1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

The Mighty by Storz & Bickel

Discussion in 'Portable Vaporizers' started by Roger D, Oct 16, 2014.

  1. bulleroi

    bulleroi New Member

    Messages:
    8
    My Packratz order conf states that I’ve ordered one small (Crafty) and one large (lately started to with Mighty). However, on Ryot.com there’s no large available.

    I’d take pictures of these but attaching pics from my phone is a mystery (well actually pain in the ass to browse to tinypic or similar ;) ).
     
    BornAgainSteama and BigJr48 like this.
  2. Vapor4me

    Vapor4me Well-Known Member

    Messages:
    68
    Packratz medium is great for the Mighty, and I'm very happy with their CS.

    Dimebag's OMERTA also looks like a nice alternative, but I have no experience with them.

    V4M
     
    Vaporcussion and BigJr48 like this.
  3. Choices

    Choices Active Member

    Messages:
    46
    Location:
    One state line from legal
    Hello to all the High and Mighty users. My newest acquisition arrived earlier today and I am anxious to give it a go. I must admit 500+ pages is a bit much to read through so would some veteran Mighty users mind offering up some first usage tips? Burn off needed? Any grinding preference? .1 gram okay? Loose or tight pack? Thanks so much I’m advance!
     
    blackstone and BigJr48 like this.
  4. Whissmu

    Whissmu Well-Known Member

    Messages:
    490
    for tastes --> colors :myday:...


    but I will tell you my preferences after 3 years of use with the mighty :2c:;
    -use always capsules
    -use several cooling units for a cleaning without speed
    -Use a small scale to load my capsules, usually about 0.30grams
    -use fine grinding
    - Birth of 175 degrees rising from 5 in 5 degrees to finish in 205 degrees where end my session
     
  5. Choices

    Choices Active Member

    Messages:
    46
    Location:
    One state line from legal
    How does one tell if their Mighty is the “newer” version? Is packaging different? Is there a way to tell based on serial number?
     
    Rollingstoned and BigJr48 like this.
  6. Stu

    Stu Maconheiro Staff Member

    Messages:
    9,286
    Location:
    southeast of disorder
    The "newer" ones have a sticker on the box that says something like "20% more batt life" IIRC.

    :peace:
     
  7. darbarikanada

    darbarikanada Well-Known Member

    Messages:
    237
    Location:
    ecotopia
    - no harm in a quick burn-off. probably not necessary
    - the grinder it comes with works great, but the mighty's very tolerant of different grinds
    - .1g is fine.
    - no need for a tight pack. if it doesn't reach the top of the bowl with a light tamp, put the liquid pad on top.

    I usually start @ 165ºC, increase the temp 5º every 2 hits or so. I get nothing but flavor at low temps. @ 175-185ºC, I usually get clouds and good flavor. above that the flavor's worse. at low temps, I find it helps to let it 'cook' for ~30 sec. after the vibration tells you you're at temp instead of vaping right away.

    you'll figure it all out fast. the mighty has a reputation for pretty much zero learning curve.

    my favorite thing: you never have to stir.

    btw: the ABV will be ocher, not dark brown. that's normal. people have put mighty ABV in higher-temp vapes to see if there was anything left (because it's not dark brown...) - there wasn't, color notwithstanding.
     
  8. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    I replaced the mighty CU stock screen with a double weave titanium screen. The double weave screen keeps things much, much, cleaner for a longer time. You can get them at new vape or errlectric but you need to cut them to fit and they last forever.

    :nod:
     
  9. Rollingstoned

    Rollingstoned Well-Known Member

    Messages:
    155
    Location:
    Socal
    It will have the %20 battery life sticker and “inhale the difference” logo on the front,
    Also the production date will be labeled on the box
     
  10. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    Here is an image from the interweb and it looks just like my new mighty.

    [​IMG]
     
  11. Grey hair

    Grey hair Flop shot guru

    Messages:
    75
    Can't say enough about the capsules.A great add on.
     
  12. blackstone

    blackstone Well-Known Member

    Messages:
    527
    I had a search and look back here, and around March '18 there were some reports that Mighty or Crafty units were appearing without sticker again but that it had the new battery by default.
    This might also have been people receiving old stock.
    From what I gather if your Mighty has a production date printed on box of 08-2017 or later, it quite certainly has the 20% better battery.

    This post below has pics of the two outer package styles available since the launch of the new battery c. Jan 18 and upgrades (if any).
    @Rollingstoned is correct that the last change many of us have heard of just for newer style packaging, is the one that will say "Inhale the Difference" on the front like these pics:
     
  13. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    Thanks for that...the newest box...inhale the difference...Sorry stoners, please forgive my mighty error. :cry:

    I think this is the newest box. :nod:

    [​IMG]
     
    Last edited: Nov 10, 2018
  14. wombat24

    wombat24 Member

    Messages:
    3
    As you were.
    Had the Mighty a month now. I'm a bit embarrassed to admit that I
    maybe a little obsessed with my Mighty. When I'm not using it (which
    is waaaay to often) I'm looking at it, cleaning it, touching it, reading
    about it (mostly here), thinking about it.
    Just as ChooChooCharrlie has gotten all evangelical on Shredder's idea of
    removing the CU screen when using capsules. I would like to advance Vapercussion's
    idea of using Firefly concentrate pads for microdosing. These things are great!
    Much better quality than the S&B ones (which I find hard to get in and out of the caps).
    They are a tighter, denser - you can fit 3 of them into a cap. For a micro dose I
    loosly fill a cap to 3/4's lightly tamp it down to about 2/3 using the packing tool and
    and place a pad and lid on top. For a nano dose I fill 1/2 way tamp down to 1/3 and put 2 pads
    on top, I was amazed that I was able to get 6 - 7 good hits from a nano dose (1 x 170C,
    3-4 @ 180C and 2 @ 195C) from an amount that if I had combusted in a bong I would have
    drawn it through after a second. Also a tip for removing the pads from the capsules, I use
    one of those Iphone key thingies and push through the middle hole on the bottom of the capsule.
    So if you have these pads give them a go and let me know what you think.
    Now a couple of questions
    When using capsules exclusively how often do you need to replace the chamber screen
    and clean out underneath it?
    I am determined not to succumb to VAS BUT if I were to have a (non battery) back up for my Mighty what would you choose? I have narrowed it down to a Dynavap Omnivap M or a Plenty. I use herb only and I dont mind playing with fire.
     
