Multi-brand HEALTHY RIPS FURY

[BabyFacedFinster]

Classic ISO + Salt in a bag will clean it for sure, but I made stem milk with my WPA last time and It was wonderful, even had enough for 2, split a milkshake with my friend and we were having a great time.

Also been liking using the fury 2 glass accessories like its a 4 minute log vape like a few others on here

After having the WPA, Bubbler, and Glass MP for awhile, here are my thoughts on their usage and which one you might want to buy in your situation:

WPA is a must have if you have a water piece, it can double as a glass MP and is also just pretty sturdy from my experience. Don't have the XL but the WPA bowl size is perfect for microdosing. IMO, bowl size too small to pass around to more than 2 people and I feel that way of all the glass attachments rn.

Bubbler is useful for me when I want to show off the fury, or want a water session but dont want to carry a bong around (this usually isn't an issue for me though) I generally don't use it much nowadays, especially cause I've got quite a few water pieces. Bubbler itself is really nice, and if you dont have a water piece, you might consider getting this. WPA plus a water piece will win in most categories besides portability and size. Can't deny that it looks pretty cool though, also does a great job cooling the vapor and making it smoother, as expected a little flavor is lost.

Glass MP is great. For me, it improves dry sessions quite a bit for a few reasons. you get cooler, smoother hits as opposed to the native MP, giving you easier long draws/big hits. The flavor of the Glass MP is better in the sense that its more "pure", that is just from my experience. If you have the 15 bucks and the native dry sessions aren't quite doing it for you in terms of flavor and harshness, maybe consider getting one.

My only complaints are that they don't fit quite snug in the fury, though from what i'm seeing that may just be my fury, the bowl sizes are also a little small but definitely workable (waiting on you Mr. Fierce). WPA is definitely the best value here imo, you can use it as a glass MP, thru waterpipes, and it helps microdose. That being said, I'd buy the glass MP again should it ever break, and if you dont really like water filtration, you might consider getting this over the WPA, as it does feel like a considerable upgrade to dry sessions, even compared to the WPA.

Sorry again for another rant, just felt like typing out a little update on the accessories before I run some bank errands, have a good one guys.

I added my 14mm J hook to the wpa and you get some cool dry hits that way also.

Also, I can't remember which big box store I bought them in but many sell those little round brushes that the Fury comes with. Usually in the kitchen section where you would find bottle brushes. They are a bit longer, but brush section looks practically identical.

 

[Fat Freddy]

After receiving my third f2 about two weeks ago [this time they didnt make me rma either full disclaimer]...today again I have PROTECT flashing and then shut down.
I bought my first device Jan 30 and each device i have had since [x3] has lasted about two weeks on average. They keep telling me it is a 1% problem, although for me this is three in a row in less than two months. Very exasperating, this on top of never offering me a full refund unless explicitly asked and a mini tiff over that instance as well, just little inky dink things that stand out when you have three devices fail....I even n took some video this time

@HealthyRips.com
lets talk offline if we can but what is going on?
Is there a capacitive sensor attached to the bowl or a loose ground floating around behind the bowl, I can actually hear a clicking like the battery is overloading a component....havent dove in that far, could, as I maintain and build water quality equipment for the local watershed in my spare time....

I hate putting this here but I have stated it outside this thread, I bought one of these basically because e grasshopper was having heavy rma issues, but to be fair the fury 2 doesnt seem to have similar issues gauging by this thread, but I want to solve this, itbummed me out after the second device that it took me till now to log back in, just to stepback and think hopefully a lil more clearly,but here we are again..

ps after being asked to not share my experiences, which i have in a respectful manner, i will not consider another HR product, even if affects my refund.

last thing i have to say, hopefully that doesnt violate the thread, i wont be participating any more so that should also help future incidences...i wish all the best

You have had three Fury2's that flash "PROTECT" and then shut down on you? Given most user experiences that seems unusual to say the least. A true statistical outlier to be sure.

