1. Thanks to some very special members we were able to help those in need.
  2. What does SSTB mean? See our glossary of acronyms.

The Magic-Flight Box

Discussion in 'Portable Vaporizers' started by magicflight, May 16, 2009.

  1. Bamafan86

    Bamafan86 Member

    Messages:
    24
    That I shall hopefully I don't have to wait to long.

    I well do that. Hopefully I will hear back by the end of the day.

    Mod note: When possible, please avoid making back-to-back posts in a thread. Use the Edit feature located at the bottom of your posts. Posts merged.
    Last edited by a moderator: Oct 28, 2013
    Vicki likes this.
  2. Vapologist

    Vapologist I believe in the Power of Higher.

    Messages:
    158
    Location:
    Vaporland
    Whats the cleanability factor on the trays in your experience?
  3. Quetzalcoatl

    Quetzalcoatl 200% THC

    Messages:
    3,839
    Location:
    SDCA, 3rd Planet
    What do you mean? How easy are they to clean? Torch red for 5 seconds, let it cool. Pretty easy especially since I use the tray with the screen specifically for clean clean oils.
    MileHighLife and Vicki like this.
  4. Vitolo

    Vitolo Vaporist

    Messages:
    5,741
    Location:
    The Vapor Trail
    I prefer the version without screen.
    Same thing... even for cruder oils.
    torch till red and your good.
    Quetzalcoatl and Vicki like this.
  5. S1N3

    S1N3 Tarzan @ The V.R.B.

    Messages:
    220
    14.4 mm Micro-shower Water Tool Attachment (VaporBlunt)
    Till Oct 31st the Water Tool is available for $50 USD + Free Shipping (Promo Code: PNWT50)

    [​IMG]
    steama, axakal, Trever and 5 others like this.
  6. sydnee

    sydnee Vaporus Majorus

    Messages:
    152
    Location:
    The Region
    Jahannum, RUDE BOY and Vicki like this.
  7. Jahannum

    Jahannum Well-Known Member

    Messages:
    94
    I like Momentum alot at the moment, ahh hell, I like most of them, I may buy one this week before stock runs out.
    sydnee likes this.
  8. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    905
    So I rarely ever swap batteries, but I charge them together anyways in case I do and I've been noticing the battery that doesn't get used still drains considerably, is this expected/normal? (Yes they're the glyphs).
    Kief likes this.
  9. Trever

    Trever Well-Known Member

    Messages:
    239
    Thats one killer deal just ordered! Thank you for the heads up!!
    S1N3 likes this.
  10. S1N3

    S1N3 Tarzan @ The V.R.B.

    Messages:
    220
    Happy to spread the word, here is the thread on the Glass Thread if you have any questions: http://fuckcombustion.com/threads/pinnacle-hydrotube.10406/

    Planet Vape offers something similar called a F-bomb but its still around $100 USD.

    Enjoy your purchase, the only thing I'd recommend is some kind of stand, see the last page of the thread I linked.
    Trever likes this.
  11. Vitolo

    Vitolo Vaporist

    Messages:
    5,741
    Location:
    The Vapor Trail
    My older batteries hold a charge when not in use, and it is demonstrated when I place them on the charger.... no blinking.
    My glyph batteries blink, at least for a good few minutes when I put them on the charger even when i have not used them.
    I can not intelligently speak about whether this is a trend, because I only own two glyph batteries.
    Next order, I will get more, and use strictly the glyphs for a while and watch for this.
  12. davesmith

    davesmith Well-Known Member

    Messages:
    100
    So I posted a whole ago about my box smoking and it seems to have got worse I just wanted to give some more detailed info. Hopefully get some feedback from
    You lovely people.

    So I get my box (after a quick brush down) and a fresh glyph battery. I depress the battery and wait..... After 35 seconds I begin to get serious amounts of smoke/vape. Easily enough to milk a hit ou of it.

    Do othe people experience this? What do you think it is? If its just oil build up then could I just hit it (lol). I'm just concerned as I was thinking of getting the pa2 but if my box canst handle the temps for oil then why bother?

    I'm a bit worried as last night I was doing some oil and didn't realise I'd let the box get too hot and was taking big hits of this mystery vapour. My throught is killing me this morning.

    Ill try post a video after work if you want to see the amount of vapour/smoke it produces.

    Thanks from a concerned English vaper
  13. Jahthunder

    Jahthunder New Member

    Messages:
    2
    On a slightly related note I had my first accident with the concentrate trays. In a an early morning bout of halloween enthusiasm I placed too much of some full melt on the screened tray and did not let it absorb fully into the pad. Needless to say some of it bubbled on to the box's screen. I am happy to report that it cleaned off easily with some 99% iso and my box still runs perfectly. So although it is always best to ere on the side of caution, I have learned that some oil on the screen does not guarantee a warranty service. Happy Halloween!
  14. pakalolo

    pakalolo RoboMod v3.17 (ticking) Staff Member

    Messages:
    5,471
    Location:
    Other side of your screen
    There is nothing in the LB that is any more dangerous than whatever you've been vapourizing. Resin builds up underneath the screen and that's what causes the vapour you're seeing. Hit it without fear.

