1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

The Mighty by Storz & Bickel

Discussion in 'Portable Vaporizers' started by Roger D, Oct 16, 2014.

  1. pallfy

    pallfy Member

    Messages:
    55
    Location:
    Mighty
    The fit was snug, but required no effort to screw the c/u on.

    That's bad news about the mighty c/u being a reclaim factory and collecting some of the good stuff. I guess the solution is to buy that adapter you linked, and then cool it somehow, like through water (but doesent water absorb some of the thc/cbd too??) It seems like its hard to get around this, unless u bypass cooling and take the hit direct.

    This is why I brush the bowl out after EVERY use. You can replace the cooling unit, but not the oven. And now I use basket screens so no need at all, its completed protected.
     
    Last edited: Oct 31, 2017
    KidFated. and biohacker like this.
  2. Vaporcussion

    Vaporcussion Well-Known Member

    Messages:
    391
    Have you tried the glass mouthpiece yet? It definitely cools the vapor
     
  3. vapviking

    vapviking Well-Known Member

    Messages:
    1,536
    Location:
    USA
    This is the balancing act. Not easy to inhale directly at 365-410 degrees! so it's all about the vapor path and what happens in there. The Mighty's cooling unit is a little marvel, but not the only way to travel.

    The Grasshopper is nearly what you describe about direct hit; universally seen as a hot vape!

    Vapor (or condensed vapor) is an oil and doesn't 'dissolve' in water, but it does condense from the cooling process and will collect on the walls, etc., of water tool, and this is why the water tool itself needs to be cleaned regularly.

    And, note the word used for the gunk in c/u is often 'reclaim' and there are lots of ways of re-using it if you choose to.

    Sorry to be getting a little off-topic of the wonders of Mighty here. There are lots of other threads about all this, and all of it appears in earlier pages of this thread.
     
    ChooChooCharlie and KidFated. like this.
  4. Razshiro

    Razshiro Well-Known Member

    Messages:
    164
    Location:
    Milkyway
    finally i choose to pay 79€ for a new Mighty because I only had 5 months of warranty left and the S & B support seemed a little too robotic this time, every time I asked questions, they did not answer me or with an automatic template (maybe bad luck?!) ... hard to communicate with them this way, I've enjoyed more the RMA process when it was done by mail , have a contact with a real person who took the time to answer me, not only with automatic template like a robot.

    Here I am with a new Mighty, it seems lighter (yet it 's the same weight according to the spec), the warm-up time is not much faster compared to my old Mighty (happy to have chosen a brand new unit because I would have never had a new mighty for the housing problem like @luke00978 ). After 5 session yesterday,i still have 3 battery bar left, so it seems the battery is better (idk if it's 20% more battery like the new Crafty). The vibration is more smooth , the boost is not really usefull atm for me, we will see later if i give more use to this feature...
    Oh they have new box:
    [​IMG]

    GO back to normal activity - END of my RMA story , have a good day everyone :)
     
    Last edited: Nov 1, 2017
    Whissmu, Vapetrees, mitchgo61 and 7 others like this.
  5. luke00978

    luke00978 Well-Known Member

    Messages:
    151
    Location:
    United Kingdom Of Prohibition
    yeh its probs a good idea to pay, mine was free but it will be out of warranty in a month or 2, yours is $80 and presumably will be warranty-able for another 2 years, not a bad deal at all im just too tight to pay when i dont need to lol
     
    Razshiro likes this.
  6. vapviking

    vapviking Well-Known Member

    Messages:
    1,536
    Location:
    USA
    Well, the new box is certainly more attractive!
     
    Razshiro, jupazo and luke00978 like this.
  7. Mrbrown81k

    Mrbrown81k Well-Known Member

    Messages:
    87
    Location:
    Canada
    Anyone else's Mighty falling apart? The casing for it is breaking off and I keep having to push it back in. Once it comes off the oven is fully exposed. Not sure what to do
     
  8. vapviking

    vapviking Well-Known Member

    Messages:
    1,536
    Location:
    USA
    If you are still within warranty period, they will replace the housing or the whole unit, just start a claim on the website. The turnaround is pretty quick.
     
    ChooChooCharlie and graydeh1 like this.
  9. graydeh1

    graydeh1 Grayd Eh 1 Cannabis

    Messages:
    21
    Location:
    Toronto
    vapviking , contact S and B on the site for an RMA.

    I bought when they first came out a few years ago and my unit was early with the housing issue, it broke apart chunk by chunk, I received a brand new unit right near the end of my 2 year warranty period.
     
  10. Mrbrown81k

    Mrbrown81k Well-Known Member

    Messages:
    87
    Location:
    Canada
    I got it as a gift and dont have proof of purchase. How much do you think they charge to fix ? Ill probably get the batteries replaced at the same time since im down to 3 bowls per battery now
     
  11. Blackfriars

    Blackfriars Connoisseur of cannabis

    Messages:
    54
  12. Slagzord

    Slagzord Active Member

    Messages:
    31
    So, been on the case of the Mighty as soon as I heard about it a few years back but was happy with my Solo until it died on me.

    Anyways, fast forward to today. I'm sitting there sipping on a Crafty wrapping up my dad's new Mighty for his xxth birthday gift. Given I already took him to David Gilmore for Fathers day I'd say the old fart is getting spoiled in his golden years.

    He's been eyeing my Crafty for the past month, always asking me to pack it and let him use it instead of his Solo. So, I'm odds on that when he cracks open that gift box he'll lose his remaining marbles. I got an amazing deal on Puffitup, so the geezer is kitted out with a new grinder, a stand, and some of Randys random freebie candy.