Have you received any dx at all from HR as to what may be the cause? What triggers a "PROTECT" signal generally? Overheating? Wiring fault? Did you ask?

Good luck!

.

 

[potriot]

You have had three Fury2's that flash "PROTECT" and then shut down on you? Given most user experiences that seems unusual to say the least. A true statistical outlier to be sure.

Have you received any dx at all from HR as to what may be the cause? What triggers a "PROTECT" signal generally? Overheating? Wiring fault? Did you ask?

Good luck!

.

yes. all three units. not ever a mention to the cause.
after a refund no worries.
i enjoyed them while they workeked and i suspect that the wpa is triggering the code after inserting or removing from e bowl, weird but all exact same symptoms and to their credit HR has done what the warranty is used for, but I am at a crossroads and think maybe its time to move on...

I hope you stay. This is a vape review site. Not all reviews are good. As long as you follow the rules you should be alright. If there are issues, I for one would like to know. My wife and I each have our own fury 2s, and so far they've been fine.

I just feel like I come here to complain and I never or rarely get to enjoy sharing something positive. Really, just a glum attitiude on my part, but it is a very pervasive attitude recently, lol

 

[HealthyRips.com]

Hi @potriot, Here at Healthy Rips, we take customer service very seriously. We make sure to always treat our clients with the utmost care, and we do all that we can to ensure that everyone is 100% satisfied with us and our products. If there is some other discrepancy you have with us, we would be happy to resolve it. As we stated in our email to you - we are issuing you a full refund and we are mailing you a return label since you do not have a printer.

We apologize and it is extremely odd that a single person would get more than one defective unit. The Protect mode is there to protect the vaporizer from various conditions that could potentially damage the vaporizer. We have been producing the FURY and FURY 2 for over a year - and out of the thousands that we have sold - we have a far less than 1% defect rate.

All the Best!
Healthy Rips Team
https://www.healthyrips.com

 

[shredder]

I just feel like I come here to complain and I never or rarely get to enjoy sharing something positive. Really, just a glum attitiude on my part, but it is a very pervasive attitude recently, lol

I'd be upset if I had 3 failures as well. Hopefully healthy rips will find the problem and make you whole.


Edit, sounds like healthy rips is taking care of it, good deal.

 

[NeedleNuts]

After receiving my third f2 about two weeks ago [this time they didnt make me rma either full disclaimer]...today again I have PROTECT flashing and then shut down.
I bought my first device Jan 30 and each device i have had since [x3] has lasted about two weeks on average. They keep telling me it is a 1% problem, although for me this is three in a row in less than two months. Very exasperating, this on top of never offering me a full refund unless explicitly asked and a mini tiff over that instance as well, just little inky dink things that stand out when you have three devices fail....I even n took some video this time

@HealthyRips.com
lets talk offline if we can but what is going on?
Is there a capacitive sensor attached to the bowl or a loose ground floating around behind the bowl, I can actually hear a clicking like the battery is overloading a component....havent dove in that far, could, as I maintain and build water quality equipment for the local watershed in my spare time....

I hate putting this here but I have stated it outside this thread, I bought one of these basically because e grasshopper was having heavy rma issues, but to be fair the fury 2 doesnt seem to have similar issues gauging by this thread, but I want to solve this, itbummed me out after the second device that it took me till now to log back in, just to stepback and think hopefully a lil more clearly,but here we are again..

ps after being asked to not share my experiences, which i have in a respectful manner, i will not consider another HR product, even if affects my refund.

last thing i have to say, hopefully that doesnt violate the thread, i wont be participating any more so that should also help future incidences...i wish all the best

That is so unlucky. Same problem each time? Must be from the same dodgy batch. I have one and 5 friends ordered on my recommendation and all are working fine. Bought at least 5 weeks ago.
I don't know much technically but could be anything to do with charging the battery? Could there be too much charge from your mains?
Just a guess

 

[little maggie]

yes. all three units. not ever a mention to the cause.
after a refund no worries.
i enjoyed them while they workeked and i suspect that the wpa is triggering the code after inserting or removing from e bowl, weird but all exact same symptoms and to their credit HR has done what the warranty is used for, but I am at a crossroads and think maybe its time to move on...


