1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

The Persei Vaporizer for herbs and concentrates.

Discussion in 'Portable Vaporizers' started by THC SCIENTIFIC, Jan 13, 2012.

  1. hypez604

    hypez604 Well-Known Member

    Messages:
    4
    Location:
    San Jose, California
    So far so good ;]

    Evic basic doesn't last long though haha I'm "forced" to use the VTC dual. I think I like the dual TI sic and quartz heaters the most so far, but it's a bit early to judge overall. Also haven't tried using the little insertable ti sponges yet.
     
  2. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    Relaxing for the evening enjoying fresh pressed rosin in the SR-71 on the 8 with 2 18650’s and Nibbler.
    Call it old tech or whatever but in my opinion it still the best portable out there.
    Damn! Nothing tastes as good as good rosin in a clean Herc.

    Thanks again G! @THC SCIENTIFIC

    Edit: Forgot to add.....the Herc doesn’t care about particulates in Rosin like a cartridge does. A nice plus.
     
  3. Resinberg

    Resinberg Well-Known Member

    Messages:
    138
    Location:
    CA
    Does anyone have any links where I can find an adapter like this I have three Persei’s two brand new ! All the cartridges at my local dispensaries are 510 id love to be able to get some use out of one of those if this adapter would help me does anyone know ?
    Thanks [​IMG]
     
  4. jpdnkstr

    jpdnkstr Well-Known Member

    Messages:
    732
    Location:
    Third Coast
    The Persei people should have some... W9, UP Tech, I'm not sure of their current name or website but someone should chime in soon.
     
    Resinberg likes this.
  5. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    @THC SCIENTIFIC

    I really would love to have a way to use Bender on a 510 mod. How much power can the Bender rod handle if I get an adapter of some sort figured out?

    Thanks G!
     
    ataxian likes this.
  6. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
     
    ataxian likes this.
  7. Resinberg

    Resinberg Well-Known Member

    Messages:
    138
    Location:
    CA
    @THC SCIENTIFIC my persei stays on the second it comes in contact with the battery it’s on the button is not stuck it just simply stays on the entire time is there a solution to fix this do you guys service them if I send them in ?[​IMG]
     
    ataxian likes this.
  8. Mr. Gweilo 420

    Mr. Gweilo 420 Dude

    Messages:
    2,278
    Location:
    The Far East
    I thought the company wound up?
     
    ataxian likes this.
  9. Resinberg

    Resinberg Well-Known Member

    Messages:
    138
    Location:
    CA
    What do you mean wound up ? No longer in business ? Idk w9 still has a website and sells cartridges vapes parts all that what do you mean by this ?
     
    ataxian likes this.
  10. Mr. Gweilo 420

    Mr. Gweilo 420 Dude

    Messages:
    2,278
    Location:
    The Far East
    lol :doh::peace:
     
    ataxian likes this.
  11. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    ataxian likes this.
  12. invertedisdead

    invertedisdead High Standards

    Messages:
    4,454
    Location:
    The Full Spectrum
    I believe W9 was sold and Gary moved on to a different industry, he said something on Reddit months back about getting into the trucking/transport industry.
     
    ataxian likes this.
  13. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    I guess the question is to whom was it sold and will they remain in business?
     
    invertedisdead and ataxian like this.
  14. ataxian

    ataxian PALE BLUE DOT

    Messages:
    12,487
    Location:
    Pacific Ocean
    Da BENDER was the greatest invention by G.

    THe HAMMER with a common tread would have made him a $ 1,000,000,000?

    In the GREEN RUSH great inventions R made!

    CIVILIZED INVENTORS Get da GOLD
     
  15. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    I have two Benders. I wish I had a 510 adapter to make the Hammer work. Then I need a mod that can stay on that long.
     
    StormyPinkness and ataxian like this.
  16. ataxian

    ataxian PALE BLUE DOT

    Messages:
    12,487
    Location:
    Pacific Ocean
    I don’t want 2-tell U what 2-do!

    I’m not responsible 4-your actions?

    I use a MOD at less than 20 watts & an adapter.

    FLAVOR MACHINE if you LOAD it with CANNABIS?

    Wattage May be different than my setting?
    Start at 10 watts and work your way up until you find da sweet-spot!
    G knows more than most!
     
    StormyPinkness and jpdnkstr like this.
  17. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    Where did you find your adapter?
     
  18. SamuraiSam

    SamuraiSam Extraction Technician

    Messages:
    954
    Location:
    Spokane, WA
    This should get that job done https://www.w9tech.com/on-sale/hercules-71-74x-parts/510-to-601-hercules-adapter-bottom-insulator/

    That's a 601 female, 510 male threaded Hercules adapter/bottom insulator, when correctly adjusted with a flathead screwdriver it should allow transmission of electricity from any 601 cartridge threaded into it.

    I do not know if any rumors are true, I spoke to G last a few months ago shortly after meeting him for the first time in Las Vegas. I also got the idea that he was getting burnt out on the vaporizer business as he had more concepts and ideas than ever, which he could not afford to put in to production. It is a shame that the most powerful and innovative Triton heating elements may not ever see the light of day.
     
    ataxian, StormyPinkness and jpdnkstr like this.
  19. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    Hey Sam!

    I have one of those but I was hoping for something a bit more refined. Maybe I will just grab up another one and make a heat sink to go where the black ptfe part is.

    Good to hear from you man! Thanks!
     
    SamuraiSam, ataxian and jpdnkstr like this.
  20. foothilla

    foothilla Well-Known Member

    Messages:
    20
    I need a 601 to 510 adapter, so that I can use dispensary carts with my Persei. I can't find them anywhere. Anyone know where you can get them?
     
  21. foothilla

    foothilla Well-Known Member

    Messages:
    20
    ....and also, I have a ton of new W9TECH products that I want to sell. Anyone have a good suggestion on where I can legally sell them for a fair price? I am in Southern California.
     
    hektik8625 likes this.
  22. slozukimc

    slozukimc Well-Known Member

    Messages:
    311
    PM me. I may be interested in some of your gear for my W9tech collection.
     
  23. hektik8625

    hektik8625 Well-Known Member

    Messages:
    173
    Location:
    North County S.D.
    What part of SoCal? I’m in vista “) I’d be interested if you had a Hercules 1200 f rod. The older styled...

    Also to anyone who is listening. I received the triton oil system from W9 Tech and gotta say, after everything I have ever tried, this is above and beyond the best! How come nobody is talking about this?
     
    SamuraiSam and ataxian like this.
  24. ataxian

    ataxian PALE BLUE DOT

    Messages:
    12,487
    Location:
    Pacific Ocean
    I say and think the same of the BENDER?
     
    SamuraiSam and hektik8625 like this.
  25. foothilla

    foothilla Well-Known Member

    Messages:
    20
    I actually do have an older style Hercules, brand new, still in box. I also have a couple new V3 Persei's, a lightly used V4 Persei, new minicron in box, new omnicron in box (older version), 7.4v/3.7v power station (used once, in box), a bunch of new 2.4ohm and 1.5ohm carts, and a few old O-Phos pens (with some life left in them).

    I'm in Los Angeles.
     
    Last edited: Feb 11, 2019
    hektik8625 and SamuraiSam like this.

Support FC, visit our trusted friends and sponsors