1. What does SSTB mean? See our glossary of acronyms.

Vaporblunt 2.0 & VB 2.0 DLX

Discussion in 'Portable Vaporizers' started by TherealVaporblunt, Nov 1, 2012.

  1. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    Absolutely. I'll have on sent today for you.

    As for MNIM question, I misspoke. The final renditions of the products were not completely done when I said that. The reason we didn't include Is that it would have raised the price and we decided not everyone would want it so we didn't want a forced buy. It would have made the vb2.0 come $274.99 instead of $249.99 if we included both PonGs. Instead we will sell PonGs that come packaged with both adapters. They also come with dlx and any individual water tool kits.
  2. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    We have had a very productive day in finding solutions to the EO cap. Please check out this video for a guide of how to use in its current condition.
    Egzoset and OF like this.
  3. ksmall

    ksmall New Member

    Messages:
    1
    I just bought this 2.0 DLX and does it medicate? OMFG YES it does... Cleanest medication I've ever tried. I'm using it with the new water tool, and levels 2 or 3 are where you want to be. One thing though, you get the best most amazing results when you pack it tight and to the max. Then you get the smoothest vapor hits... up to 6 of them for one full chamber. I own the original vapor blunt, the Iolite, and the Palm... All good vapes, but this model is the best yet... Hard to imagine a better experience.
    OF likes this.
  4. Soulhunter

    Soulhunter Well-Known Member

    Messages:
    155
    This looks like a big impovementfrom thefirst vaporblunt (witch i didnot like at all)
    Nice to see manufactorers who listens to their coustumers :) I think u hit thenail withthisone ;)
  5. OF

    OF Well-Known Member

    Messages:
    11,392
    Location:
    Left Coast
    I think you got that part just about right.....

    IMO the new Palm also shows some similar improvements. Very gratifying to see.

    OF
  6. Xchadb

    Xchadb Meltin pipe Glass Blower

    Messages:
    974
    Location:
    CO Springs
    i still kinda get confused on what it comes with, if i buy the package without the hydrotube, can i still use with 18mm connections?

    if not could someone direct me to what i need to buy to get the VB2.0 with an 18mm connection with herbs, thats all i care about.

    on puffitup it says the GONG/PONG whatever the fuck its called, connection is an "extra addon" but i dont see it for sale anywhere...
  7. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    Sorry for the confusion. The PonG adapter will be for sale individually packed. These packs come with one 18.8mm PonG for flowers and the oil adapter. We are currently waiting for the final touches to be done on these and they will be up for sale on our website and GV in about a week, two weeks at the latest.

    PonG adapters come included with all VB 2.0 DLX and individual Water Tools. Both of these items come with the flower and oil adapter included. The 2.0 dlx is up for sale on our website, and if the WT aren't up for sale yet they will be by tomorrow. Our website has been under repair trying to get all the new items up. Any more questions please feel free to contact me. Thanks
  8. Xchadb

    Xchadb Meltin pipe Glass Blower

    Messages:
    974
    Location:
    CO Springs
    thanks for clearing that up! so outa the box i can use all my water tools yay :)

    i REALLY need to pick one of these up, and when i do you'll see how long it takes this device to vapor box a car, how it handles snowboarding down the mountains, and many others, im so sick of not being able to use my portables with a small glass piece in the glovebox, if it IS possible with any portable, its the biggest adapter fuck fest bullshit hookup or its too hard to get a hit out of it, this simplifies everything with higher airflow yaaay :)
  9. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    I really appreciate all the comments we have been getting in the designs/functions. It's nice to see people arreciate our hard work. Without fishing for compliments, I would like to ask how you all feel about or customer service? Constructive criticism is an essiential feedback for us. Thanks, and happy hollidays
    newVaper420 likes this.
  10. Xchadb

    Xchadb Meltin pipe Glass Blower

    Messages:
    974
    Location:
    CO Springs
    well i have a lota respect for an owner that keeps on on the forums on here, cause if you don't, not really sure how you expect to reach out to the vape scene, we don't linger much other places but here mostly.

    cause im sure like most of us, if there is a problem we turn here, cause where else ya gonna go? the manufactures website for help? lol. right.

    all vapes require a little "instruction" if you must. im a huge fan of youtube obviously and its nice to see you try and keep up on problems and trying to offer temp quick solutions while people wait for the replacement caps at least, it sucks getting left in the dark, no matter how much money you've paid.

    thank you for making your products in a more REALISTIC price range.
  11. Jacob Arnold

    Jacob Arnold Nugking IG

    Messages:
    20
    Hey @therealvaporblunt can I get a coupon code :)
  12. Egzoset

    Egzoset 1SipAToke Vaporist (v3.0)

    Messages:
    2,622
    Location:
    Shawinigan/Qc, Canada
    Hi again,

    It shows.

    Idem.

    You too!