    If you use material that hasn't been completely dried, the resin accumulates faster. I've been using my LB for years and the buildup is still minimal, but others have produced a lot of resin in a short time due to material differences. It's difficult but not impossible to clean out that resin without damaging your screen. Lots of people have successfully scraped some of it out but there is no way you can get it all. If you have the PA and you're really determined, you can stand the LB on end with the draw hole down, heat it up, and a lot of the resin will eventually flow out. This can get really messy and might permanently stain the area around the hole. I did this as an experiment and used a screenless concentrate tray to catch the resin. I got quite a few hits out of it. If the build-up under your screen is really heavy then be careful you don't overflow whatever you use.
    davesmith and MileHighLife like this.
  15. davesmith

    davesmith Well-Known Member

    Messages:
    100
    I was just scared that maybe at those higher temps the rubber ring or a bit of solder (or god knows what) might be giving off fumes. If not then horay! Ill be saving those hits for if I ever run out of weed lol
  16. pakalolo

    pakalolo RoboMod v3.17 (ticking) Staff Member

    Messages:
    5,471
    Location:
    Other side of your screen
  17. davesmith

    davesmith Well-Known Member

    Messages:
    100
    Thanks people you've really put my mind at rest.

    I've got a day off today and I've got a hangover so launch box and a crap movie here I come!
    TwztedElegance likes this.
  18. Bamafan86

    Bamafan86 Member

    Messages:
    24
    I just received a email yesterday they would be sending out the correct replacement. I was really luckily with this one because I used the first replacement a due time without noticeing the mistake
    Quetzalcoatl and Vicki like this.
  19. paravians

    paravians New Member

    Messages:
    2
    I got my MFLB this morning and first thing I put the batteries in the charger, LEDs went red and batteries kind of warm. I thought it was doing its job. After 7 hours it was still solid red so I got worried and removed the batteries. Now I am reading the manual (finally!) and it says that the batteries come already charged and re-charging may damage them since the charger does not recognize if they are already charged or not. Have I damaged my batteries?? I tested one and it's 1.4V (with no load so not a very useful information but still high voltage, I was expecting 1.2V) and inserted in the box it appears to work, the tray becomes warm (did not try herbs in it though).
  20. RUDE BOY

    RUDE BOY Space is the Place

    Messages:
    1,816
    @paravians Stick some herbs in that box and try it out, Only way you will know if the batteries are OK. I suspect they are still fine and you should be good to go. Hope that's true.
    PEACE and Enjoy your new Magic Flight. :mflb::tup:
    poonman, Vitolo, OF and 1 other person like this.
  21. paravians

    paravians New Member

    Messages:
    2
    Thanks, I love this forum!! There's been no discharge from the top of the batteries (there's holes for discharge) so I am quite optimistic but I now realize that they were quite warm in the charger (don't know yet how warm they become when charging for real). Heck assuming that I've done something wrong, they should add a flashy note saying "do not charge the batteries straight away because the charger can't tell if they are already charged or not!".
    OF and RUDE BOY like this.
  22. RUDE BOY

    RUDE BOY Space is the Place

    Messages:
    1,816
    A lot of us "top off" the batteries when we get them. Don't worry they do get pretty warm when on the charger I do think its best to let them cool down before using them but i'm not certain it really matters.
    Quetzalcoatl and Vicki like this.
  23. Pcpvapors

    Pcpvapors Well-Known Member

    Messages:
    905
    A friend of mine is having a really hard time with a smelly box, his flowers are always dry and he's maybe put 1.5 grams through the box meticulously using ISO after each session. Could he do a "burn off" (empty trench insert battery) to maybe aid in stench?
  24. RUDE BOY

    RUDE BOY Space is the Place

    Messages:
    1,816
    He can try a burn off, the box really can only smell like what you vape. Mine has seen lots of herb in the last four years or so and just smells like AVB. If I have really dank bud it will help to do a "dry burn" to get it back to a more Popcorn type smell. Once used I don't know that you can have an odor free box.

    I don't leave the house that often with my MF so I don't ISO clean very often But one thing to be careful of IMHO is sloshing extra ISO under the screen where it mixes with the herb residue.
    That's just my take on it though.
    Last edited: Nov 4, 2013
  25. OF

    OF Well-Known Member

    Messages:
    10,628
    Location:
    Left Coast
    Bummer. Your bud may have done himself in. "meticulously using ISO after each session" is not a recommended practice, IMO for good reason. Washing off the part you can (probably something like 25% since you can't wash the bottom surface or sides of the mesh) doesn't represent a lot.

    My guess is what's happened is the odd drops of contaminated ISO dripped into the wood (carrying the smell with it). Normally this would be covered by normal deposits (which don't get a chance to build up in the dozen or so sessions in a gram and a half).

    Yes, I'd try a burn off. And also start following the instructions on cleaning?

    OF
    jpdnkstr, Vicki and RUDE BOY like this.

Support FC, visit our trusted friends and sponsors