Skinku

Well-Known Member
I really fancy a stinger, combined with a M stem would it provide a similar experience to the Vortex?
I would pay Ā£65 for it I think.
 

stark1

Lonesome Planet
Well, you could do better.
A spiral cooler in a DV condenser would
Lower the BAR.
The tab may be problematic, however.

Should work with Tectonic. It, like the Simrell has a ledge-like LIP, while both the SS, and the M do not.

While that sucks for the M, a possible solution is to put the spiral Vortex tab on the mp end....

But you were speaking about the Stinger. i digress.
Regardless, the engine that powers the vortex is the intercooler, you still cant have the tab facing the tip in an M.

A waste of Ā£66? Plus postage.

Works on a Tectonik. Hawt diggity!
Franky, wait up!
 
Last edited:
stark1,

Smokey McVape

Well-Known Member
Well, you could do better.
A spiral cooler in a DV condenser would
Lower the BAR.
The tab may be problematic, however.

Should work with Tectonic. It, like the Simrell has a ledge-like LIP, while both the SS, and the M do not.

While that sucks for the M, a possible solution is to put the spiral Vortex tab on the mp end....

But you were speaking about the Stinger. i digress.
Regardless, the engine that powers the vortex is the intercooler, you still cant have the tab facing the tip in an M.

A waste of Ā£66? Plus postage.

Works on a Tectonik. Hawt diggity!
Franky, wait up!
The Stinger condenser is wider than the DV standard and XL which helps with cooling. Haven't tried the Stinger spiral in a DV condenser yet, will try later and update.
Also the Stinger condenser tube can be extended as it has a slide fit into the mouthpiece meaning you can extend by about 8-10mm if used with longer aftermarket stems.
 
Smokey McVape,
  • Like
Reactions: Summer
Do you have a code for that?
I asked Gerg(DynaBox) directly and he wants to have for the micro ih 79ā‚¬ instead of 75ā‚¬.
Sorry that I reply so late..
Had some problems lately.
Yeah, i think it was 79 for the micro and 75 for the mini. But dunno exactly.
Anyway my Dynabox Micro arrived and it's way above Indy in terms of build quality.
And the size. There's almost no real size difference, but the Box is a bit heavier though.
And the switch, which I thought would be a - for me..is no big deal since you can let the M rest inside the tube and use only 1 hand for the switch.
And it just feels durable and well made.
Indy feels very cheap and empty inside + my switch broke after 3 days.

P.s
 
Last edited:
Just wondering if you had to pay any extra surcharges, if you are in UK?
I dunno honestly.
Write to Dynabox on FB or Instagram and he'll help you.
Btw just realized that the adapter it came with is 12v 8a and honestly the coil is a bit too powerful for my liking. I use 2019 SS tip though, cause I prefer it.
And guess what. I have the almost identical adapter from the Indy, which is 12v 6a and it works like a charm for me, powering the coil exactly as much as I want it to.
Was so happy about this, that I had to share !
Peace.
 

stark1

Lonesome Planet
While some of you boys across the pond are playing with your Indys, and Dyynaboxs,
Some (a few) of U.S. are waiting for mail notification of the (ā€œahemā€) Alpine 2021
On this side.

A little iffy in QC last year, it is a self contained IH. A boxlike affair as well, but a
Pretty box.

For the pre-launch price, I couldnā€™t resist (only one delay, so far). LMFAO



 
While some of you boys across the pond are playing with your Indys, and Dyynaboxs,
Some (a few) of U.S. are waiting for mail notification of the (ā€œahemā€) Alpine 2021
On this side.

A little iffy in QC last year, it is a self contained IH. A boxlike affair as well, but a
Pretty box.

For the pre-launch price, I couldnā€™t resist (only one delay, so far). LMFAO



What was the prelaunch price?
Now it's 120 $.
I understand what you mean, since every time I need something from U.S (being from EU) I think about VAT and expensive shipping.
Although it was more profitable to order the Newvape Flowerpot directly and not from Vapefiend, that was a 600 bucks thing.
Not a usual purchase.
The Dynabox is amazing build quality for it's price imo and I've seen couple of IHs.
It just feels durable and well made.
Like 90 euros with shipping for full price.
(But for US probably a bit more shipping + VAT which is 20% i think, making it ~110-120)
And i really love the wood looks + it's super small. + I can power it with batteries as well.
Indy is a very cheap thing, honestly.
Don't even get me started on that.
Yeah, it gets almost the same job done in the end.
It's just mine did it's job for 2.5 days prior to dying. I will ressurect it someday, maybe..

