Vapman

axakal

Well-Known Member
now this here is first class teasing. just open the shop for pre-orders already or show us some heating station porn :)

Regarding the brightness of the lights, I can assure you that it will be very descreet. There is not even a led light on the outside of the panel, the light will be conducted through photoconductive plexy from the inside to the outside, nothing sticking out nor illuminating the surroundings. No bells, no bright lights, no vibrating, no smell! Only heating, breath in and breath out, you will hear your heart beat!:)

vapman
 

NorVape

Vape Rictim
Maaaan, @Nugg 's technique for reheating the Vapman makes the Vapman a one hitter quitter cloud machine!

For those of you who didn't catch it:

Vapman
Bubbler
Canna

Heat Vapman as usual.

Draw 'till the vapor in the bubbler starts thinning out.

Reheat, while the Vapman is still connected to the bubbler. Pay close attention, so you don't combust. Around four seconds of reheating is usually enough for me.

Repeat as many times as your lungs allow you to. Some good breathing techniques are required. I have poor beat up lungs after combusting since the age of eleven. Granted, they've gotten better after vaping took over for combustion, but my point is you don't need to be the king or queen of rips to enjoy this technique.

Warning: You might get intensly high. If done "right" you'll empty the bowl in one, maybe two, rips.

*fistbumps @Nugg*
 

hoyo77

Well-Known Member
Maaaan, @Nugg 's technique for reheating the Vapman makes the Vapman a one hitter quitter cloud machine!

For those of you who didn't catch it:

Vapman
Bubbler
Canna

Heat Vapman as usual.

Draw 'till the vapor in the bubbler starts thinning out.

Reheat, while the Vapman is still connected to the bubbler. Pay close attention, so you don't combust. Around four seconds of reheating is usually enough for me.

Repeat as many times as your lungs allow you to. Some good breathing techniques are required. I have poor beat up lungs after combusting since the age of eleven. Granted, they've gotten better after vaping took over for combustion, but my point is you don't need to be the king or queen of rips to enjoy this technique.

Warning: You might get intensly high. If done "right" you'll empty the bowl in one, maybe two, rips.

*fistbumps @Nugg*
Oh my!!!
 

friedrich

Little-Known Member
my Vapman is now sitting at the local post office I'll be picking it up this afternoon after work
I'm jealous... mine is still in Zürich as of the last update!

You guys are getting me excited to try this bad boy on my bong too :science:
Am I right in thinking it will fit nicely into the downstem's 14mm female joint? or is it necessary to rig up some sort of adapter?
 

M0J0

I am a leaf on the wind ~ watch how I soar...
I'm jealous... mine is still in Zürich as of the last update!

You guys are getting me excited to try this bad boy on my bong too :science:
Am I right in thinking it will fit nicely into the downstem's 14mm female joint? or is it necessary to rig up some sort of adapter?
The middle portion fits into a 14 mm glass female joint. It may mark the wood a bit after a few times, but if you search this thread, you'll find a few other ways to adapt it.

I think the series one is Ed's new mouthpiece.
 

OF

Well-Known Member
I think i would be leaving work early....lolololol

You really have to plan these things out carefully if you want them to work out well.

For instance if you'd have taken my advice and retired you could be waiting at home when it gets there, no needless delays. Retirement has other advantages, too. You've really no idea how much work can cut into a guy's vaping time.......

I recommend retirement.

OF
 

goetzamuel

Well-Known Member
Hey guys! So recently I noticed the center pin on the bowl has warn down, causing the mouthpiece to wobble around. Thus it doesn't form that great of a seal on the bowl. I've been vaping a lot of concentrates lately and thought maybe the higher heat may have contributed. I don't know though, anybody else have similar experiences?

Vapman_Side_zpsnlcvqnyt.jpg


Vapman_Top_zpsfxecunrt.jpg
 
Last edited:

Mr Mellish

Well-Known Member
You really have to plan these things out carefully if you want them to work out well.

For instance if you'd have taken my advice and retired you could be waiting at home when it gets there, no needless delays. Retirement has other advantages, too. You've really no idea how much work can cut into a guy's vaping time.......

I recommend retirement.

OF

I like the way you think but I'm forming the opinion that retirement is a thing of the past. My expectation is that I will have to die at my desk and, because of my physical position, they'll have to take me to the funeral home Aunt Edna style. (National Lampoon Vacation reference).

 
Last edited:

OF

Well-Known Member
My expectation is that I will have to die at my desk and, because of my physical position, they'll have to take me to the funeral home Aunt Edna style (National Lampoon Vacation reference --
).