    :wave:
  13. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    FC420
  14. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    907
    My unit is being put through its paces by a patient and dear friend of mine, so far they love it. He is a not a pure vaporist but he does vaporize (I gifted him my SSV). I'm reporting for him as he lives far back in the woods and apparently dial up and FC don't mix if you get the picture. Anyway, ill share his unfiltered unedited thoughts about the unit. (He only has the base unit no HT but he does have the pong adapter for use with his glass). More to come. I do have a question though, my concentrate bowl doesn't look like the ones that were posted.
  15. guardian

    guardian Well-Known Member

    Messages:
    70
    Location:
    underwater
    i had a question or so for the VB creator, i was just curious what is the body of the unit made of for the vb 2.0 i'm not worried at all about it - it must be safe- but it was curious. also im not sure if its been discussed or not i tried reading the whole forum and didnt find it, what temperatures do each of the 5 lights correspond to? i know it has a range of 370-470 but approximatly which does each light represent. also a major question of mine is can it be used during charging? as well as how long does it take to charge since all units are different... ex: the pax charges in less than an hour where the inhalater inh004 takes 6 hours to fully charge. and sorry for so many questions but im just asking ones i dont think have been covered, are the batterys a pack? or are they just individual kind of like putting batterys in a remote? thanks TRVB hope to hear back
  16. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    907
    Battery life lasts considerably, the recharge time I've found to be an hour or two. It can be used while charging as long as its not completely dead. Although I believe it's not charging it's just being used as a pass through? (I believe that's what was mentioned). I've been meaning to open this puppy up and see what the guts look like (you almost had to with the original to actually clean clean it).
  17. eezy

    eezy New Member

    Messages:
    11
    Location:
    never tell
    ^^ at guardian
    Im not the creator, but I had the same question about the heat settings. I called the number on the website, the guy named Eric did not know exactly but took my number and said he would find out and call me back. an hour or so went by and he called me back. This is his answer setting 1) 370 F setting 2) 395 F setting 3) 420 F setting 4) 445 F setting 5) 470 F
    I hope this helps.
  18. TherealVaporblunt

    TherealVaporblunt Well-Known Member Manufacturer

    Messages:
    814
    This is correct. Happy Holidays to all!
  19. eezy

    eezy New Member

    Messages:
    11
    Location:
    never tell
    Does anyone know if there is a glass air path option for the vb 2.0? If so does it make it taste better?
  20. Spliff

    Spliff Nothing clever to say......

    Messages:
    35
    Location:
    Bay Area

    Merry Christmas VB
    Thanks for the video.
    Question, Why didn't you auctally use the EO bowl?
    Just an thought, but I think a video showing a hydra tube, glass straw, or whatever delivering its meds would be a useful tool to those perspective buyers.

    Can you do me (and anyone else interested in the VB2.0) a favor and post pics of all end caps, or attachments that the VB uses?
    Stir cap, EO bowl, (with and without Teflon), and both PonG attachments?

    I have been using the VB for nearly a month now and am just about ready to post my thoughts/review.
    Before I do though, few questions.

    1. Fate of the current stir knob/cap, EO bowl?
    2. Any other changes that might be made soon?
    3. VB policy on user replacing battery or opening unit and its affect on warranty, can you state it please?
    4. What materials are the stir cap, EO bowl, and the PonG attachments made of? (Currently)

    Thanks for getting those parts to me, and your continued presence here.
    Look forward to your answers and best wishes to you in this new year.

    Spliff
  21. Xchadb

    Xchadb Meltin pipe Glass Blower

    Messages:
    974
    Location:
    CO Springs
    still no video reviews? :\
    559stonerr likes this.
  22. KingBoo

    KingBoo Member

    Messages:
    43
    Location:
    PNW
    Man, I cannot wait until payday to pick this up! The wife gave the Ok for the basic unit now and a water piece later.
    OF likes this.
  23. OF

    OF Well-Known Member

    Messages:
    11,392
    Location:
    Left Coast
    Get something nice for the wife, she just did you a big favor.....

    Enjoy it when it gets there, I find mine getting a lot of use given it's 12 or so bowls per charge, easy and effective operation and good 'ergonomics'. Well though out and made tool, IMO.

    OF
    newVaper420 and KingBoo like this.
  24. KingBoo

    KingBoo Member

    Messages:
    43
    Location:
    PNW
    I'm one of those lucky guys whose wife who is into the same things I am. She wants to get rid of all of our old glass pieces except for a bubbler I've had for almost 20 years, a pipe, and maybe the current bong we have. I've got a giant 8 hose skull hookah, a straight 3 footer, and 4 footer, plus a bunch of half broken pieces. I'm getting the Vaportblunt 2.0 and taking just about all the old stuff to the dump. The wife will be happy for healthier toking and not as much old crap around.

    How is cleaning it compared to a bong? I've got to imagine that it's not as messy and cleanup is easier.
  25. OF

    OF Well-Known Member

    Messages:
    11,392
    Location:
    Left Coast
    Yup, she sounds like a keeper to me.

    Cleaning the VB is real easy. A pipe cleaner or two does a good job on the stem, brushing the bowl is usually sufficient for routine purposes. When you decide to get serious the screen liner for the bowl can be pushed out up the stem with a bamboo skewer or pried out and ISO soaked or boiled. You can then push a couple of patches of cloth or wads of cotton down the tube to your heart's content. FWIW I often find a freshly cleaned vape tastes a bit 'off' until the clean surfaces get a little vapor bit going, so you've just got to suck it up and take a couple of hits for the team......

    Compared to a bong, it's a walk in the park.

    Enjoy the VB, I'm really impressed with mine. Very good for casual use with serious overtones....

    OF
    KingBoo likes this.

Support FC, visit our trusted friends and sponsors