    I've even left the wrapped gift in his living room two weeks before his birthday and dropped hints he is getting a new vaporizer.
     
  13. vapviking

    vapviking Well-Known Member

    Messages:
    1,536
    Location:
    USA
    I don't think even S&B will predict the charges until they have the unit in house and evaluate it.
    If you think it is less than two years old, then there's still a good chance the warranty will be honored given that S&B knows (by serial number) when they manufactured it.
    It's worth a try starting a request (via the website, since you'll rarely speak to a human on phone there). Lay out your story an see what they say.
    My years in business taught me, "Hey, it doesn't hurt to ask!"
     
  14. ktmstick

    ktmstick Well-Known Member

    Messages:
    172
    Location:
    Scotland
    When you start a warranty you get this as part of the reply

    "your repair request has been approved.

    Please send us:
    - Your malfunctioning device without Cooling Units and other accessories
    - Your printed Packing Slip
    - A copy of the invoice or proof of purchase
    (if you do not have this information, please let us know when and where you bought it.) "
     
  15. supremedepoulet

    supremedepoulet New Member

    Messages:
    6
    Location:
    Paris
    Hello everyone,

    I would like to know how you use you mighty:

    —How much did you pack in a capsule?
    —What’s the minimal amount you put in?
    —How tight you pack it?
    —What grind consistency?
    —What is your experience with micro-dosing?

    Personally, I’m going to test with 0.1 g in one capsule. For micro dosing I use 0.025 in a capsule with the liquid pad (I put the herb on top). For the grind consistency, I don’t like a too fine grind because it doesn't stay in the capsule. When I’m at home, I use the mighty on the charger: it heats up quicker and it saves battery cycle. I'm a happy proprietary of two mighty: one it's brand new from S&B Germany, the second is the very used mighty of a friend, I'd buy it for €100 and send it to rma, they give me a brand new one:rofl:.
     
  16. Whissmu

    Whissmu Well-Known Member

    Messages:
    262
    surely my situation has already been raised here but I did not find it ...
    my mighty is 23 months and the battery does not give me more than 3 sessions (without hurry) my battery clearly lost power but I do not know what to do next:
    -accept the loss of the battery and start being tied with the charging cable?
    - Is it possible to use the low battery warranty?
    -other ideas?
     
  17. Vaporcussion

    Vaporcussion Well-Known Member

    Messages:
    391
    Start a service RMA; they will look at it and tell you your options. They CS is excellent.
     
  18. kohr

    kohr Member

    Messages:
    19
    Hey what’s up all?

    I just finally got a Mighty today. I’m switching over from the DynaVap OmiVap, and a Pax2.

    I must say I was torn between the Mighty, and Crafty. I was afraid the Mighty might be too big as a portable. The pictures make it seem a lot bigger than it is. However it’s not that big, and fits great in my hands.

    I already have the glass on glass adapter, I’ll try it tonight with a pinnacle glass water tube I already had. Also bought bought the service kit, the delta3d studios stand, and glasss on glass fittings/medical grade tubing to connect the my Mobious dhgate bubbler. Also just ordered a pelican case to house the unit and accessories.

    This thing is pretty rad so far, will try tonight with the glass adapter and pinnacle water tube, can’t wait though till my adapters and tubing come to connect to my bubbler.

    My question though, what’s the best temps to use? I been playing around from 360f to ending by 380f.

    Here’s a pic of the vape. My puppy approves.

    [​IMG]
     
    Baron23, vapviking, Whissmu and 5 others like this.
  19. darbarikanada

    darbarikanada Well-Known Member

    Messages:
    200
    Location:
    ecotopia
    it depends on how much you care about flavor. I like to start at ~ 320ºf, take 2-3 hits, then up the temp by 5-10º, repeat, etc. - up to ~375º. at the low end you'll get pure flavor and extremely cool vapor - but (usually) very little in the way of clouds. at you go up, the clouds increase as the flavor deteriorates. my preference is to stay at each temp. until the vapor production goes way down; this (probably?) means you've vaped everything (e.g. terpenes) that vaporizes at that temp. then I go up and do the same.

    different strains will behave differently (some produce clouds at low temps; others need to go higher than usual to get clouds), but 0.1 g usually gets me ~12 vapes, so if I get 2-3 vapes at each temp, that translates into 4-6 temperature steps.

    this might sound complicated, but in practice it's easy - the mighty has practically no learning curve.
     
    kohr likes this.
  20. MAbud

    MAbud Member

    Messages:
    88
    My Mighty is only a month or two old and from Puff it up but I seem to have the old box...
     
  21. radiant34

    radiant34 Well-Known Member

    Messages:
    398
    anyone send the mighty in for warranty service past warranty? mine is literally falling apart..
     
  22. Mrbrown81k

    Mrbrown81k Well-Known Member

    Messages:
    87
    Location:
    Canada
    I need to also. The oven has become exposed, its all falling apart on me.. Plus the battery lasts max 3 sessions now.
     
  23. Vapetrees

    Vapetrees Vaped Out

    Messages:
    725
    Love the pup. Puppies are so much work though. I learned that the hard way. Mine is “sleeping” in her crate whimpering now that she hears me in the living room lol.
     
    Mr. Me2 and jupazo like this.
  24. Vaporcussion

    Vaporcussion Well-Known Member

    Messages:
    391
    Find my post from a few pages back and I describe that exact RMA experience, you'll be happy
    Just don't expect new batteries!
     
    jupazo likes this.
  25. Whissmu

    Whissmu Well-Known Member

    Messages:
    262
    thanks @Vaporcussion :bowdown::bowdown::bowdown: !! , i start service RMA !
     
    jupazo likes this.

Support FC, visit our trusted friends and sponsors