TinyMight / TM 2

RustyOldNail

RustyOldNail

SEARCH for the treasure...
Vaporific said:
3.52 showed on my digital Nitecore for one of my older batteries. This was after perhaps 3 loads and then it was depleted. I don’t have a dedicated DMM unless it’s the same as what my Nitecore displays
Click to expand...

Using voltage readings is very approximate but gives you another clue. The fact that you’ve noticed fewer bowls means that batteries voltage is getting lower faster as it’s having trouble supplying tha amperage needed. I forget, but believe the “low voltage cutoff” of the TM is 3.3 volts. After a load is removed from a lithium the voltage will go back up a bit, as you have noted after removing it from the TM and then inserting on your digital charger, voltage came back up a bit, but under load this battery can no longer deliver. The better tools for knowing a batteries heath are AC resistant and DC resistance meters, some crude DC ones are built into chargers, but this is beyond most users interest.

However a decent DMM will be a lot more accurate then most voltage readings on inexpensive chargers (a lot due to the spring charger contacts), but a DMM can be useful around the home, continuity testing, reading home AC outlets, etc.
 
VaPeD&CoNfUsEd

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
SolidAirrr said:
I'm pretty sure someone posted in here to have successfully replaced the glass with a metal tube... Unfortunately don't have it bookmarked though.
Click to expand...
I bought mine from a member here and it has a stainless steel liner not glass. I didn’t know they were supposed to be glass. Mine works well. The stem does wobble a bit tho. The o-ring seals tight but the end closest to the heater moves around a good bit. Do they wobble with the glass liner as well?
 
VaPeD&CoNfUsEd,
T

TimeBomb0

Well-Known Member
VaPeD&CoNfUsEd said:
I bought mine from a member here and it has a stainless steel liner not glass. I didn’t know they were supposed to be glass. Mine works well. The stem does wobble a bit tho. The o-ring seals tight but the end closest to the heater moves around a good bit. Do they wobble with the glass liner as well?
Click to expand...
Do you mean the glass liner in #4 of the pic @ https://fuckcombustion.com/threads/tinymight-tm-2.44563/page-645#post-1670875? The glass liner goes around the metal liner. You'll want that, and can getT cheap replacements from the official tinymight store.
There's a tiny bit of wobble if you manhandle your stem but pretty mild and not problematic at all.
 
Siebter

Siebter

Less soul, more mind
VaPeD&CoNfUsEd said:
I bought mine from a member here and it has a stainless steel liner not glass.
Click to expand...

Maybe you are talking about two things here, because the TM has both: a) a metal tube (aluminum in my device, not sure if the company switched to steel as default) and b) a glass liner that you should see when you remove the metal tube. I don't think that has ever been made out of metal, but I might be wrong. For a very short time the TM crew offered a glass liner instead of the metal tube for those worried about aluminum, but they cracked very easily and were removed from the store quickly.

VaPeD&CoNfUsEd said:
Do they wobble with the glass liner as well?
Click to expand...

Yes. It's wise to have a bit of play when glass is involved.
 
Sidvicius

Sidvicius

....
however also from the official TM site for TM2 it gives you different options for stems etc .. but not on wood, maybe but I say maybe I don't know other "colors" of wood will be marketed later?
 
Sidvicius,
cannasoor

cannasoor

Well-Known Member
SolidAirrr said:
there's a new TM story(-vid) on IG showing lots of different devices and their wood variations 👀 which are quite different, making it even more exciting which one you'll get :popcorn:
Click to expand...

Any way to link to the story(-vid)? I tried to create an Instagram account just to see it, but they refused to allow it.:shrug: And I don’t seem to be able to see it without an account … so maybe I am just outta luck?
 
cannasoor,
  • Like
Reactions: LesPlenty
Abele Rizieri Ferrari

Abele Rizieri Ferrari

Well-Known Member
cannasoor

cannasoor

Well-Known Member
D

Danez4twenty

Active Member
cliffhanger1 said:
I am thinking the best way to get the TM2 next week will be to buy from the Maker in Finnland.
I think no shops or maybe a few (i do not know) can ship it out on 09.06.
I was chatting with LCV from france, they told me no shops has already the TM2 yet. They closed the selling because they didn't even know if they were even allowed to start selling.
I ordered from other shop in France but now i think i will not get it next week. :(
Click to expand...
Vgoodiez is the only merchant fulfilling US orders, no matter who you purchase from and he said it would be at least a week later for shipping.
 