I just feel like I come here to complain and I never or rarely get to enjoy sharing something positive. Really, just a glum attitiude on my part, but it is a very pervasive attitude recently, lol

I'm glad you shared and hope you stay. I don't know why someone would tell you not to share since that's what FC is about.
I don't use butane anymore but if you do you might get a vapcap while you're waiting for your next vape. It's foolproof. I'm not clear if you're getting another replacement fury 2?

 

[TITANB324]

@HealthyRips.com may i ask the fury's chamber diameter/radius? Im opting to try and make a diy wpa and from my measurements its 10mm diameter (thus 10mm-10mm male to male adapter should snug on the end nigh?

 

[C No Ego]

yes. all three units. not ever a mention to the cause.
after a refund no worries.
i enjoyed them while they workeked and i suspect that the wpa is triggering the code after inserting or removing from e bowl, weird but all exact same symptoms and to their credit HR has done what the warranty is used for, but I am at a crossroads and think maybe its time to move on...


I just feel like I come here to complain and I never or rarely get to enjoy sharing something positive. Really, just a glum attitiude on my part, but it is a very pervasive attitude recently, lol

is there something going on with your power outlets that you charge the Fury from? maybe the adapter you plug the usb into? or did you use a car charger etc??

 

[HealthyRips.com]

@HealthyRips.com may i ask the fury's chamber diameter/radius? Im opting to try and make a diy wpa and from my measurements its 10mm diameter (thus 10mm-10mm male to male adapter should snug on the end nigh?

Thank you for your question! The inside diameter of the FURY 2 chamber is 11mm. Our glass pieces that fit snugly into the chamber are 10.7mm in diameter. The chamber does expand slightly when hot - so a 10mm male adapter would be a loose fit - but would work if you were able to create a seal at the top of the chamber. Contact us at healthyrips@gmail.com if you need a WPA - we can help you out

All the Best!
Healthy Rips Team
https://www.healthyrips.com

 

[C No Ego]

@potriot ... unless you got three fury vapes from a batch that was wonkie and it is the vape thts the problem- for charging the Fury and your possible power situation, any vape you end up with you might want to get a battery pack too and charge the pack first and then charge the vape from the pack... that way if your direct wall plug screws them up you will just possibly mess up the battery pack ?? odd man, have you tested your electrical outlets current? could lead to a Fire problem in your home etc...

edit- usually if its current the wall adapter would fry before the unit, even odder still

 

[blackwater]

Brand new FC member here but have been reading since 2015. Wanted to give a shout out to @HealthyRips.com for absolutely awesome customer service. I had a Christmas gift card for $100 and didn’t know how I could use it to partially pay for my new Fury 2. They hooked me up with a coupon code to partially fund the payment and I finished the transaction via PayPal. Used the 15% off coupon to get the Fury 2 bundle w glass WPA for $127. Fing awesome deal and customer service, thanks again @HealthyRips.com !!!

My daily driver has been a hopper for the last 2 years. Had 3 RMAs and need more reliability. Thanks to all of you people here giving your honest feedback. It has helped me make my decision a comfortable one. I can’t tell you how excited I am, using Christmas money makes me feel like I’m getting something from santa in the mail soon. Best wishes and Fury on!

 

[lookhigh]

Brand new FC member here but have been reading since 2015. Wanted to give a shout out to @HealthyRips.com for absolutely awesome customer service. I had a Christmas gift card for $100 and didn’t know how I could use it to partially pay for my new Fury 2. They hooked me up with a coupon code to partially fund the payment and I finished the transaction via PayPal. Used the 15% off coupon to get the Fury 2 bundle w glass WPA for $127. Fing awesome deal and customer service, thanks again @HealthyRips.com !!!

