1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

Supreme Vaporizer

Discussion in 'Portable Vaporizers' started by nysuperscum, Nov 30, 2008.

  1. Morty

    Morty Well-Zoned Member

    Messages:
    455
    @vapirtoo :lol:. What can I say, I've been enjoying my new vape. ? for ya. How does the thickness compare between the AIWB & the straight glass stem. Would be cool to have a little bit longer vapor path & a carb for direct draw. Been sticking all kinds of stems in the Supreme :disgust: (some worked, some didn't) & am finding the thicker the glass, the more restricted the draw. Figured I'd ask you b4 shelling out $20. The thickness of the straight glass stems are just about perfect for me. :D

    Edit: Just ordered the AIWB. We'll see how it goes. I think I got SAAS. Supreme Accessories Acquisition Syndrome!

    @Tommy10 It should come w/ a red & white grommet/seal. Stick the white one over the end of the aluminum tube to make a seal w/ an 18mm female joint. Instead of using just the red one for 14mm females, use the trick @Buildozer suggested a page back. Put the white grommet on 1st, then the red grommet on after. Using the red 14mm seal by itself makes it a PIA putting it in & taking it out. Using both, it just sits right on top of the 14mm F joint. 100% better experience.
     
    Last edited: Jun 27, 2017
    seaofgreens, Gray Area and Hogni like this.
  2. lazylathe

    lazylathe Almost there...

    Messages:
    2,790
    Location:
    Ontario, Canada
    @Morty

    I only have the S1 and S3 so far... The S2 is proving to be more difficult to procure!

    BTW: Love Rick and Morty! Best cartoon to come out in a while!!
     
  3. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    I'm not even sure what's coming with my supreme But been told it will go into 14 and 18mm so I'll just go from there. Been in my state capital since Friday but that doesn't mention customs.
     
    Last edited: Jun 28, 2017
    seaofgreens, Morty and Gray Area like this.
  4. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    I'm not sure if you have been privy to the same pic as me, but I also converse with Ed regularly, and it's not that prototype. It's MUCH simpler! Hopefully we see something by the end of the summer.

    @Morty welcome to the show! :tup:
     
    highasakite, Morty and lazylathe like this.
  5. Vitolo

    Vitolo Vaporist

    Messages:
    8,622
    Location:
    The Vapor Trail
    Yes I have the pic.... and have posted it here earlier, but photobucket images no longer show up here.
    I am aware that is not the prototype of the current project.
    I make this comment, because my photobucket accounts have 1000+ images, and I know that my images from 7 years of posts in this forum are now invisible.
    Many of you will face this.
    I found a workaround that sometimes works.
    If you see this:
    [​IMG]
    Left click it and select "view image".
    You will be taken to photobucket to that particular image.
    Once in a while you will see what you see above, there at photobucket.
    Sometimes it shows the image well.... It also gives the direct link to the image that you can copy and use some of the time.
    Sometimes all it shows is the image above.
     
    Last edited: Jun 30, 2017
    Morty likes this.
  6. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    I don't recall seeing the pic posted here, and Ed told me to never post it, so I feel like we're talking about different things here. He's just finalizing the enclosure. PID will be required. Not saying anymore :lol:
     
    Morty, psyshaman, lazylathe and 3 others like this.
  7. CheeseSandwich

    CheeseSandwich Well-Known Member

    Messages:
    723
    Location:
    Canada
    That is :mmmm:

    On demand supreme hits will make my life complete.
     
    Morty, lazylathe and biohacker like this.
  8. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    Not a matter of if, but rather when... and again, MUCH simpler than you think!

    Anyone get the dually yet? :lol: Still trying to figure out the point of it myself... just quick change different strains without pulling stems? :hmm:
     
  9. vaporist4LIFE

    vaporist4LIFE Well-Known Member

    Messages:
    241
    And the power of double kick !! Like that's necessary :D
     
    biohacker, Morty and lazylathe like this.
  10. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,279
    Location:
    Berlin, Germany
    Just got my much-awaited package from my US courier. Hoooray, my Supreme is finally at daddy - I thought. A lot of stuff from GHL (Bats + PFE), DDave (some coolers for Mi and VC - and for the GH too), from Pipes (Skeletor and PS) and....:hmm:..???....and..:huh:...???...:o....???......nothing!!..:(

    My Supreme didn't arrive!!! Don't know whether my friend has it forgotten in the US. Hope he just forgot to put it in the package for me!?

    I'm deepest disappointed....just a half good day....
     
    Alexis, Morty and vaporist4LIFE like this.
  11. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    Okay, I get it now - for my massive iron lungs! I can usually crush a bowl in one rip, so the dually would allow another massive one with ease. Hmmmm, and I thought my VAS was in check, obviously not! With my present virgin tolerance though, this one i'm going to think about, but hey - always nice to have a backup right? :D

    @Hogni wha'happened?? So sorry to hear that... was hoping for another new cult fan member here! :lmao:
     
    lazylathe, Morty, Hogni and 1 other person like this.
  12. Hogni

    Hogni Honi soit qui mal y pense

    Messages:
    1,279
    Location:
    Berlin, Germany
    Friend, i don't know. When my US courier fetched my delivered orders from the addressee in the US this guy wasn't at home. So he took all what he saw and brought it along to Germany. But the package from Ed he didn't saw. Unfortunately the addressee is still on vaccation so we can't ask him. Hope the package was not lost or stolen from the stairs of the addresses house. There was a J-hook gifted by Ed in too.
    It's sadden me a lot.....before the postman ringed and I opened the package I was excited like a little boy on Xmas eve......now I could :puke:
     
  13. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Click to play YouTube Video
     
    Last edited: Jul 3, 2017
  14. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Must have put 15 bowl through it. This is what I know from my initial use
    Con
    I'm gonna have to get down on glass stem tek that hot ass metal one is a pain
    Can't see temp in the dark
    Need a better torch hands free set up

    Pros
    Biggest Vapor clouds I've ever experienced
    Coughing fits
    Watering eyes
    Runny nose
    I could hear the space between my ears ringing.
     