Danez4twenty,
FelixVonTrapp

FelixVonTrapp

Well-Known Member
Danez4twenty said:
Vgoodiez is the only merchant fulfilling US orders, no matter who you purchase from and he said it would be at least a week later for shipping.
Click to expand...
Speaking of which, for those who may not be borderline obsessively checking website, vgoodiez has posted his TM2 page. It sure is pretty in walnut IMHO

vgoodiez.com

Tinymight 2 by Tinymight

The successor to the original Tinymight, the Tinymight 2! Improvements include: -Multitool -New anodized finish, less prone to scratching -Improved battery lid -Improved button -Improved temp dial -USB-C fast charge -More robust construction -Shows battery level visually -Updated heater control...
vgoodiez.com vgoodiez.com
 
VaPeD&CoNfUsEd

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
TimeBomb0 said:
Do you mean the glass liner in #4 of the pic @ https://fuckcombustion.com/threads/tinymight-tm-2.44563/page-645#post-1670875? The glass liner goes around the metal liner. You'll want that, and can getT cheap replacements from the official tinymight store.
There's a tiny bit of wobble if you manhandle your stem but pretty mild and not problematic at all.
Click to expand...
Yeah, mine doesn’t have the glass or the print pictures there. Would have been nice to know I’ve been missing parts this whole time I’ve had it. 🙄. It does seem to work well still though.

Never mind, I’m an idiot. I just took a closer look. Mine has a glass liner. Damn I guess I need to set this thing down for a minute before I go running my mouth. Lmao
 
cliffhanger1

cliffhanger1

Well-Known Member
GoGlass said:
Nope. I order from a french shop who had a little quantity of TM2 (already out of stock).
Click to expand...
I ordered there too. But they said they never had it in stock. Around 10-15 Sept. But they closed the pre ordering which says now out of stock.
 
cliffhanger1,
Jill NYC

Jill NYC

Portable Hoarder
Marlox said:
Whats that screws size again?
Click to expand...
I don’t know the right way to measure a screw (stop right now!), but here are a couple of pics in millimeters:
3460-FB4-A-9576-4-B81-82-CE-75-FFAF16-FB8-D.jpg

3276-B867-4685-4-DDF-8228-79-C2874-D315-E.jpg


Hope it helps!
 
SirGanjaVapeAlot

SirGanjaVapeAlot

Well-Known Member
Has anyone tried both the 4 pill and 6 pill High Artisan stems and can tell me on a scale of 1 to dumbass VAS if it makes a difference? He had an XL stem In our national flags colors and I couldn't say no while I was buying a mouthpiece 🤣☠️
 
S

sickmanfraud

Well-Known Member
Abele Rizieri Ferrari said:
TRWW has that with most TM stems made in the glass, narrowing at the mouth. He also sell a attachment that's pretty fly if you search "tiny might". It has a titanium intercooler I believe, don't think it's removable.
Click to expand...

You are a Genius! I searched every item (it seemed like every item) in TRRW looking for this tip that was mentioned over a month ago. I searched "tinymight" not "tiny might". Thank you very much.

As far as the wood tip from High Artisan, I was unimpressed. It doesn't fit well at all. For $30 it should fit well. Mine does not.

Siebter said:
Have a look at the Ditanium mouthpiece. Works excellent, but you'll need to find o rings that make it fit right.
Click to expand...

I ordered a Ditanium tip after I saw the video from @VGOODIEZ . I figure that since it fits inside the stem it needs to be the same size as the cooling unit. With that in mind, I expect the o-rings from the O-ring pack should work fine.

@VGOODIEZ were the o-rings from the o-ring kit satisfactory?
 
Last edited:
You must log in or register to reply here.
Top Bottom