Discussion in 'Plug-in Vaporizers' started by stonemonkey55, Nov 4, 2013.
Is it safe for the evo to be lying done instead of standing up when not in use?
It's not designed to set on it's side anyway. Wouldn't it tend to roll off of a flat surface. There might be something about the electronics and insulation to consider.
I have held it 90 degrees and pull from it. Then set it down. But I wouldn't set it on it's side. I've used it upside down enough times. But when it is at rest, all 4 feet are on the ground.
It's a long piece of glass internally. It sets tall unlike the Herbie
I'm also careful about the exposed parts of the bamboo.
F-ing love acetone, my number one favorite solvent for everything. But in the midwest all the meth-heads made it hard to come by. I have to put on coverall and a carhart to go buy it out here without drawing attention the way i normally look. That would be ideal, but, as long as im not going to melt a weld or due something toxic to the non-mesh part of the basket I'm okay with shortening the life span. I have plans to acquire vast quantities of ELBs to load my oz per week on the weekend and then seal them up for week long use. Maybe xD Self control and Clouds don't mix.
I would assume its about as safe as using it inverted, but i wouldn't leave it there for more than a minute or 2 because the recommneded invert time is like 90 seconds.
I lay mine sideways on my bed sometimes while i'm grabbing a new ELB or grinding, but would never leave it that way.
Weighted feet for the bottom of the EVO? I thought someone had them on Shareways but i can't find them anymore.
Damn, that sucks, didn't know acetone has anything to do with meth. If it's hard to get, then just get high-proof isopropyl alcohol, also friendly to glass, maybe not as friendly to stainless according to these tables (nut probably still okay): https://www.coleparmer.com/Chemical-Resistance
It doesn't clean as rapidly as acetone, but works and many people clean vape stuff with it.
It's also friendly to silicone and is disinfencting unlike acetone.
Why is there not a lip at the bottom, on the inside of the vapexhale nail????
Surely this would stop that bit of concentrate that always escapes the heat by rising???
I'm sure there is a reason or they would have done it....
I loaded a coarse grind till 80% full, didnt tamp it, got a good 5-10 hits at 1pm and wow the clouds.... Its like haze v3 at setting 4 or higher, the surprise ? I only used 0.09g, avb very even
have left my evo upside down for maybe 5 minutes hope she's okay
She doesn't feel a thing!
The EVO will mess you up!
I'll mess my EVO up! (like a cage fighter)
Well have to break myself of leaving it upside down for long periods. Perhaps not the best thing for putting stress on the socket.
Some added weight on the bottom would be helpful If I were to add feet to it.
Thought about some safety feature using the Velcro straps on the heat shield to perhaps anchor it more. They aren't of much use to me and get in the way when I want to pick up and set it down easily. Anybody have a fixed area, ideas or setup to keep your EVO anchored?
So glad that my main EVO has it's own grey colored power cord extension plugged in permanently into the back of the unit. Pluses? Well, Less plugging and unplugging from the unit. It likes that. Plus I can wrap the cord around the EVO to protect it when I put it away. Unravel and plug it into any of the PC cords I have handy. Misplaced them? Well I'll just unplug the monitor from my 2nd PC and attach it to the extention. Also there is less time and fuss with cable management.
There is nothing about the insulation or electronics that prevents EVO from laying on its side however if it is hot and in use you may not want to do that for too long.
Don't worry, not a problem. The electronics bay is separated from the rest of EVO by an LCP wall. Just don't leave it inverted for a long time because eventually heat will soak that compartment and heat ages electronic components.
Maybe @nenmayk can make an EVO stand like the 2qan. I would like to see some rubber feet on it though.
Edit: The stand can not block the air intake.
There is a slight inside notch on the front feet. So any feet placed there would tend to stay on better. Will give that some thought. The 2qan Mighty design is worth checking out. Guess the feet on the EVO doesn't necessarily have to be 4 separate feet for the best stability option. Even a full base that allows airflow to the bottom. Maybe an air filter to keep particles out.
I'm also thinking some overly elaborate base that might magnify the lighting from the bottom part of the bamboo. So you can tell what color your bamboo is without taking anything off of the top. Because for me, certain types of light can make the green almost invisible. Dream big FCers.
That sounds cool. It could be made of Lexan or maybe crystal . . .
When I first got my evo I was worried about anchoring....
Coming from and eq, I was concerned about the steadiness of the evo....
But I needn't of worried...
The evo is a different beast....
It likes to be held....
It's not the eq that stays planted, I think any sort of base, for me, would be unnecessary, and possibly evo get in the way and caus and accident....
I also wouldn't want the evo to weight anymore....
I like the weight proportions between the ht and evo... I think it works well as it is....
The only thing I would change with the evo is a rim on the inside of the nail...
Whats the most materials u guys packed and got nice thick clouds ?
Fine or coarse grind ?
At what temperature ? 380? 410?
2/3 full, blue dream medium grind, 440, and I filled my basement with a wonderfully tasty rip.
Seibo Shen with an instructional video and he will answer questions you post under it on YouTube
Click to play YouTube Video
I tested my OLD vaporizers.
For me the EVO is powerful FLAVOR/EFFECT + H2O + WELL GROWN CANNABIS = CIVILIZED
EVO = STILL the BEST (in my case)
So I'm taking a stay-cation today and plan to try my new EVO out for the first time. I've still got a touch of a cough, so I'm going to take it slow.
In the meanwhile, I thought I would pass on a handy solution for keeping one's Hydrabase stuck to your desk/tabletop. I bought one of those two sided sticky pads that you use to keep your GPS, phone, etc from sliding around your dash. While it's no doubt going to be a dust and lint collector, you can fortunately wash them with soap and water and they return to their original sticky glory.
Works like a charm.
Hi guys!After months of lurking around this forum,i am going to be civilized.My plan is to buy a cloud evo from vapefiend but can not decide on the glass...hydratube,attached to a bubbler or bong bought from dh gate?I know this is personal preference but i wanna hear what you guys think.
A very soon cloud evo owner
Im exited for you.....
Can't go wrong with Vapefiend....
It's nice to have an official vapexhale hydratube of some sort..... you may as well get it with a bundle so it's cheaper...
You can always add cheap dhgate pieces later...
This is just my opinion obviously....
If your in UK and you order now, you will get it for Saturday....
What he said ^^...
ok thanks,i am from the netherlands but i am leaning towards a official tube....i think its gonna be the hydrobomb that thing is a beast imo
i will keep you posted,next week i am going to order this pearl
btw vapes in rotation are extreme q,haze v3,storm,solo and the mighty but i never was so excited as about the evo!
Better than milaana ?
What glass pieces are those? Where u get lol
Vapexhale just put there Incycler on the website , w/$100 off code , use code FRESH , they say for the discount - https://www.vapexhale.com/collectio...6ccc3de6|2ca673a3-d3a2-4b4e-8f2a-5064a1b5eea7
Almost price of the whole unit plus a hydratube
Separate names with a comma.