P.s Alpine 2021 looks so good, although isn't 1000 mah just too little juice ? 3x good 18650 = 9000 mah / 3x 21700 = 12000 mah.
Just saying..
 
Last edited:

Bologna

(zombie) Woof.
What was the prelaunch price?
Now it's 120 $.
I understand what you mean, since every time I need something from U.S (being from EU) I think about VAT and expensive shipping.
Although it was more profitable to order the Newvape Flowerpot directly and not from Vapefiend, that was a 600 bucks thing.
Not a usual purchase.
The Dynabox is amazing build quality for it's price imo and I've seen couple IH.
It just feels durable and well made.
Like 90 euros with shipping for full price.
(But for US probably a bit more shipping + VAT which is 20% i think, making it ~110-120)
And i really love the wood looks + it's super small. + I can power it with batteries as well.
Indy is a very cheap thing, honestly.
Don't even get me started on that.
Yeah, it gets almost the same job done in the end.
It's just mine did it's job for 2.5 days prior to dying. I will ressurect it someday, maybe..
See if "WAVE4" still works for 40% off... :peace:

Alpine 2020/2021 - Induction Heater
 

stark1

Lonesome Planet
Donā€™t want Bologna to blow a gasket, but my pre-launch was slightly lower, so it was a no brainer.

the simpsons GIF
 

stark1

Lonesome Planet
Yup! yup!

All dumb. Lead. Brass, you name it!

Paint chips are soo-so sweet!

(Joking, I donā€™t actually use it, like String said, ā€œdogā€)

Idle stoners have to amuse themselves
Weed Drugs GIF

Oh. That reminded me. It was posted to ā€œglorifyā€ the Jan 6th Insurrectors FYI
 
Last edited:
stark1,

StringTheorista

Well-Known Member
Actually, Starkie, what I said (or emojiā€™ed), was dog *penis*...
in any event, glad to know that piece is merely decorative šŸ˜‰
 
Last edited:
StringTheorista,
  • Like
Reactions: stark1

Rab

Well-Known Member
Anyone notice the residue this thing can cause on the side of your bong/water piece compared to other vapes? Have yet to try it with another strain, but when milking up a bong with just one hit this thing can cause yellowish stuff to form on the side of the glass. I am assuming that it is simply becauase of how concentrated the vapor is with such little airflow, and might try an experiment with my DBV to see if leaving vapor inside a cleaned piece causes the same effect. I imagine it can be fixed with a change in heating technique but I'm interested to see if it is a common thing nonetheless.
 

Rab

Well-Known Member
Very interesting.. perhaps a water filter/adapter is more suited. Just to stop particles from flying into the back of the throat and giving less opportunity for condensation.
 
Rab,

maremaresing

Well-Known Member
I'd like to make note that while that is condensed vape, it's condensed vape *in one place*. If you do it without water, the whole piece gets a fine coating. So it's not like the water is robbing all of that. It was going to get robbed anyway, and that's ok, because it's very minimal.
 

Demonic chronic

Chronic Connoisseur. Butane powerāœŠšŸ“󠁧󠁢󠁳󠁣󠁓ó æšŸ‡ŗšŸ‡¦
Canā€™t say I notice much residue on my bong, then again I always clean my bong and Dynavap every 3.5g:lol:
 
Last edited:

RustyOldNail

SEARCH for the treasure...
Made this Gold Nugget stem today out of extra thick walled titanium. All texturing including the twist were hand carved, filed, and heat anodized. Works with the Omni XL parts, and fits in a Dynastash! (63mm long x 12mm diameter.) Gonna be sad to see this one go!


GOLD, GOLD, GOLD, you say.....
I know of an EX-President that would be extremely interested.... :)
 
Top Bottom