  15. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    Welcome to the club Tommy10! We've gone a long way since we've met in the HerbalAire days bro!

    Glass stems are a must! Soon glass GonG's will be coming from @PeteSeattle ...

    Handsfree torches require butane...i must prefer using propane for cost as well as speed.

    Sounds like you could dial the temp down a smidge? Supreme provides the silkiest smoothest vapours i've ever experienced. Are you grinding or using whole nugs? Nugs are way smoother, and tastier IMO!

    Enjoy the flower dabs from the cult of Supreme! :rockon:
     
    PeteSeattle, Morty, Tommy10 and 2 others like this.
  16. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Whole nug, been hitting it at around 205 don't mind the cough. Isn't it just the silkiest Vapor around. I normally don't taste Vapor too much. HA is probably one of the better tasting vapes I've tried. The sheer amount of velvety smooth Vapor that pours over your taste buds through the supreme, can't help but taste it.

    Also if anyone knows why Nitros bulbs are called nangs in Australia will understand the ringing head sensation I speak of after three bowls back it back
     
    vaporist4LIFE and biohacker like this.
  17. biohacker

    biohacker Fucking Combustion Since 2006

    Messages:
    5,421
    Okay, try lowering your temps! 204 I believe is the highest that Ed says you should push it to. Start at maybe 160-170 and see what flavour country is all about bro! My personal fave temp is around 185ish give or take. You can still get nice silky dense clouds at lower temps with this bad boy! Try a coarse grind too!

    So happy you're stoked on it! Can't think of anyone that hasn't been! Good to have you here bro! When are you pulling the trigger on the DUALLY?? ;):lol:
     
    Last edited: Jul 3, 2017
  18. vapirtoo

    vapirtoo Well-Known Member

    Messages:
    847
    Location:
    NYC
    Tommy10, what kind of torch are you using?
    Over 200c is kind of overkill with all of the flavor
    leaving after that first pull. You also need iron lungs
    to deal with those kinds of hits. As Biohacker recommends try
    a hit at 180 and see how you like it.
    Anyway welcome to the heavy hitters club, and let the feedback flow
    so our Supreme posts stay on top.
     
    Buildozer, Hogni, Gray Area and 2 others like this.
  19. vaporist4LIFE

    vaporist4LIFE Well-Known Member

    Messages:
    241
    Glad you are enjoying Tommy !! No way that beast could sit in a drawer it had to go somewhere :)
     
    Tommy10 and biohacker like this.
  20. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Yesssss!!! Greatly appreciated it's loving the new home.
    Been using one of those disposable propane things with the removable nossel. Taking heat away around 190 gets just above 200. Will try some low temp ones later for flavour, but never been a flavour man and at 205 the flavour is already overwhelming for me.
    The metal tube, with the offset rib, the rib goes in last so it's at the lower end of the stem? Or first so it's closer to the block?
     
    vaporist4LIFE likes this.
  21. vapirtoo

    vapirtoo Well-Known Member

    Messages:
    847
    Location:
    NYC
    The rib goes in last to keep the paper clip screen holding the herb in place.
    The screen stem should be just barely sticking out as you push it into the block
     
    Hogni, vaporist4LIFE and Stu like this.
  22. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Yea that's how I've been doing it. Thermometer is fucked. Temp jumping around like wild, any suggestions ?
     
  23. Gray Area

    Gray Area Well-Known Member

    Messages:
    590
    Only time the heat jumps around for me is if the flame gets a little too close to the thermometer's wires that are next to the block (under the silicon sleeve).
    Try aiming the torch toward the upper part of the block (well away from the wires) and see if it stabilises...
     
    Buildozer, Morty, Hogni and 1 other person like this.
  24. Morty

    Morty Well-Zoned Member

    Messages:
    455
    Chilling w/ a buddy watchin' Westworld. Letting the bong soak, so we're using the Vapocane adapter w/ the 18mm j hook Ed sent me & the Vapo2 AIWB I just got. 2 loads convection style, & 1 using the AIWB later, my friend who never vapes blurts out,"Simple & effective. I like this more than through the bong"! BINGO. Direct draw can be the shiznitz! Some say the convection high can be kinda "fluffy". Not w/ this vape. Feel like it fucks me up more than medium temp fat rips through the bong.

    Click to play YouTube Video
     
    Last edited: Jul 4, 2017
  25. Tommy10

    Tommy10 Well-Known Member

    Messages:
    1,227
    Running two of the larger single flame butane torches on either side flame lock, gotta sit them on my bud container to get the height, might glue a plastic lid to the rubber removable base for the height. Preferring this to the propane torch. Anyone got any good links to nice double or triple flamers the right height with a flame lock? Or a really powerful single flame butane? The large butane torch I have is for stripping paint and it's shit, don't like how it and the propane don't self ignite and the sheer size. Will upload a video of current set up. Enough butane for a few good loads, right height flame lock and preferably 2+ flames is what I'm chasing here.
     
    highasakite and Hogni like this.

Support FC, visit our trusted friends and sponsors