If you don't have a better plan, that can well happen. IMO you really need to take responsibility for getting there early and in sound shape if you want to enjoy yourself. Working for family is fine and all, but this is a 'take care of number one' deal as well I think. For instance, get a house and pay it off? Bills are much easier to handle every month if you're not paying rent/mortgage. And the gas I'm not buying (or the string of lunches with workmates) frees up all kinds of bucks for herb and vapes.......

Through the years I knew guys who didn't come back the next day (including an office mate that keeled over in the BART (commuter train station) that last Wednesday afternoon, 2 years younger than me). And a lot of 'happy retirement' parties followed by sad news a year or two later.

Plan for life after work, and plan to make that happen sooner than later..

OF
 

RUDE BOY

Space is the Place
Hey guys! So recently I noticed the center pin on the bowl has warn down, causing the mouthpiece to wobble around. Thus it doesn't form that great of a seal on the bowl. I've been vaping a lot of concentrates lately and thought maybe the higher heat may have contributed. I don't know though, anybody else have similar experiences?
Vapman_Side.jpg
Vapman_Top.jpg


Shoot I'm new here! Don't know how to post pics

Not seeing the pics it Sounds more like the the hole in the SS filter of the middle section got enlarged. Don't see how the copper pin would "wear" down, though I could be wrong (it's happened before).
 

Nugg

Well-Known Member
@NorVape I'm glad you are having success with that technique!! I haven't had much more time to play with it atm. Sounds like you have definitely mastered it.

Now I really can't wait to get back to my Vapman. I'll try to snap some photos of it while I'm out in the bush this weekend.
 

Enchantre

Oil Painter
My VM has arrived! :)

OMFG it IS incredibly LITTLE! and clever. and beautiful! and it works amazing!!!!!!! I've done flowers and some shatter (I gots the screens....) and it's PERFECT!


except for the torch. Hubby couldn't get it to work, and it flamed all over a couple of times. well, life sucks cuz there's a vacuum in space... so, I have this tiny little AMAZING vape!

testing will continue....
 

OF

Well-Known Member
except for the torch. Hubby couldn't get it to work, and it flamed all over a couple of times. well, life sucks cuz there's a vacuum in space... so, I have this tiny little AMAZING vape!

This is a common problem with newly filled lighters. Lots of things can contribute (difference in gas used, residual air, etc.).

The best solution is to turn the feed valve down usually. It's almost certainly built around the fill valve, do you see a sleeve with a couple of 'screwdriver slots' around the fill hole? Try about half a turn CW, see what that does. You can go by sound, a strong hiss is too much.

I usually use one lighter (or a candle) to try the flame out rather than get poor ignition tied up in the problem. Obviously, if CW makes it worse, try CCW?

Good luck with it, a good torch makes a big difference I think.

OF
 

Enchantre

Oil Painter
Yeah. Hubby is all up with that stuff. It's defective.

It's okay, I have two others around here that I can throttle down enough to use with it,.... and it worked WELL.
 

M0J0

I am a leaf on the wind ~ watch how I soar...
Hey guys! So recently I noticed the center pin on the bowl has warn down, causing the mouthpiece to wobble around. Thus it doesn't form that great of a seal on the bowl. I've been vaping a lot of concentrates lately and thought maybe the higher heat may have contributed. I don't know though, anybody else have similar experiences?
Vapman_Side_zpsnlcvqnyt.jpg


Vapman_Top_zpsfxecunrt.jpg
@goetzamuel,

Wow, that really is a worn down pin. All that's left is a little nipple! I've never seen that before. I wonder if René has?

How old is that Vapman?
 
Last edited:

simpleasthcis

... As a box of ....
@goetzamuel,

Wow, that really is a worn down pin. All that's left is a little nipple! I've never seen that before. I wonder if René has?

How old is that Vapman?
Mine was looking bout the same after 7months Heavy use,I do admit an element of driver error and stoned meddling. twas a step learning curve for my first vape.good news is my second is in the post thanks René for a savage deal.
Smaller loads and more frequent cleaning this time, I'd tend ta get lost
In a session having to open it n look inside ( where was I at again) .

Wevapeople
 

Enchantre

Oil Painter
I did email, and I'll wait. :)

I've been playing with my VM, and I think I'm in LOOOOOOOOOOOVVVVVVEEEEEE :love:

Concentrate screen. Hash. Crumble. 4-4-4 AHHHHHHHhhhhh... repeat. ;)

It's the perfect portable dab rig! no hot nail, no breakable glass, and the perfect sized hit for me! :)

Amazing....
 
Top Bottom