It seems to happen when the battery goes to 1 or 2 bars and is not used for a bit after. Today's example was I used it at 374 for full session at 7 min, let it power off (this was at 3PM) and I just came home and used now (11PM) and it powered up only to 356 with a 5 min session.

EDIT: Just powered up again after that session at 374 and 7min, and bang, 356 and 5 min again. 2 bars left on battery still

UPdownLoAD said:

I am having a repeatable issue, wanting to see if anyone else if having a similar issue:

My Fury 3 keeps changing the temp back to 356 and a 5 min session when I have been using at 365 & 374 100% of the time with 7 min sessions. It seems to happen when the battery goes to 1 or 2 bars and is not used for a bit after. Today's example was I used it at 374 for full session at 7 min, let it power off (this was at 3PM) and I just came home and used now (11PM) and it powered up only to 356 with a 5 min session.

Click to expand...

did you charge it before using again?
first i heard of this issue, contact HR for advise.
i know those control buttons are easily pressed if you expose the buttons to your fingers. i put button side to heal of my palm low on it's frame. hold it lightly or it will press those buttons also esp. in any tight grip

F2 is probably the vape I have used (and enjoyed) the most, are mouthpieces from f2 compatible with F3? I prefer the standard original non glass mp for being shock proof. So sad to see that even the silicone cover is modeled after the glass mp and that plastic mp is not even anymore on catalogue.

justcametomind said:

F2 is probably the vape I have used (and enjoyed) the most, are mouthpieces from f2 compatible with F3? I prefer the standard original non glass mp for being shock proof. So sad to see that even the silicone cover is modeled after the glass mp and that plastic mp is not even anymore on catalogue.

Click to expand...

you can buy the travel mouthpiece for the rogue 2 cause i got one and filled it with 4 mm and 5mm rubies, i think. lol
it works better than the long glass tube mp- cool tasty draws. wonder if there is a travel mp for the fury3. they have it for the fury3 too. fury edge se will fit furry3

Travel Mouthpiece $20.00​

justcametomind said:

are mouthpieces from f2 compatible with F3?

Click to expand...

Hmmm. I think I have a Fury 2. It's the smallest version of these Fury/Edge/Rogue vaporizers and a modest upgrade over the og Fury, iirc. Very handy indeed and if it weren't for the Edge (a rebranded/upgraded/size increased Fury 2) I'd probably have used it a lot more. After the Edge came the Edge with the travel mouthpiece and maybe another minor upgrade or two but nothing that made me want to go for it. The mouthpieces from the og Edge does not work with the Fury 3 but the mouthpiece from the upgraded Edge works with it. The 'Fury' 3 name harkens back to the og Fury brand name but is in the grand scheme of things an upgraded Edge. I took HR up on this upgrade because I've had my og Edge for so long I want to let it enjoy the sunset a little.

I picked up the cooling stem with the beads in it and it works very nicely. Cools the vapor significantly and allows for huge hits I would imagine. I don't do huge hits so that upgrade isn't suiting me perfectly. I'm finding the water piece attachment from my Edge (compatible with Fury 3 of course) to be more comfortable. It diffuses the vapor a little differently than the cooling bead stem.

seedy53 said:

you can buy the travel mouthpiece for the rogue 2 cause i got one and filled it with 4 mm and 5mm rubies, i think. lol
it works better than the long glass tube mp- cool tasty draws. wonder if there is a travel mp for the fury3. they have it for the fury3 too. fury edge se will fit furry3

Travel Mouthpiece $20.00​

Click to expand...

do you happen to have a link for that?

Flotsam said:

do you happen to have a link for that?

Click to expand...

yes sir https://www.healthyrips.com/store/p77/Travel_Mouthpiece.html