My daily driver has been a hopper for the last 2 years. Had 3 RMAs and need more reliability. Thanks to all of you people here giving your honest feedback. It has helped me make my decision a comfortable one. I can’t tell you how excited I am, using Christmas money makes me feel like I’m getting something from santa in the mail soon. Best wishes and Fury on!

Sweet hope you enjoy the Fury2 as much as i do, One of the most surprising vapes i have tried.

 

[StonerSloth]

yes. all three units. not ever a mention to the cause.
after a refund no worries.
i enjoyed them while they workeked and i suspect that the wpa is triggering the code after inserting or removing from e bowl, weird but all exact same symptoms and to their credit HR has done what the warranty is used for, but I am at a crossroads and think maybe its time to move on...


I just feel like I come here to complain and I never or rarely get to enjoy sharing something positive. Really, just a glum attitiude on my part, but it is a very pervasive attitude recently, lol

Sorry to hear that you're having a rough run with the Fury!! Three units is seriously bad luck!

I will say that my Fury 2 (from the very first batch) has seen a LOT of rough service and high temperature use and it is performing exactly as it was on day one with no issues at all. I have never once seen a "Protect" message. So I am pretty shocked to read that you had three failed units! It is just crazy.

The Fury2 is a really enjoyable easy-to-use vape that I would recommend for anybody... But in all honesty if I received three faulty units of ANY product I would probably not be revisiting for a fourth try....

 

[potriot]

Sorry to hear that you're having a rough run with the Fury!! Three units is seriously bad luck!

I will say that my Fury 2 (from the very first batch) has seen a LOT of rough service and high temperature use and it is performing exactly as it was on day one with no issues at all. I have never once seen a "Protect" message. So I am pretty shocked to read that you had three failed units! It is just crazy.

The Fury2 is a really enjoyable easy-to-use vape that I would recommend for anybody... But in all honesty if I received three faulty units of ANY product I would probably not be revisiting for a fourth try....

I still think it can hit hard like a mofo or soft like a whisper.
Lately I was using the oil pad and wpa together for monster bedtime / back ache rips and also been using extra screens from the blue silicone mouthpieces as a second screen when using the native mouthpiece.
I won't rule out a fourth.....

 

[StonerSloth]

I still think it can hit hard like a mofo or soft like a whisper.
Lately I was using the oil pad and wpa together for monster bedtime / back ache rips and also been using extra screens from the blue silicone mouthpieces as a second screen when using the native mouthpiece.
I won't rule out a fourth.....

Where are you putting the additional disc screens? In the bowl or inside the mouthpiece? How much additional drag to they create?

I run an extra SS mesh basket screen inside the plastic mouthpiece, but that's it. I use mostly the WPA's and bent glass stem, and I run those all by themselves with no screens. I actually have never used the oil pad either.

 

[StonerSloth]

Since part of my reply was deleted. It is always a possibility, but my wiring is solid. In fact the only other thing ever plugged into said outlet is my samsung phone which is going on 4 years on the same battery and using this oulet most of its life...I have very little ripple over or below 60hz and my pf is .99, doubt that wiring is my issue here.


I actually ran two at once and did not have any more drag than normal, let alone just a single, works good imho. I load them directly into the bottom of the chamber and load directly on top, this helps with cleaning as well..

The oil pad works pretty good for gooey and oil. I had only used the oil can w/ cap previous,which I didnt like with oil. The oil cans do seem to shine with some dry sift or some bubble though, dang...

I was running the native mouthpiece alot more too, maybe 80%, but when I first started more like 5% of the time, lol.

Are you saying you put the screens at the bottom of the chamber? Underneath the load?

I have built a few DIY convection vapes and one thing I have learned (through failure) is that the air flow path between the heater and the load is an extremely important aspect of vape design/heat transfer. You generally want only the bare minimum amount of screen between the heater and the load (unless it's there to condition the airflow in some way) since excess metal soaks up/wastes a lot of heat when it's right on top of the heater.

 

[potriot]

Ooh...do I have to have an amount of replies to post photos?