    Last edited: Nov 11, 2018 at 7:04 AM
    Vaporcussion and ChooChooCharlie like this.
  15. vapviking

    vapviking Well-Known Member

    Messages:
    1,777
    Location:
    USA
    All these pix of multiple Mighty boxes just make me want to order a new one, and there's nothing wrong with the one I already have!
    Like Kramer's movie line, "These pretzels are making me thirsty!"
     
  16. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    Since you have the Mighty I would get the vapcap M as it less expensive, very high quality, and gives a different taste and high than a convection vaporizer. Plus it is so damn small it is one of the easiest vapes to conceal.

    :2c:
     
    BigJr48 and wombat24 like this.
  17. bulleroi

    bulleroi New Member

    Messages:
    8
    Ok. So I’m having the out-of-the-box coarse screen on the Cooling Unit and then put a capsule in AND additionally a fine screen on top of the capsule. Tried to close the CU but there’s not room for the extra screen as the fine screen is wider then the ”hole” in the bottom of the CU facing the oven.

    When closing the CU It got twisted and seems that normally the capsule is very close to the screen of the CU. The extra fine screen got bended and at the first attempt got stuck to the CU. Then I pushed the fine screen to fit the airway hole on the CU. Worked well afterwards but I definitely need to replace the coarse screen on the CU with the fine screen unless the current setup keeps working well. Now - with extra fine screen loosely staying addionally to the CU - I’ll need to decide if I just should replace the coarse screen with the fine screen. Now the addional screen can be easily knocked out and cleaned over the sink, for example.

    Try and learn process. :)
     
    BornAgainSteama likes this.
  18. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    Hey my friend, @shredder suggested not even using a screen in the CU with the capsules. I just tried it and it works great. For now I have no screen in my cooling unit using capsules which is all I use in my mighty now. Maybe give it a try?

    :nod:
     
    Mainoffender and Koen like this.
  19. bulleroi

    bulleroi New Member

    Messages:
    8
    Sure, might give it a try soon and I’ve read about that method, too. But currently my aim is no reduce parts or dust of the herb getting to the cooling unit to lower the need of the CU cleaning.

    I’m all about stealthy use of herb as it’s illegal here. Plus due to my non-herb-accepting girlfriend I have limited possibilities to clean my vape.
     
    BornAgainSteama likes this.
  20. dzoinp

    dzoinp Well-Known Member

    Messages:
    90
    Location:
    Portugal
    My friends...please...don't complicate

    It's so easy to use this vaporizer...WTF!:doh:
     
    MonkeyTime and BornAgainSteama like this.
  21. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    Give a double weave titanium screen a try if that is your goal. Little to no debris and good airflow for about 8 bowls before you need to clean your double weave screen. The CU remains clean for much longer...it just gets a nice resin coat.

    https://www.newvape.com/titanium-screen-woven

    [​IMG]
     
    Last edited: Nov 11, 2018 at 7:28 PM
  22. Choices

    Choices Active Member

    Messages:
    46
    Location:
    One state line from legal
    Put my newest member of the collection through the paces this weekend. It really is, form and feature wise, the jitterbug phone of vapes. I don’t mean that as a slight but rather a nod to the simplicity of use, sturdy build, and intuitive controls and layout. I was caught off guard by how little draw resistance there is and the effectiveness as well. BTW it had no 20% more sticker but the manufacture month was April of this year. Glad I finally decided to pick one up! Now I’m really motivated to read through the thread!
     
    blackstone, BigJr48, dzoinp and 2 others like this.
  23. Tommybwell

    Tommybwell New Member

    Messages:
    6
    Thanks dzoinp!! I have wanted a Mighty for a while and was ready to pull the trigger but reading this thread started to turn me off. Between all the capsules, titanium screens and pads my head was spinning.
     
    dzoinp likes this.
  24. BornAgainSteama

    BornAgainSteama I'm proud to be a stoner, yes I am.

    Messages:
    310
    You don't know a good thing when you see it. The dosing capsules are fucking awesome. They change everything...but if they 'seem' too complex you definitely should avoid them.

    :nod:
     
    Mainoffender likes this.
  25. headdoctor

    headdoctor Well-Known Member

    Messages:
    178
    Location:
    Inner space
    Don't give up, Tommybwell! It looks like you're new out here. This site is not only an amazing source of information, reviews, and discussion, it's also a hobbyist's dream site. Folks get *into it.* If you want the schematics on a vape so you can rewire the heating element; or lengthy discussions about esoteric black market batteries that will CHANGE YOUR LIFE; or detailed explanations on how to blow your own glass to maximize your device--then this is the place for you.

    But it's also a wonderful place to sit back and enjoy other people's impressive obsessions and curiosities ... and then, with appreciation, skip all that and pick up a vape like the Mighty. It couldn't be an easier. vape to use, right out of the box. I LOVE reading about all the neat modifications and add-ons that people do out here, but I rely on these forums for much more than that--and much less.

    Good luck!
     

Support FC, visit our trusted friends and sponsors