Discontinued The Sublimator

[vakedcow]

I do count on the new version being hinted at to be released soon(ish)... with apollo heat shield, 220V and other great improvements not yet revealed (?)

that should at least protect the "bigger" kids

 

[stickstones]

I got my first drip...that didn't take very long!

 

[shredhead]

I got my first drip...that didn't take very long!

Ahha the amber drip........I have a stainless steel stir stick/screen placer for my sub, sometimes when I'm too lazy to grab a dabber I just shove that bad boy into my atty and grease it up for a dab. UFO is king for double deckers, even just straight oil. Might be a good idea for those that like oil through the Apollo but don't wanna bog their unit down?

 

[Been Vapin]

I usually don't dab BHO, but I have been hitting it heavily at around 33 to 35 watts in my failing Apollo. Even though the temp is not hot enough, there is pretty minimal waste, and it is much better than using a torch and ti nail. So much smoother and tastier.

Must be a Christmas miracle because I am at 37 watts right now. Highest in awhile.

 

[Been Vapin]

Last night I was at about 38 watts. This morning I am at 40 watts. Christmas miracle!e continue.s

 

[Greybong]

Hey Fellow Members, I am getting a Sublimator for x-mas & would like to pick up a screen for it, but can't seem to find the page with that thread on it , when this was previously discussed? I think it was an Iolite screen, but want to make sure before I pick one up today in anticipation for the Big Day !! Seen a lot of the videos with them putting them back in before a hit & know that it wasn't one of the ones supplied with the unit.

 

[stickstones]

I just use the SS screen that came with it.

 

[Your Highness]

Hey Fellow Members, I am getting a Sublimator for x-mas & would like to pick up a screen for it, but can't seem to find the page with that thread on it , when this was previously discussed? I think it was an Iolite screen, but want to make sure before I pick one up today in anticipation for the Big Day !! Seen a lot of the videos with them putting them back in before a hit & know that it wasn't one of the ones supplied with the unit.

Iolite fine mesh screens work perfectly for me. They fit perfect and comes out when you dump the load. I use a mini brush to clean them and have been using the same 2 screens for a few months without any major cleaning.

 

[Greybong]

Well Thank You Your Highness (funny that's how I reply to the wife sometimes !). Appreciate the info & will grab one of those in anticipation of the big day. Also my 1st vaporizer, so I'm pretty stocked !!

 

[Bob Loblaw]

Well Thank You Your Highness (funny that's how I reply to the wife sometimes !). Appreciate the info & will grab one of those in anticipation of the big day. Also my 1st vaporizer, so I'm pretty stocked !!

i use the iolite double woven. it fits better than the solid screen, imo

 

[Your Highness]

Well Thank You Your Highness (funny that's how I reply to the wife sometimes !). Appreciate the info & will grab one of those in anticipation of the big day. Also my 1st vaporizer, so I'm pretty stocked !!

The Sub is a very heavy hitter for a first time vape! Please proceed with caution... you are in for one heck of a ride!

i use the iolite double woven. it fits better than the solid screen, imo

Yeah I meant the double woven ones. I didn't know that's what they are called, but yeah they work great.

 

[stickstones]

you guys like these iolite screens better than the ones that come with the sub?

 

[Your Highness]

you guys like these iolite screens better than the ones that come with the sub?

yes! I have given up on those even though i found a way to wedge them in there pretty good. I find that popping in the Iolite screen and dumping it with the load is very efficient. And I also notice very clean sublimate since switching to these screens.

 

[Bob Loblaw]

yea, the screen is easier to clean by far, has better airflow and when used in tandem w/ an ultrafine down low means clean dark tack oil, almost like shatter.

but i prolly have made this comment more than any other by far
we need a broken record icon for variety

 

[Greybong]

Thanks Bob, I have read your replies on this subject, but with so many pages now on this thread I couldn't locate it. Appreciate your patience ! I will let you all know how she worked out for me as I'm like a little kid right now waiting for x-mas morning, I'll probably be up @ 4am plugging her in !! Cheers.

 

[stickstones]

I'll start fucking with my screens, then. I have an old iolite around here somewhere.

@Your Highness -- are you using a second screen below like bob?

 

[Bob Loblaw]

Thanks Bob, I have read your replies on this subject, but with so many pages now on this thread I couldn't locate it. Appreciate your patience ! I will let you all know how she worked out for me as I'm like a little kid right now waiting for x-mas morning, I'll probably be up @ 4am plugging her in !! Cheers.

no stress, man. more giving sticks a little grief than you

enjoy ur unit!

 

[stickstones]

I can take it...and most definitely deserve it!

 

[Your Highness]

I'll start fucking with my screens, then. I have an old iolite around here somewhere.

@Your Highness -- are you using a second screen below like bob?

I do not use a second screen... I might try it in the future but I haven't needed to do it so far.

 

[stickstones]

Which screens are you guys using...the three pack with metal casing or the fine mesh pack of 6?

http://www.vapeworld.com/parts/iolite-vaporizer-parts

 

[grokit]

@Greybong, welcome to fuck combustion!

It's a big forum, feel free to explore.

And if you feel like it you can introduce yourself here.

 

[weedemon]

I am using super fine on the bottom and coarse on top. want to try the iolite screens too though.

 

[stickstones]

update on screens

so after trying many of the suggested variations i have settled on my setup.
my goal was easy of use combined w/ how infrequently they required cleaning.
EDiT - i also wanted easy of draw, i.e. little restriction and effectiveness

i am still using the ultra fine screen set in the lower section
and in the upper i have chosen the iolite double ultrafine screen (it is double thick, 2 ultrafine screens woven together.

i have used this setup for 3-4 days straight now and haven't had to clean either of them and the lower screen looks fresh as a new daisy.

ok @Bob Loblaw -- I just searched this thread for Iolite screen and found you saying this over and over again! I was laughing thinking of you cussing me when I asked yet another time!

BUT --- can you link to these screens somewhere? I don't think I've seen these linked unless it is the ones on amazon for $12.95. But then which one would that be? you are the only one mentioning a double ultrafine. enrico is using the one with the metal enclosure in one video. anyhow, if you could link it, they will come!

 

[Bob Loblaw]

it is the 6 for 12.95

http://www.amazon.com/iolite-IEP-007-Fine-Screen-Vaporizer/dp/B004K684BC

also it's cheaper than straight from iolite

http://www.iolite.com/6-pak-fine-mesh-screens.html

no stress, just joshin' ya a little, lol

hope that helps!

 

[Your Highness]

ok @Bob Loblaw -- I just searched this thread for Iolite screen and found you saying this over and over again! I was laughing thinking of you cussing me when I asked yet another time!

BUT --- can you link to these screens somewhere? I don't think I've seen these linked unless it is the ones on amazon for $12.95. But then which one would that be? you are the only one mentioning a double ultrafine. enrico is using the one with the metal enclosure in one video. anyhow, if you could link it, they will come!

I have used both types and they both work. The double woven ones work better and keep your sublimate cleaner. I think these screens should have been what the Sub ships with. They drop right in and pop out effortlessly. And like I said before...a mini brush is all that's needed to keep them fresh and free flowing.