Yes, I totally get and myself model and design for resistance heat loads, so I understand your concerns. However, passive conduction will always exist in a setup like this with active convection surrounded by metal, these small screens rarely even get hot to the touch so imho it's a minute detail....
and if we are talking passive heat exhausting due to passive conduction and active convection me, I would want the exhaust to double back towards and over the heating element to eliminate passive convection.

 

[Stu]

If anyone else wants to help @potriot solve his outlier "protect" problem, please do so via PM. This issue seems isolated to him and him alone, so let's not bore future readers of this thread with this mystery.

Thank you.

 

[LesPlenty]

Ordered my Fury2 on March 23 and it has arrived in Australia a my door this morning, nice and quick. Charged it up, ran a burnoff (no hint of robot fart or degassing) went to put my xl WPA in and no go. The diameter of the WPA is 10.81mm and the Fury2 oven is only 10.7mm, Sent Healthy Rips a message through their contact page, will be interesting to see how they handle my problem.
Looks like I will have to try the stinky mouthpiece for now

 

[Skywalker_OG]

Ordered my Fury2 on March 23 and it has arrived in Australia a my door this morning, nice and quick. Charged it up, ran a burnoff (no hint of robot fart or degassing) went to put my xl WPA in and no go. The diameter of the WPA is 10.81mm and the Fury2 oven is only 10.7mm, Sent Healthy Rips a message through their contact page, will be interesting to see how they handle my problem.
Looks like I will have to try the stinky mouthpiece for now

Sup man, this might be a dumb question, but are you making sure you preheat the fury to temp before you put the WPA in? It was designed to only go in comfortably when the unit is hot and the oven expands to allow the WPA to fit. If you knew all this already and its really just a mistake then please disregard my comment.

 

[Fat Freddy]

Ordered my Fury2 on March 23 and it has arrived in Australia a my door this morning, nice and quick. Charged it up, ran a burnoff (no hint of robot fart or degassing) went to put my xl WPA in and no go. The diameter of the WPA is 10.81mm and the Fury2 oven is only 10.7mm, Sent Healthy Rips a message through their contact page, will be interesting to see how they handle my problem.
Looks like I will have to try the stinky mouthpiece for now

Have no worries; HR will take good care of you whenever you need assistance!


.

but are you making sure you preheat the fury to temp before you put the WPA in?

That's right, the Fury is a fancy femme who feels like foreplay first! Alliteration is optional.

.

 

[LesPlenty]

Thanks for the quick reply and advice Fat Freddy and Skywalker OG, I tried to insert the WPA straight after the initial burn-off (I was itching to try it through my bong), so it was hot. The WPA bowl is not quite round (10.79 to 10.82mm when spun in my digital calipers) and my F2 bowl is 10.69 mm.

 

[Skywalker_OG]

Thanks for the quick reply and advice Fat Freddy and Skywalker OG, I tried to insert the WPA straight after the initial burn-off (I was itching to try it through my bong), so it was hot. The WPA bowl is not quite round (10.79 to 10.82mm when spun in my digital calipers) and my F2 bowl is 10.69 mm.

Okey doke, just wanted to make sure, that is unfortunate, and @Fat Freddy is right, HR has great customer service they'll probably take care of you if theres a defect.

 

[HealthyRips.com]

Ordered my Fury2 on March 23 and it has arrived in Australia a my door this morning, nice and quick. Charged it up, ran a burnoff (no hint of robot fart or degassing) went to put my xl WPA in and no go. The diameter of the WPA is 10.81mm and the Fury2 oven is only 10.7mm, Sent Healthy Rips a message through their contact page, will be interesting to see how they handle my problem.

Hi, The WPA has a very precision fit - you must heat up the FURY prior to inserting the WPA into the chamber. Otherwise - it will not slide into the chamber. If your WPA is still not sliding in - let us know and we will ship you a looser fitting one: healthyrips@gmail.com

All the Best!
Healthy Rips Team
https://www.healthyrips.com